Panasonic WJ-NX200K Bedienungsanleitung

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

The model number is abbreviated in some descriptions in this manual.

Installation Guide

Network Disk Recorder

Model No. WJ-NX200K

Network Disk Recorder WJ-NX200

Contents

Introduction.............................................................................................................................. 4

Standard accessories ............................................................................................................................................................... 4

About the user manuals ............................................................................................................................................................4

About Additional Camera Kit (option) .......................................................................................................................................5

About Secure Communication Kit (option)................................................................................................................................5

About the business intelligence function (option) ..................................................................................................................... 5

Precautions for installation........................................................................................................................................................5

Basic operations .......................................................................................................................................................................7

Setup menu...............................................................................................................................................................................9

Operations flow ..................................................................................................................... 10

1 Obtain the license (Registration Key) ............................................................................. 12

2 Installation of the hard disk drive.................................................................................... 13

Install the hard disk drives ......................................................................................................................................................13

(When replacing the hard disk drives)..................................................................................................................................... 14

3 Rack mounting .................................................................................................................. 15

Installation procedure..............................................................................................................................................................15

4 Connections ...................................................................................................................... 16

Connection of cameras and a mouse .....................................................................................................................................16

Connection of monitors ..........................................................................................................................................................17

Connection of a PC.................................................................................................................................................................18

How to use the terminals of the ALARM/CONTROL .............................................................................................................. 20

Connection example for emergency recording.......................................................................................................................20

Time and polarities of the ALARM/CONTROL connector.......................................................................................................24

5 Turn on the devices........................................................................................................... 25

Turn on the power of the recorder .......................................................................................................................................... 25

(When turn off the power of the recorder)...............................................................................................................................26

6 Register the license (Registration Key) .......................................................................... 27

7 Configure the minimum settings [Easy Start] ................................................................ 29

Troubleshooting..................................................................................................................... 32

Important Information

Refer to the Important Information (PDF) in the provided CD-ROM for the following items.

Safety Information · Important safety instructions

Introduction · Preface · System requirements for a PC

· Network security

Precautions · Precautions for use

Major operating controls · Major operating controls and their functions

User management · User/Host management

Others · Troubleshooting

· Specifications

Operating Instructions

Refer to the Operating Instructions (PDF) in the provided CD-ROM for the following items.

Setup via recorder's main

monitor

· Basic setup

Set up date & time and language [Date/Language]

Camera setup [Camera]

Set up recording/events [REC & event]

· Advanced setup

Configure the settings relating to monitors [Monitor]

Configure the settings relating to network [Network]

Configure the settings relating to the user management [User management]

Configure the settings relating to maintenance [Maintenance]

Manage the hard disk drives [HDD management]

Configure the settings relating to the extra functions [Extra function]

· Lists of the setting items

Operation via recorder's main

monitor

· Monitor live images

Operate the camera

· Event function

· Record images

· Play recorded images

· Useful functions

Copy recorded images

Play back copied images with this recorder

Operation via PC web browser · Monitor live images

Operate the camera

· Event function

· Play recorded images

· Copy and download

Copy recorded images

Download

Play back the copied/downloaded images on a PC

· Setup

Contents (continued)

Introduction

About the user manuals

There are 4 manuals provided for the WJ-NX200K as follows.

Installation Guide (this book): Contains procedures how to install/connect this product, and descriptions of easy

conﬁgurations.

Important Information (PDF): Contains preface, precautions, and major operating controls and their functions and

speciﬁcations.

Operating Instructions (PDF): Contains descriptions of how to operate this product with a PC.

Quick Reference Guide: Contains descriptions of how to conﬁgure the basic settings and how to use the

major functions.

Adobe®Reader®is required to read the PDF files (the setup instructions and the operating instructions) on the provided CD-ROM.

When Adobe®Reader®is not installed on the PC, download the latest Adobe®Reader®from the Adobe web site and install it.

"NX200" shown in the instructions and illustrations used in these operating instructions indicate the WJ-NX200K.

Refer to "readme.txt" on the provided CD-ROM for further information about the optional dedicated software, compatible network

cameras (hereinafter, cameras) and their versions.

Refer to the Panasonic support website (https://security.panasonic.com/support) for latest information about the compatible

cameras and functions to be added or changed by firmware upgrade.

The external appearance in the document may differ from the actual product within no influence range on operation due to

improvement of the product.

CD-ROM*1.................................................................................................1 pc.

Mouse ........................................................................................................1 pc.

Installation Guide ........................................................................................1 pc.

Quick Reference Guide...............................................................................1 pc.

Activation Key Card ....................................................................................1 pc.

Terminal Plug (10 pin) .................................................................................1 pc.

Terminal Plug (11 pin) .................................................................................1 pc.

Cable Clamp ..............................................................................................2 pcs.

Dust caps for the front USBs*2...................................................................2 pcs.

Power cord.................................................................................................1 pc.

HDD ﬁxing screw........................................................................................8 pcs.

Warranty.....................................................................................................1 pc.

*1 The CD-ROM contains the operating instructions (PDFs). Make sure to read them when installing or setting the recorder.

*2 Put the dust caps for the front USBs on the front copy port and mouse connection port to prevent dust brought by fan's

intake while you are not using a mouse or an external storage device.

Standard accessories

Introduction (continued)

Number of cameras to be used in the system (9 cameras in basic system) can be increased to 16 (maximum) by purchasing the

Additional Camera Kit (WJ-NXE20, WJ-NXE20W: option). Refer to following table regarding camera numbers.

Additional Camera Kit

WJ-NXE20, WJ-NXE20W

NX200 only

(No additional license)

one Additional Camera Kit

(one additional license)

up to 9 cameras up to 16 cameras

About Additional Camera Kit (option)

This product is designed to be used indoors.

Panasonic assumes no responsibility for injuries or

property damage resulting from failures arising out of

improper installation or operation inconsistent with

this documentation.

Do not place this product in the following places:

• Locations exposed to direct sunlight

• Locations subject to having strong vibration or impact

• Locations near magnetic ﬁeld sources such as a televi-

sion or speakers

• Locations near the devices that emit large sound and

generate vibration by sound pressure

• Locations where condensation forms easily, where tem-

perature changes greatly or where humidity level is high

• Locations subject to steam and oil smoke such as a

kitchen

• Locations which are not level

• Locations subject to dust

• Locations where it may get wet from rain or water splash

Do not install this product in locations where the

product or the cables can be destroyed or damaged

by persons with malicious intent.

Precautions for installation

Registering a license of a secure communication kit (option) to the recorder enables secure communication*1with cameras. Each

secure communication kit differs in the number of cameras that can be registered as shown in the table below. Use several

licenses as necessary.

*1 Encrypted communication using an electronic certificate

WJ-NXS01, WJ-NXS01W WJ-NXS04, WJ-NXS04W WJ-NXS16, WJ-NXS16W

1 camera 4 cameras 16 cameras

About Secure Communication Kit (option)

Registering the license of the additional business intelligence kit WJ-NXF02, WJ-NXF02W (option) allows the recorder to detect

faces whose features are similar to the registered faces by comparing face images in live image with the registered face images

(face matching function). The statistical processing for the results of the face matching will also become available and it displays

the result on the main monitor connected with the recorder.

About the business intelligence function (option)

Introduction (continued)

Place this product horizontally on a level surface.

Do not place this product in an upright position. When

stacking multiple recorders, clear a space of more than 5 cm

{2 inches} from both sides, the top, the bottom and the rear

of the recorders.

More than 5 cm

{2 inches} More than 5 cm

{2 inches}

More than 5 cm

{2 inches}

More than 5 cm

{2 inches}

Heat dissipation

To prevent this product from overheating, heed the follow-

ing. Failure to observe this may cause fire or trouble.

• Do not block the cooling fan outlet or the ventilation holes

with a wall, rack, cloth, etc. Maintain the product periodi-

cally to prevent dust from blocking ventilation holes.

• The lifetime of the cooling fan is limited by use. It is rec-

ommended to replace them after around 30000 hours of

operation. Contact your dealer for replacement of the

cooling fans.

• Clear a space of more than 5 cm {2 inches} from both

sides, the top, and the rear of the product. Do not block

the ventilation holes on the front side since this product

is designed to cool the hard disk drives by drawing in air

from the front.

Avoid placing this product near noise sources

If the cables are placed near noise sources such as fluores-

cent lamps, noises may be produced. In this case, rewire

avoiding the noise sources, or move the product to a place

far from the source.

Grounding

Confirm that the wire is connected from the SIGNAL GND

terminal to earth ground.

A grounding connection must be made before connecting

the power plug or this product to the main power supply.

When disconnecting the grounding wire, make sure that the

power plug of this product is disconnected from the main

power supply.

For BNC cable connection

Use only the recommended plug below when connecting the

BNC plug to the connectors on the rear panel of this product.

Applicable plug: MIL-C39012C, MIL-C39012/16F or BS

CECC2212: 1981

* Suffixes attached to the standards may be updated.

BNC cable (locally procured)

Plug (locally procured)

Tip dimensions inside the recommended BNC plug

ø1.32 mm - ø1.37 mm

{ø0.052 inches - ø0.054 inches}

ø0.13 mm - ø0.69 mm

{ø0.005 inches - ø0.027 inches}

Important:

• A compatible plug shall be used. Failure to observe this

may cause trouble such as poor contact. At worst, the

connector of this product may be damaged.

Avoid placing receptacles that contain liquids such as

water near this product.

If liquid spills onto this product, it may cause fire or an elec-

tric shock.

About sulfuration of rubber products

Do not leave rubber products containing sulfur (packing and

rubber feet) close to the recorder or in the same storing box.

Sulfur constituent from the rubber products may cause sul-

furation corrosion on electrical parts or terminals and defects

in the recorder.

Display method of the setting screen

Click the [Setup] button.

 The top screen of the setup menu will be displayed.

Connection of a mouse

Connect the provided mouse to the mouse connection port

on the rear side of the recorder.

 The mouse cursor will be displayed on the main monitor.

Mouse operation

Left-click the desired buttons and tabs on the screen.

(Hereinafter, "Left-click..." will be described as "Click..." in

this document.)

When the entry field has the [▲] and [▼] buttons or the [▼]

button, the setting value can be changed using the mouse

wheel.

When no operation is made for 10 seconds or more, the

mouse cursor will be hidden. The mouse cursor will be dis-

played again when the mouse is moved.

This section explains operation of a mouse and the soft keyboard, and setting screen only.

The recorder can be operated using the mouse (provided) connected to the mouse connection port either on the front or the rear

side of the recorder.

It is also possible to perform settings and some operations of the recorder from the web browser. Refer to the Operating

Instructions (PDF) for descriptions of how to operate from the web browser and the configurable settings using the web browser.

Basic operations

Introduction (continued)

About the operation of on-screen keyboard

Use the on-screen keyboard to enter characters for the setting items. When clicking the [ ] icon beside the entry field, the on-

screen keyboard will be displayed, and it will become possible to enter characters by clicking the character keys on the key-

board.

On-screen keyboard screen

[Del all] button

Deletes all the characters in the entry field.

[]/[] button

Move the cursor in the entry field to either direction.

[Delete] button

Deletes a character pointed by the cursor in the entry field.

[A/a] button

This button changes the characters to be entered between

capital letters and small letters.

[Next] button

Changes the keys to be displayed for character entry.

The displayed keys are changed as follows:

Keys for the language selected by the language selec-

tion pull-down menu Combination characters 

Special characters

[Enter] button

Determines the entered characters and closes the on-screen

keyboard.

Note:

• Basic operations are also applied to the "Login" window

and registration window for license.

• Click the [×] button to close the window without deter-

mining the entered characters.

Entry field

Language selection pull-down menu

Click the [▼] button to select the language

for character entry.

Introduction (continued)

Configuration of each setting item in the setup menu should be completed in advance to use this recorder.

The setup menu has the following levels for the setting items. On "Easy Start", the minimum settings required to operate the

recorder will be performed, but other settings will remain default. On the [Basic setup] or [Advanced setup] page, the settings can

be customized in accordance with a variety of operational modes.

The following is the example of the setup menu that describes the features and operations.

The setup menu will be displayed when clicking the [Setup] button (☞page 7) at the upper right corner of the operational screen

on the main monitor.

The buttons of the setup pages will be displayed on the left column of the setup menu.

Setup menu

➀[Home] button

It is possible to return to the top screen (☞page 7) of

the setup menu from any setup page.

➁Setup menu panel

Displays buttons of the setup pages.

➂[Easy Start] button

It is possible to configure the minimum settings required

to operate the recorder, such as date & time and cam-

era registration.

➃[Basic setup] – Setup page buttons

Each "Basic setup" page will be displayed.

➄[Advanced setup] button

The buttons to open the corresponding setup pages of

the "Advanced setup" menu will be displayed. When

clicking this button again, the buttons will be hidden.

➅[Advanced setup] – Setup page buttons

Each "Advanced setup" page will be displayed.

➆Hierarchical display

The name of the current setup page will be displayed in

the hierarchy. The tab name will also be included.

➇Setup page

Displays each setup page. If the current setup page is

composed of two or more tabs, it is possible to change

the page display by clicking the tabs.

➈[Exit] button

Applies the settings to the recorder and closes the setup

menu to return to the operational screen (☞page 11).

Except for some cases, the descriptions of this document

follow the hierarchical display and setup pages.

Important:

• If the settings are applied, all login users will be forcibly

logged out.

Introduction (continued)

➀

➁

➃

➂

➄

➅

➇

➆

➈

1Obtain the license (Registration Key)

☞Page 12 and Activation Key Card

2Installation of the hard disk drive

☞Page 13

3Rack mounting

☞Page 15

4Connections

☞Page 16

5Turn on the devices

☞Page 25

6Register the license (Registration Key)

☞Page 27

Obtain the "Registration Key" of the recorder by following the

instructions on the provided Activation Key Card. To

increase the number of connected cameras, or to use the

secure function or the business intelligence function, get the

registration key of the additional license according to the

appropriate Additional Kit (option). The obtained

"Registration Key" will be used in Step 5.

Install the hard disk drives in the recorder.

Install the recorder in the rack. (☞Page 15) Go to step 4

when not installing it in the rack.

Connect the camera and monitor to this product.

Turn on the power to launch in the following order.

①Turn on the power of the camera and the monitor.

②Turn on the power of the recorder.

Important:

• Be sure to register the "Registration Key" of the recorder.

If the "Registration key" of the recorder is not registered,

the Additional Kit cannot be registered.

After registration, click [Restart] button on the license

registration screen to reboot the recorder and activate the

license.

• The main monitor is required for the settings.

* The settings can be done through a web browser on the PC (Refer to the Operating

Instructions (PDF)).

• The PC is required for reading the Important Information, the Operating Instructions

(PDF) and camera settings.

Operations ﬂow

Andere Handbücher für WJ-NX200K

Inhaltsverzeichnis

Andere Panasonic Netzwerk-Hardware Handbücher

Panasonic

Panasonic Transistors 2SA2084 Bedienungsanleitung

Panasonic

Panasonic Network Adaptor Bedienungsanleitung

Panasonic

Panasonic Zener Diodes MAZ8xxxG Series Bedienungsanleitung

Panasonic

Panasonic K-NL408KT/G Bedienungsanleitung

Panasonic

Panasonic Zener Diodes MAYS0750Y Bedienungsanleitung

Panasonic

Panasonic Transistors 2SC4562G Bedienungsanleitung

Panasonic

Panasonic Transistors 2SD1819G Bedienungsanleitung

Panasonic

Panasonic K-NL404K/G Bedienungsanleitung

Panasonic

Panasonic Chip RC Networks EZACT Benutzerhandbuch

Panasonic

Panasonic Rectifier Diodes MA6X129 Bedienungsanleitung

Panasonic

Panasonic Multi Chip Discrete UP05C8G Bedienungsanleitung

Panasonic

Panasonic RD-AA8190-01 Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA2SD31 Bedienungsanleitung

Panasonic

Panasonic Schottky Barrier Diodes MA27E02 Bedienungsanleitung

Panasonic

Panasonic Transistors 2SB1462J Bedienungsanleitung

Panasonic

Panasonic ESD Diodes MAZE062D Bedienungsanleitung

Panasonic

Panasonic WJ-NXF02 Bedienungsanleitung

Panasonic

Panasonic WJ-PB85X08 Bedienungsanleitung

Panasonic

Panasonic CZ-CFUSCC1 Bedienungsanleitung

Panasonic

Panasonic E series Bedienungsanleitung

Panasonic

Panasonic TY-FB7HM Bedienungsanleitung

Panasonic

Panasonic Circuit Protector Elements UNHZ204 Bedienungsanleitung

Panasonic

Panasonic Transistors 2SB1722G Bedienungsanleitung

Panasonic

Panasonic K-NL304K/G Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Lanner

Lanner NCA-1525 Bedienungsanleitung