Panasonic TY-WK15TA2U Bedienungsanleitung

TQBA0262-1

Combination LCD TV / DVD Player

and LCD TV

Wall Mount Kit

Installation Manual

Model No. TY-WK15TA2U

Please perform installation work correctly after carefully reading this

installation manual and the operation manual for the Combination LCD

TV / DVD Player and LCD TV.

After installation work is complete, please give this installation manual

to the customer so they can read it and keep for future reference.

(It may be needed for maintenance or when moving.)

Retain all removed parts. They may become necessary when return-

ing to the original installation condition.

Caution:This bracket intended for use only with Panasonic Combina-

tion LCD TV / DVD Player Model TC-11LV1 / TC-15LV1 / TX-15LV1

Series and LCD TV Model TC-20LA1 / TC-17LA1 / TC-14LA1 Series.

Use with other apparatus is capable of resulting in instability causing

possible injury.

Thank you very much for purchasing the wall mount kit for the Panasonic

Combination LCD TV / DVD Player and LCD TV.

Safety Precautions

To prevent injury to the user and others and to prevent damage to property, direc-

tions that must be followed are explained as shown below.

Be sure to follow

WARNING

Installation to be performed by

certified personnel only. Be aware of safety factors con-

cerning the mounting strength.

Installation

Inadequate installation may

cause the Combination LCD

TV / DVD Player and LCD TV

to fall, resulting in bodily injury.



Do not install where tolerance is weak.

If the tolerance of the mount-

ing location is weak, the

Combination LCD TV / DVD

Player and LCD TV may fall

resulting in bodily injury.

Prohibited

Insufficient strength may

cause the Combination LCD

TV / DVD Player and LCD TV

to fall, resulting in bodily injury.

Do not hang from the Combina-

tion LCD TV / DVD Player and

LCD TV, place stepsladder, etc.

the Combination LCD TV/

DVD Player and LCDTV may

become damaged or it may

fall, causing bodily injury.

Prohibited

WARNING

The following displays categorize the degree of danger when mishandled.

CAUTION

Possibility of serious injury and even death

when mishandled.



Directions that must be followed are explained using the following symbols.

(Examples of graphical symbols are shown below.)

This symbol indicates that the direction must be followed with caution.

This symbol indicates that the direction is prohibited.

This symbol indicates that the direction must always be followed.

Possibility of injury or damage to surrounding

property.

CAUTION

Installation

Do not install in humid or dusty

areas, or where the Combination

LCD TV / DVD Player and LCD TV

may be exposed to lampblack,

steam or heat.

This may affect the Combi-

nation LCD TV / DVD Player

and LCD TV, and may cause

fire or electric shock.

Do not install with the Combina-

tion LCD TV / DVD Player and

LCD TV facing downward, on its

side, or upside down.

Heat may build up within

the Combination LCD TV

/ DVD Player and LCD TV,

causing fire as a result.

Prohibited

Vent holes are located on

the rear of the Combination

LCD TV / DVD Player and

LCD TV. Blocking these

holes may result in fire.

At least two persons should per-

form installation and removal of

the Combination LCD TV / DVD

Player and LCD TV unit.

Dropping the Combination

LCD TV / DVD Player and

LCD TV may result in injury.

Ensure there is a space of at

least 5 cm between the Combi-

nation LCD TV / DVD Player and

LCD TV body and other objects

at the top, bottom and sides, and

at least 4 cm at the back.

Make sure there is sufficient air cir-

culation so that the ambient tem-

perature does not exceed 35

Heat may build up within

the Combination LCDTV/

DVD Player and LCD TV,

causing fire as a result.

Always remove the wall mount-

ing bracket when removing the

Combination LCD TV / DVD Player

and LCD TV.

Injury may result when

accidentally hitting the

projected parts.

•Take caution when removing for

repairs, etc.

Prohibited

The wall mount kit is for installing an Combination LCD TV / DVD Player and

LCD TV on a vertical wall for viewing. Do not use it for installing in any other

place than on a vertical wall.

The stand must be removed from the Combination LCD TV / DVD Player and

LCD TV before the wall mount kit may be fitted. Before starting work, be sure

to turn the power off and unplug theAC adapter power supply plug.

Install using techniques that suit the structure and materials of the installation

location.

Use commercially available M4 bolts suitable for the wall material (steel frame,

concrete etc.) as the screws for fastening to the wall.

Allow sufficient strength for safety.

The weight of the Combination LCD TV / DVD Player

and LCD TV

is approxi-

mately 3.2-5.0 kg.

When mounting on a wall, perform work so that it can withstand the weight of

the television and so that the bracket will not come loose from vibration, etc.

Reinforce the bracket if the mounting section strength is insufficient.

The television may fall if the installation is insufficient or if the screws are loose.

Check to make sure there are no electrical wires eithin the wall.

Use the supplied cable clampers to fix cables. Never fix cables using staples.

Components

Before starting installation, first check that all components have been supplied.

(ø4 ×25 mm)

Precautions for installation work

( 1 )

( 1 ) ( 3 )

( 2 )

( 4 )

(M4 ×12 mm)

Wall mounting bracketA

(main unit side)

Wall mounting bracket B

(wall side)

Angle fixing screw

(for main unit side / wall side fixing) ( 2 )

Bracket mounting screw A

(main unit side) ( 4 )

Bracket mounting screw B (for plywood)

Fall prevention string

Cable clamper

To guarantee Combination LCD TV / DVD Player and LCD TV performance

and prevent problems, do not install in locations such as the following:

About the installation location

Be sure to explain the following points to the customer:

The Combination LCD TV / DVD Player and LCD TV is best viewed directly

from the front.

Avoid areas where the florescent lighting reflects on the Combination LCD

TV / DVD Player and LCD TV surface.Although vertical angles can be ad-

justed, the mounting bracket does not move horizontally.

For the main power supply plug, use an outlet that can be easily reached by

hand. Also make sure that the television is at a height such that the power

supply switch can be easily operated, and that it is at a distance within the

remote control range (approximately 6 m from the front).

For the installation height, do not exceed the range of te connection cords

(AC adapter, antenna, etc.).

Be sure to install in a location where theAC adapter is not suspended and

where it can be placed on the floor, table, etc.

Install where there are no objects within 20 cm below the Combination LCD

TV / DVD Player and LCD TV.

Check the installation height, depth, wall structure, etc., before performing

installation work.

Near sprinklers or heat / smoke detectors

Where there is a risk of vibration or impact

Near high voltage wires or motors

Near sources of magnetism, heat, water vapor or soot

Exposed to air from heating equipment

Ensure air can flow around the Combination LCD TV / DVD Player and LCD

TV so that the temperature does not exceed 35

°C

Otherwise malfunction may occur due to the build-up of heat inside the Com-

bination LCD TV / DVD Player and LCD TV.

LCD television

(TC-11LV1)

Bracket mounting

screw A ×4 units

(M4 ×12 mm)

Wall mounting

bracket A

(main unit side)

(Example) When installing for a TC-11LV1

Fall prevention

string ×2 units

Wall mounting

bracket B

(wall side)

Bracket mounting

screw B ×4 units

(ø4 ×25 mm)

Angle fixing

screw ×2 units

(M4 ×12 mm)

Cable clamper ×3 units

Note that the centerline of the television is offset to the right or to the left from

that of the wall mounting bracket. Please exercise care during installation.

Caution

Television center

Bracket center

38.75 mm 2.5 mm

Television center Bracket center

TC-11LV1 TC-15LV1 / TX-15LV1

Sample installation layout

Installation procedure

Check the strength of the intended installation position

The weight of the Combination LCD TV / DVD Player and LCD TV installed on

the wall mounting bracket is approximately 3.2–5.0 kg.

Referring to the dimension drawing below, check the wall strength at the 4

mounting positions. If strength is insufficient, provide reinforcement.

2Mounting wall mounting bracket B

If bolts or nuts must be embedded in the wall beforehand, such as with a

concrete wall, determine the hole positions by aligning with the actual wall

mounting bracket B, or by referring to the dimension drawing, and embed

anchors of approximately 5 mm diameter.

Use commercially available M4 screws suitable for the mounting surface

material as the screws for fastening to the wall.

Using a level, determine the installation posi-

tion where the fitting is horizontal, and mark

the wall.

Fix wall mounting bracket B (wall side) using

the 4 bracket mounting screws B (plywood).

Note

164

135

5454 132

Wall mounting holes (x4)

[ Unit: mm ]

Wall mounting bracket B

At least 20 mm

3Preparation of wall mounting bracket A

Attach the fall prevention strings (2 units) from the holes on the rear of wall

mounting bracket A (main unit side).

Attach the fall prevention strings

Installation procedure (Cont'd)

Before installation, remove the AC adapter and connection cable attached to

the Combination LCD TV / DVD Player.

Fit the television correctly and securely.

For the TC-11LV1

1Remove the television stand

Remove the 4 screws.

Remove the television stand.

2 Fit wall mounting bracket A.

Align the holes in wall mounting bracket A with the screw holes in the

Combination LCD TV / DVD Player. Securely fasten the 4 bracket

attachment screws A (M4 x

12 mm).

4Preparation of television

Before installation, remove the AC adapter and connection cable attached to

the Combination LCD TV / DVD Player.

Remove the cable cover (page 8 in the television manual) and the stand cover

(page 9 in the television manual).

Fit the television correctly and securely.

For the TC-15LV1/TX-15LV1

Note:

The cable cover cannot be at-

tached. Store in a safe place in

case you need it in the future.

1Remove the television stand

Remove the 4 screws.

Remove the television stand.

2 Fit wall mounting bracket A.

Align the holes in wall mounting bracket A with the screw holes in the

Combination LCD TV / DVD Player. Securely fasten the 4 bracket

attachment screws A (M4 x

12 mm).

Fit the stand cover.

Installation procedure (Cont'd)

Inhaltsverzeichnis

Andere Panasonic Rack & Stand Handbücher

Panasonic

Panasonic ET-JPC200BK Bedienungsanleitung

Panasonic

Panasonic WV-Q169E Bedienungsanleitung

Panasonic

Panasonic PAW-GRDSTD40 Bedienungsanleitung

Panasonic

Panasonic TY-S58PX600W Bedienungsanleitung

Panasonic

Panasonic TY-WK85PV12 Bedienungsanleitung

Panasonic

Panasonic TY27SF24M Bedienungsanleitung

Panasonic

Panasonic TY-CE103PS10 Bedienungsanleitung

Panasonic

Panasonic ET-JPF200BE Bedienungsanleitung

Panasonic

Panasonic KX-TCA727EX Bedienungsanleitung

Panasonic

Panasonic TY-ST42P600W Bedienungsanleitung

Panasonic

Panasonic TY-ST85PF12 Bedienungsanleitung

Panasonic

Panasonic TY-ST65P11-K Bedienungsanleitung

Panasonic

Panasonic TY-ST42D1-WG Bedienungsanleitung

Panasonic

Panasonic TYST65R2WG - Stand For Plasma Panel Bedienungsanleitung

Panasonic

Panasonic BT-WMA26G Bedienungsanleitung

Panasonic

Panasonic TY-S37PX20W Bedienungsanleitung

Panasonic

Panasonic TC349815 Bedienungsanleitung

Panasonic

Panasonic WV-QCL500-S Bedienungsanleitung

Panasonic

Panasonic TY-ST20-K Bedienungsanleitung

Panasonic

Panasonic PT-50LC14 - 50" Rear Projection TV Bedienungsanleitung

Panasonic

Panasonic TY-ST43PE8 Bedienungsanleitung

Panasonic

Panasonic TY-ST58-K Bedienungsanleitung

Panasonic

Panasonic TY-ST42P50 Bedienungsanleitung

Panasonic

Panasonic NNTK687S Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung