Panasonic KX-HNS102 Bedienungsanleitung

Installation Guide

Wireless Motion Sensor

Model No. KX-HNS102

Thank you for purchasing a Panasonic product.

Please read this document before using the unit and save it for future

reference.

For assistance, visit our Web site: http://www.panasonic.com/help

for customers in the U.S.A. or Puerto Rico.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Installation

RWhen opening holes in walls for

installation or wiring, or when

securing the power cable, make

sure you do not damage existing

wiring and ductwork.

Operating safeguards

RDo not disassemble the product.

RNever put metal objects inside the

product. If metal objects enter the

product, turn off the circuit breaker

and contact an authorized service

center.

RDo not place the product in a

microwave or on an electromagnetic

cooking appliance. There is a risk of

overheating, smoke, fire, and

rupturing.

Medical

RConsult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW. Wi-Fi features

operate between 2.412 GHz and

2.462 GHz with a peak transmission

power of 100 mW.

RDo not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

CAUTION

Installation and location

RDo not place credit cards or other

objects sensitive to magnetic fields

near the magnet. The magnetic field

could cause the object to be come

unusable.

Battery

RDo not mix old and new batteries.

RDo not open or mutilate the

batteries. Released electrolyte from

the batteries is corrosive and may

cause burns or injury to the eyes or

skin. The electrolyte is toxic and

may be harmful if swallowed.

RExercise care when handling the

batteries. Do not allow conductive

materials such as rings, bracelets, or

keys to touch the batteries,

otherwise a short circuit may cause

the batteries and/or the conductive

material to overheat and cause

burns.

RDo not recharge, apply heat,

disassemble, or place in fire.

RDo not touch metal or other objects

to the battery terminals.

RIf electrolyte leaks from the battery,

do not touch the electrolyte or allow

it to come into contact with the eyes.

Electrolyte that has leaked from a

battery can cause blindness if it

2For assistance, please visit http://www.panasonic.com/help

Installation

enters the eyes. If electrolyte enters

the eyes, do not rub the eyes. Flush

them with clean water immediately

and seek medical attention.

RKeep out of the reach of small

children. There is a risk of

swallowing. If the battery is

swallowed, seek medical attention

immediately.

RRemove the battery if it becomes

unusable. There is a risk of leakage,

overheating, and rupture. Do not

attempt to use a battery if it is

leaking.

RDo not intentionally pour water on

the battery or allow it to get wet.

There is a risk of fire and smoke. If

the battery becomes wet, remove it

immediately and contact an

authorized service center.

RInsert the terminals of the battery

correctly. There is a risk of

overheating, burns, and electrolyte

leakage if the battery is inserted

incorrectly.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Do not use this product near water

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement or near a

swimming pool.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible

Panasonic units use radio waves to

communicate with each other.

Environment

RKeep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

RThe product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

RThe product should not be exposed

to direct sunlight.

RDo not place heavy objects on top of

the product.

RThe product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

temperature is less than 0 °C (32 °F)

or greater than 40 °C (104 °F).

Damp basements should also be

avoided.

Routine care

RWipe the outer surface of the

product with a soft moist cloth.

RDo not use benzine, thinner, or any

abrasive powder.

For assistance, please visit http://www.panasonic.com/help 3

Installation

Notice:

• This product is designed for use in

the United States of America. Sale

or use of this product in other

countries may violate local laws.

• Cet appareil est conçu pour être

utilisé aux États-Unis d’Amérique.

La vente ou l’emploi de cet appareil

dans certains autres pays peut

constituer une infraction à la

législation locale.

• Este producto está diseñado para

usarse en los Estados Unidos de

América.

La venta o el empleo de este

producto en ciertos países puede

constituir violación de la legislación

local.

• ҁౢࠔ஑ࣁ୯٬ҔԶ೛Ƕӧځд

୯ৎᎍ୧܈٬ҔǴёૈ཮ၴϸ྽Ӧݤ

ٯǶ

• ࡇࡢ〇ရࡣࠊ᪥ᮏᅜእ࡛ࡢ౑⏝ࢆ┠

ⓗ࡜ࡋ࡚タィࡉࢀ࡚࠾ࡾࠊ᪥ᮏᅜෆ

࡛ࡢ౑⏝ࡣἲᚊ㐪཯࡜࡞ࡾࡲࡍࠋᚑ

ࡗ࡚ࠊᙜ♫࡛ࡣ᪥ᮏᅜෆ࡟࠾࠸࡚ࡣ

ཎ๎࡜ࡋ࡚ಟ⌮࡞࡝ࡢࢧ࣮ࣅࢫࡣ⮴

ࡋ࠿ࡡࡲࡍࠋ

4For assistance, please visit http://www.panasonic.com/help

Installation

FCC and other

information

This device complies with Part 15 of

the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

Privacy of communications may not be

ensured when using this phone.

CAUTION:

Any changes or modifications not

expressly approved by the party

responsible for compliance could void

the user’s authority to operate this

device.

NOTE:

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable

protection against harmful interference

in a residential installation. This

equipment generates, uses, and can

radiate radio frequency energy and, if

not installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications. However, there is no

guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful

interference to radio or television

reception, which can be determined by

turning the equipment off and on, the

user is encouraged to try to correct the

interference by one or more of the

following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from that

to which the receiver is connected.

– Consult the dealer or an

experienced radio/TV technician for

help.

Some cordless telephones operate at

frequencies that may cause

interference to nearby TVs and VCRs.

To minimize or prevent such

interference, the base of the cordless

telephone should not be placed near or

on top of a TV or VCR. If interference is

experienced, move the cordless

telephone further away from the TV or

VCR. This will often reduce or eliminate

interference.

FCC RF Exposure Warning:

RThis product complies with FCC

radiation exposure limits set forth for

an uncontrolled environment.

RTo comply with FCC RF exposure

requirements, the base unit must be

installed and operated 20 cm

(8 inches) or more between the

product and all person’s body.

RThis product may not be collocated

or operated in conjunction with any

other antenna or transmitter.

RFor body-worn operation, the

handset must be used only with a

non-metallic accessory. Use of other

accessories may not ensure

compliance with FCC RF exposure

requirements.

Notice:

For assistance, please visit http://www.panasonic.com/help 5

Installation

RFCC ID can be found inside the

battery compartment or on the

bottom of the units.

6For assistance, please visit http://www.panasonic.com/help

Installation

Physical features

ABC

Infrared sensor

Status light

Slide switch

Registration button

Wall mounting

Using Cover A

1Remove the cover.

2Attach Cover A to the wall.

xx mm

(xx in.)

3Attach the camera to Cover A.

Using Cover B

1Remove the cover.

2Attach Cover B to the wall.

3Attach the camera to Cover B.

For assistance, please visit http://www.panasonic.com/help 7

Setup

Specifications

RFrequency range

DECT:

1.92 GHz–1.93 GHz

Wi-Fi:

2.412 GHz–2.462 GHz (channels 1–

11)

8For assistance, please visit http://www.panasonic.com/help

Setup

Two Riverfront Plaza, Newark, NJ 07102-5490

Printed in China

Andere Handbücher für KX-HNS102

Inhaltsverzeichnis

Andere Panasonic Zubehör Handbücher

Panasonic

Panasonic MA27077 Bedienungsanleitung

Panasonic

Panasonic MA3X791 (MA791) Bedienungsanleitung

Panasonic

Panasonic HG-C1000L Series Bedienungsanleitung

Panasonic

Panasonic MA4Z713 Bedienungsanleitung

Panasonic

Panasonic MA2J113 (MA113) Bedienungsanleitung

Panasonic

Panasonic HL-C201F Bedienungsanleitung

Panasonic

Panasonic VF Series Bedienungsanleitung

Panasonic

Panasonic EX Series Bedienungsanleitung

Panasonic

Panasonic WX-LA20 Leitfaden

Panasonic

Panasonic HL-D3 Series Bedienungsanleitung

Panasonic

Panasonic HG-TC101 Bedienungsanleitung

Panasonic

Panasonic LS-400 Series Bedienungsanleitung

Panasonic

Panasonic ADP5100 Bedienungsanleitung

Panasonic

Panasonic Light Emitting Diodes LNJ0F1C5FRA1 Bedienungsanleitung

Panasonic

Panasonic HG-S Series Bedienungsanleitung

Panasonic

Panasonic KX-TGA20 Bedienungsanleitung

Panasonic

Panasonic MA2DF31 Bedienungsanleitung

Panasonic

Panasonic MALS068 Bedienungsanleitung

Panasonic

Panasonic MALS180X Bedienungsanleitung

Panasonic

Panasonic KX-HNS102C Bedienungsanleitung

Panasonic

Panasonic CF-VPF Series Bedienungsanleitung

Panasonic

Panasonic Touch Pen Montage- und Bedienungsanleitung

Panasonic

Panasonic MA2SP06 Bedienungsanleitung

Panasonic

Panasonic LS-H F-A Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Bedienungsanleitung