Praktika T-05(K) speedgate 10
5. Transportation and storage
Speedgate in its original packaging shall be transported by air, by
road and by railroad with protection from direct exposure to rain and dust
without range limitation. It is allowed to stack boxes in 2 rows during
transportation and storage if Euro-pallets used. Keep the speedgate in dry
(no moisture condensation) heated places within +1 to + 40 °C temperature
range. Avoid vapors of acids, alkalis, and corrosive gases at the storage
place. Storage of speedgate in the original package in a dry unheated
premises or closed transport containers is permitted for short periods, no
more than 3 days. Before startup, the speedgate must be kept in a room
with normal climate conditions for 12 hours after storage in unheated
rooms.
Dimensions of container - 1280х800х1650 mm (HxWxL).
6. Safety requirements
CAUTION! Failure to comply with the safety requirements specified in
this section may result in damage to human life and health, total or partial
loss of workability of products and (or) auxiliary equipment.
CAUTION! Specific guidance on the use of the speedgate:
1. The sensors are installed in the stands of speedgate at a height of 820
mm.
Children shorter than 820 mm cannot be identified by the speedgate.
Children must be accompanied by adults in charge when passing through
the speedgate!
