Panasonic Circuit Protector Elements UNHZ203 Bedienungsanleitung

This product complies with the RoHS Directive (EU 2002/95/EC).

Circuit Protector Elements

Publication date: November 2006 SQB00036BED

UNHZ203

Circuit Protector Elements

For overcurrent protection

■Features

•Sharp cutoff characteristics and low voltage drop

•Flame retardant package and low heat generation, high density

mounting is possible.

■Absolute Maximum Ratings Ta=25°C

Parameter Symbol Rating Unit

Operating ambient temperature Topr −55 to +125 °C

Storage temperature Tstg −55 to +125 °C

■Usage Notes

•Package shall be overheated and dangerous for overcurrent.

•This device should be used only to the secondary circuit.

Package will be damaged for added overpower.

•This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.

Parameter Min Typ Max Unit

Rated voltage 50 V

Rated current 1.2 A

Internal Resistance 35 46 57 mΩ

Cutoff current *2.4 A

■Electrical Characteristics Ta=25°C ±3°C

Note) *: Measurement condition of cutoff current shall be at Ta=25°C, t =1 s

Tolerance of cutoff current shall be ±20%

Marking Symbol: H3

Unit: mm

SMini2-F1 Package

5˚

1.25

±0.1

0.7

±0.1

2.5

±0.2

1.7

±0.1

0.4

±0.1

0 to 0.1

(0.15)

0.16

0.5

±0.1

+0.1

–0.06

0.35

±0.1

0 to 0.1

Lead Connection

This product complies with the RoHS Directive (EU 2002/95/EC).

UNHZ203

2SQB00036BED

−25 150250 100 12550 75

0.6

1.1

1.0

0.9

0.8

0.7

Cutoff current ratio

Ambient temperature T

(°C)

Cutoff current ratio TaI2t t

Cutoff current characteristics

10 10

= 25°C

Cutoff line of real ability by pulse

Limit line of real ability by pulse

Recommendable limit line by pulse

t (ms)

t (A

•ms)

0642

−3

−1

−2

+20%−20%

= 25°C

Cutoff current (A)

Cutoff time t (s)

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

–Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

–Any applications other than the standard applications intended.

(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

 Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

Inhaltsverzeichnis

Andere Panasonic Netzwerk-Hardware Handbücher

Panasonic

Panasonic PN261693D Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA3X727 (MA727) Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC4805G Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC5846 Bedienungsanleitung

Panasonic

Panasonic Zener Diodes MAZSxxx Series Bedienungsanleitung

Panasonic

Panasonic WJPB65M16 - VIDEO OUTPUT BOARD-WJSX650... Bedienungsanleitung

Panasonic

Panasonic Phototransistors PNZ154NC Bedienungsanleitung

Panasonic

Panasonic PIN Diodes MA2SP060G Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC4562G Bedienungsanleitung

Panasonic

Panasonic Circuit Protector Elements UNHZ204 Bedienungsanleitung

Panasonic

Panasonic Multi Chip Discrete UP05C8GF Bedienungsanleitung

Panasonic

Panasonic K-NL404K/G Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA3Z7930G Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA6J786Y Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC3931 Bedienungsanleitung

Panasonic

Panasonic Switching Diodes MA3J142AG Bedienungsanleitung

Panasonic

Panasonic ESD Diodes MAZE062D Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA2SD31 Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC3930G Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA27D270G Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC2480 Bedienungsanleitung

Panasonic

Panasonic Switching Diodes MA36132E Bedienungsanleitung

Panasonic

Panasonic WJ-SX850 Bedienungsanleitung

Panasonic

Panasonic Switching Diodes MA6X128 (MA128) Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung