Panasonic F-PXV55M Bedienungsanleitung

F-PXV55M

12~14

FURTHER INFORMATION

FAQ

BACK COVER

TROUBLESHOOTING

SPECIFICATIONS

OPTIONAL ACCESSORIES

SETTING AND OPERATING REQUIREMENTS

SAFETY PRECAUTIONS

Thank you very much for purchasing this Panasonic product.

Please read these operating instructions carefully before operation and maintenance.

Also, be sure to read the “SAFETY PRECAUTIONS” section (P.2~4) before use.

Failure to comply with instructions could result in injury or property damage.

Make sure that the correct information is written on the warranty card, including the date of

purchase and the name of the distributor. Keep the warranty card in a safe place along with the

operating instructions for future reference.

Warranty card attached

Air Purifier

Model No.

This product is for indoor use only

OPERATING INSTRUCTIONS

CONTENTS

OPERATION

BACK COVER

OPERATION

MAIN PARTS IDENTIFICATION

POWER OFF/ON·AIR VOLUME·ECONAVI

PM2.5·TIMER·CHILD LOCK

SETUP

MAINTENANCE

WHEN IDLE FOR A LONG TIME

CLEANING METHOD

FILTER REPLACEMENT

2~4

7~8

9~10

11~12

CONFIRMATION

AND SETUP MAINTENANCE OTHER

INFORMATION

PRODUCT FEATURES

SAFETY PRECAUTIONS Please strictly follow

→

In case of any abnormality or

malfunction, stop using the

product immediately and

disconnect the power plug.

(Otherwise, electric shock, fire or

smoke may occur.)

<Examples of abnormality/

malfunction>

The product stops operating when

moving the power cord.

If any switches do not work.

If the circuit breaker is tripped or when

fuse blows.

If the power cord or power plug

becomes abnormally hot.

If you notice a burning smell or an

abnormal sound or vibration.

If there is any other abnormalities or

malfunctions.

Please stop using the product immedi-

ately and disconnect the power plug,

and contact the dealer to check and

repair.

CAUTIONWARNING

WARNING

The safety precautions should be strictly followed in order to prevent injury or damage to properties.

Those things shown in this column indicate that

there is possibility of causing death or severe

injury.

Those things shown in this column indicate that

there is possibility of causing minor injury or

damage to properties .

This symbol indicates an action that must

not be performed.

This symbol indicates an action that must

be performed.

The following symbols differentiate the levels of danger or injury that may result if the product is

not used correctly as instructed.

The following symbols are used to indicate the type of instructions that need to be followed.

(The symbols given below are examples)

Do not pull the power cord

when carrying or storing the

product.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electric shock.)

Do not damage the power cord

or power plug.

Do not cut, modify, excessive distort,

twist, squeeze the power cord, and do

not place it near heat sources, place

heavy weight on it, etc.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electric shock.)

Do not insert your fingers,

metallic objects or others into

the air inlet, air outlet or gaps.

(Otherwise, you may be hurt by the

inner units with the possibility of

electric shock or injury.)

Do not let the product get wet.

Do not place cups, etc. on the

product.

(Otherwise, the product may

short circuit with the possibility

of fire or electric shock.)

This product is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervi-

sion or instruction concerning use of the product by a person responsible for the safety.

Children should be supervised to ensure that they do not play with the product.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

Disconnect power supply before maintenance.

Please strictly follow

SAFETY PRECAUTIONS

When carrying the product,

please hold the left and right

handles, but not the louver or

front panel.

(Otherwise, the product

may fall off, injury

may occur.)

Do not use power other than

the rated voltage.

(Otherwise, the power cord may

overheat and induce fire.)

Do not touch the power

plug with wet hands.

(Otherwise, electric shock

may occur.)

WARNING

→

Do not disassemble or modify

the product.

(Otherwise, the product may catch

fire or malfunction, thus resulting in

fire or electric shock.)

Contact the dealer for repair.

Clean the power plug

regularly.

(If dust is found on the power plug,

insulation maybe damaged by humidity

and fire may occur.)

Disconnect the power plug and wipe it

with dry cloth.

When the product will not be used

for a long period, disconnect the power

plug.

Insert the power plug

completely.

(If the power plug is not fully inserted,

the power cord may be overheated,

thus resulting in fire or electric shock.)

Do not use damaged power plug or

loosen power socket.

CAUTION

Do not place the product in

the following places.

Incline and unstable place.

(Otherwise, the product may fall over

and injury may occur or damage the

product.)

Where the temperature or humidity is

extremely high, or watery area, such as

bathroom.

(Otherwise, current may leak with the

possibility of fire or electric shock.)

Where oil fume is emitted, such as

in kitchens.

(Otherwise, the product may crack and

injury may occur.)

Where oil or inflammable gas is present

and may be leaked.

(Otherwise, a fire may occur due to

ignition in the product.)

Where the air outlet faces animals or

plants directly.

(Otherwise, it may cause discomfort to

the animals and dry out the plant.)

Do not place the product near

combustible materials such as

lighted cigarette, incense, etc.

(Otherwise, these may be absorbed

into the product with possibility of fire.)

When disconnecting the power

plug, hold the power plug

instead of the power cord.

(Otherwise, the power cord may be

damaged with the possibility of fire or

electric shock.)

Keep the room well-ventilated

when using the product

together with a burner.

(Otherwise, carbon monoxide poisoning

may occur.)

This product cannot remove carbon

monoxide.

CONFIRMATION

AND SETUP

Please strictly follow

SETTING AND OPERATING REQUIREMENTS

Area that can enhance the effectiveness!

Way to against PM2.5 and indoor dust, etc.

Way to circulate air more effectively.

Place the product with its left, right and top about 30 cm or more away from walls, furniture or

curtains, etc, otherwise, the pollutants are difficult to be cleared.

To ensure effectiveness of this product, keep its back at least 1 cm away from the wall.

Since PM2.5, dust, etc are likely to float in the air near

the floor, we recommend you to place the product on

flat floor in the room.

CAUTION

SAFETY PRECAUTIONS

Do not sit on or lean against

this product.

(Otherwise, the product may fall over

and injury may occur or damage the

product.)

Families with children should pay more

attention.

→

Do not clean the product with

gasoline or other volatile mix-

ture solvents, and avoid con-

tacting with spray insecticides.

(Otherwise, the product may crack or

short circuit with the possibility of injury,

fire or electric shock.)

Do not operate this product in

places where indoor fumigation

type insecticides are being used.

(Chemical residue may build up inside

the product and discharge from the air

outlet, and cause damage to health.)

Ventilate the room with fresh air thor-

oughly after using insecticides before

operating the product.

→

Do not set the product in the

following places.

Where the product will be exposed directly to

sunlight, outlet air of air conditioner or heat, etc.

(Otherwise, deformation, degeneration,

discolor or malfunction may be occurred.)

Near equipment such as TV and radio.

(Otherwise, visual disturbances or noises may be

caused.)

Keep the product 1 m or above away from such devices.

Do not use the same power socket

with TV, radio, etc.

(Otherwise, visual disturbances or noises may

be caused.)

In this case, insert the power plug into another

power socket.

If the product is used in the same

place for a long period.

It may result in dirty surrounding walls or

floor. We recommend that you move the

product away from where it is placed when

maintaining it.

Do not place any object on the

product.

(Otherwise, an operation error or malfunction

may be caused.)

Do not place obstacles on the product

air inlet and outlet.

(Otherwise it may affect product performance.)

nanoeTM X are particulate ions containing hydroxyl radicals whose amount is 10 times that

of nanoeTM.

The so-called nanoeTM X are charged water purification particles

generated by applying high voltage to separate water molecules.

4. More hydroxyl radicals (up to 4,800 billion of radicals are generated per second).

5. Weak acidity (with weak acidity features close to that of hair and skin).

About nanoeTM X

Note: nanoeTM and the nanoeTM mark are trademarks of Panasonic Holdings Corporation.

nanoeTM X features: high moisture content, small particles,

high stability, etc.

1. High moisture content (the moisture content is 1,000 times the

moisture content of ordinary anions).

2. Small particles (about 5 nm - 20 nm (nanometers) in size, able to penetrate deep into the fiber

and stratum corneum).

3. High stability (6 times more stable than a common ion, covering a distance of 10 m

or above).

All of the above features have been tested by SGS-CSTC Standards Technical

Services Co., Ltd.

PRODUCT FEATURES

“House Dust Catcher” and “nanoeTM X”

give you clean and fresh air.

House Dust Catcher completely cleaning dust from the air near

the floor

Equipped with nanoeTM X technology

Low power consumption in the Econavi mode

CONFIRMATION

AND SETUP

Control panel

Front Back

MAIN PARTS IDENTIFICATION

Filter replacement

indicator

Power Off/On

button

PM2.5 button/

indicator

Child lock button/

indicator

Air volume button/

indicator

Timer button/

indicator

Econavi button/

indicator

PM2.5 pollution

indicator Light sensor

Control panel Air outlet (nanoeTM X emission outlet)

Odor sensor

Power cord

Power plug

Handle

(left and right)

Front panel

Dirt sensor

Air inlet

(both sides)

Air inlet

(front)

Louver

Clean sign

nanoeTM X indicator

Dirt sensor and Odor sensor

Filter replacement indicator

Dirt sensor can detect air pollutants such as

PM2.5(0.7~2.5 µm particles), etc. Odor senor

can detect odor such as smoke, etc.The sensitivi-

ty of sensor can be adjusted. (P.13)

Clean sign

Blue: indicates clean

Red (small): indicates slight dirty

Red (large): indicates dirty

Show the air pollution levels detected by dirt

sensor and odor sensor. The clean sign can be

turned off (P.14) .

The indicator lights on indicates you need

to replace HEPA composite filter. (P.12)

The indicator lights on indicates nanoeTM X is

being generated. nanoeTM X will be generated

in all operation modes except you switch off

it. ( P.12).

nanoeTM X indicator

Light sensor

Detects the indoor brightness by the light

sensor, the product can automatically adjust the

brightness of indicators and the air volume.

After you go to bed, it becomes dark in the

room, then the product will switch to the “Sleep

Mode Auto Operation”. (P.14)

PM2.5 pollution indicator

The indicator lights on indicates PM2.5 pollu-

tion reaches a certain level. You can use PM2.5

mode at this moment to remove PM2.5 quickly.

(P.10)

Notice

Before startup Install filters

SETUP

Remove the front panel.

Toggle the filter hook upward, and remove filters

(2 types).

Remove the deodorizing

filter from the poly bag.

Please don’t remove the black net

of deodorizing filter.

Poly bag

Deodorizing filter

(wrap in black net)

Front panel

Pull it forward

with both hands

Pull it forward

with both hands

Fill in the label

with the first

date of use.

Remove the deodorizing filter

from the poly bag.

HEPA composite filter

Make sure to read page 2~4 before

setting up the product.

CONFIRMATION

AND SETUP

Notice

Install filters Power-on

SETUP

Toggle the filter hook downward,

and secure filters.

Deodorizing filter

Be sure to install front panel

before use.

Install the filters (2 types) and front

panel.

Connect the

power plug.

Install deodorizing filter.

(There is no distinction

between inside and outside,

upper and lower)

Install HEPA composite filter.

(There is distinction between

inside and outside, no distinction

between upper and lower)

Install front panel.

Fit the clutch into the indentation

(2 places) of product.

When inserting the power

plug, as the odor sensor uses

the degree of cleanliness at

this time as the standard, we

recommend that you plug it in

when the air is fresh (when

there is no cigarette smoke).

(The standard of the odor

sensor automatically updates

itself according to the degree

of the indoor cleanliness.)

Push in the protrusion into the

holes (2 places) of product and

press properly.

HEPA composite filter

With the black side (front side)

outward, fit it into the concave

part of product.

Concave part

of product

Press button, then

the clean sign blinks for

about 5 seconds.

Filter hook

Down

(Indicator

lights on)

Smart power-saving mode.

Press the button again to cancel. ( indicator lights off)

(Can also be canceled by pressing button)

Econavi

Press the button will operate in Econavi mode. Econavi is a smart power-saving

operation combined by the “patrol mode” and “learning mode”, and it adjusts

the air volume automatically. (P.13)

OPERATION

Press the button again, the product stops operating.

Turn on or off the product.

Press the button to operate.

The product operates in auto air volume mode when it is used for the first time,

then operates in the last mode when it was stopped.

Power Off/On

(Indicator lights on)

Purify air quickly.

Purify air in medium speed.

Purify air quietly in low speed.

Select appropriate air volume for purifying air.

The indicator will be changed sequentially as figure below.

Automatically adjust the air volume according to the

air pollution detected by sensor, and use appropriate

air volume to purify air.

Air volume

Power Off/On

button

PM2.5 button/

indicator

Child lock button/

indicator

Air volume button/

indicator

Timer button/indicator Econavi button/indicator

(Indicator lights on)

(Long press 3 sec)

Long press the button for 3 seconds, then the child lock is set. With this

setting, other buttons are disabled when you press them, with sound “BI-BI-”.

To prevent child from wrong operating.

Long press the button for 3 seconds again to cancel.

( indicator lights off)

Child lock

Do not shake the louver with hands during operation.

(Otherwise, the angle and action range may change accordingly.)

→Please stop operating the product immediately if it is shaken.

(The product will restore to the normal status after it restarts.)

If power failure occurs when product is operating, the product will restart automatically when power

on again, and operate in the mode when power failure.

OPERATION

Indicator

lights off

The indicator will be changed sequentially as figure below.

Timer operation.

Timer

2 hours timer

The product will stop operating after 2 hours.

4 hours timer

The product will stop operating after 4 hours.

Cancel timer

8 hours timer (sleep mode)

Clean sign and air volume indicator light off, indicators on

control panel dim, and the product operates at low speed,

then stops operating after 8 hours.

Notice

Remove PM2.5 quickly.

Press the button again to cancel.

( indicator lights off) When operates in PM2.5 mode, timer

cannot be set.

(Indicator

lights on)

PM2.5

When indicator is on, you can press the button to remove PM2.5 quickly,

until the indicator lights off. (At this moment the PM2.5 mode will stop,

then product will switch to the previous mode and continue.) But, If you press the

button when indicator is off, the PM2.5 mode only will operate in 1 min,

then product will switch to the previous mode and continue.

Notice

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Luftreiniger Handbücher

Panasonic

Panasonic F-PXT175H Bedienungsanleitung

Panasonic

Panasonic F-PBJ30M Bedienungsanleitung

Panasonic

Panasonic FP15JU2 Bedienungsanleitung

Panasonic

Panasonic F-VXM35H Bedienungsanleitung

Panasonic

Panasonic F-P16X8C-ES Bedienungsanleitung

Panasonic

Panasonic F-PXL45A Bedienungsanleitung

Panasonic

Panasonic ET-RFE300 Bedienungsanleitung

Panasonic

Panasonic HEPA Logic EH3015 Bedienungsanleitung

Panasonic

Panasonic F-VXR70H Bedienungsanleitung

Panasonic

Panasonic ziaino F-JPW50H Bedienungsanleitung

Panasonic

Panasonic F-VXL95M Bedienungsanleitung

Panasonic

Panasonic F-PXH55H Bedienungsanleitung

Panasonic

Panasonic EH3015 - AIR PURIFIER-PHCC Bedienungsanleitung

Panasonic

Panasonic F-VXH50H Bedienungsanleitung

Panasonic

Panasonic F-VXL40H Bedienungsanleitung

Panasonic

Panasonic F-PXV35M Bedienungsanleitung

Panasonic

Panasonic FV-01VCN1 Bedienungsanleitung

Panasonic

Panasonic F-PXU70A Bedienungsanleitung

Panasonic

Panasonic F-VR901 Bedienungsanleitung

Panasonic

Panasonic FV-15CSD1 Bedienungsanleitung

Panasonic

Panasonic F-PXM35A Bedienungsanleitung

Panasonic

Panasonic F-VXV70H Bedienungsanleitung

Panasonic

Panasonic FP15HU2 Bedienungsanleitung

Panasonic

Panasonic FP15HU1 Bedienungsanleitung

Beliebte Luftreiniger Handbücher anderer Marken

IKEA

IKEA UPPÅTVIND Bedienungsanleitung

Nash

Nash AP-1 PureSmart Bedienungsanleitung

LG PH-U450 Series Bedienungsanleitung

DeLonghi

DeLonghi DDSX 220WFA Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Bedienungsanleitung

Sharp

Sharp FU-40SE Bedienungsanleitung

Philips

Philips AC2721 Bedienungsanleitung

TruSens

TruSens Z-2000 Bedienungsanleitung

Motorola

Motorola MBP87SN Bedienungsanleitung

Beko

Beko ATP 7100I Bedienungsanleitung

Carrier

Carrier INFINITY 1620 Bedienungsanleitung

AtmosAir

AtmosAir P2002 Bedienungsanleitung

Winix

Winix NK300 Bedienungsanleitung

Friedrich

Friedrich C-90A Bedienungs- und Montageanleitung

Surgically Clean Air

Surgically Clean Air JADE2.0 Bedienungsanleitung

Base aire

Base aire 555 Pro Bedienungsanleitung

Champion

Champion CP25 Bedienungsanleitung

vollara

vollara Air & Surface Pro+ Bedienungsanleitung