Panasonic WJ-ND300 Administrator Console Handbuch

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

Network Disk Recorder

IP Quick Setup Tool

Operating Instructions

Model No. WJ-ND300

Contents

Limitation of Liability ........................................................................................................3

Disclaimer of Warranty .................................................................................................... 3

Precaution ....................................................................................................................... 3

Preface ............................................................................................................................ 4

System Configuration .................................................................................................. 4

System Requirement for a PC .................................................................................... 5

Trademarks and Registered Trademarks ................................................................... 5

Abbreviations .............................................................................................................. 5

Start/exit the software ...................................................................................................... 6

Main window ....................................................................................................................7

Icons in the tree display area ........................................................................................... 8

Operation flow .................................................................................................................9

Detect recorders/cameras and confirm the current settings ............................................ 11

Arrange the camera number by moving/deleting the camera icon .................................. 13

Move a camera icon .................................................................................................... 13

Delete a camera icon .................................................................................................. 14

Edit the settings ............................................................................................................... 16

(CAM IP Auto Addressing) .............................................................................................. 17

Tips to configure the settings .......................................................................................... 21

Troubleshooting ............................................................................................................... 22

Limitation of Liability

Precaution

THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS

FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT.

THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS.

CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS

PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).

Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export

laws of the software provided with this product, is expressively prohibited.

Disclaimer of Warranty

IN NO EVENT SHALL MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. BE LIABLE TO ANY PARTY OR ANY

PERSON,

EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES,

INCLUDING BUT NOT LIMITED TO BELOW:

(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSE-

QUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION

OF THE USER;

(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;

(4) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYS-

TEM COMBINED BY THE DEVICES OF THIRD PARTY;

(5) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHO-

TOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-

CAMERA’S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED

FOR THE PURPOSE OTHER THAN SURVEILLANCE.

Preface

By using this software, the following settings of the digital disk recorder WJ-ND300 can be configured on a PC via a

network.

• Network settings

• Registration of cameras, and deletion/edit of the registered cameras

IP addresses of the cameras connected to the WJ-ND300 can be automatically assigned with this software.

When using multiple network disk recorders, it is necessary to configure the above settings independently.

This software works only when the software version of the WJ-ND300 is 3.00 or later.

When failed to configure the above settings with this software, configure them using the setup menu of the WJ-

ND300. To configure the settings of the connected cameras, use the setup software of the cameras.

Refer to the setup instructions (PDF) of the WJ-ND300 or the operating instructions of the camera for further infor-

mation.

System Configuration

To configure the settings with this software, connect the PC in which this software is installed to the client PC port of

the WJ-ND300 and the camera to the camera port of the WJ-ND300. When the camera is connected to the client PC

port, it is impossible to detect and configure the camera.

Important:

• This software is inoperable in a different subnet over a router.

• The WJ-ND300 can be detected and configured using this software. However, for enhancing security, this soft-

ware will not detect the WJ-ND300 when 20 minutes have passed after the power is turned on once the default

settings are changed.

To detect the WJ-ND300 after the settings have been changed, click the [Available] button of "IP Setup Tool" on

the "NW Camera Setup" page (under the "Camera" page of the WJ-ND300 setup menu). Refer to the setup

instructions (PDF) of the WJ-ND300 for further information.

• Depending on the model of camera, this software will not detect it when 20 minutes have passed after the power

is turned on once the default settings are changed. Refer to the operating instructions of the camera in use for

further information.

PC in which this software is installed

Client PC port

Camera

ALARM

SUSPEND

OPERATE

ERROR TIMER REC 1-LINK/ACT-2

HDD1 HDD2 HDD3 HDD4

ESC SET

PULL

Network Disk Recorder

WJ-ND

Recorder

Network

Camera port

PUSHTOLOCK/EJECT

Detection and

configuration are

unavailable

System Requirement for a PC

This software is operable when installed on a PC that meets the following system requirements.

OS Microsoft®Windows®2000 Professional SP4

Microsoft®Windows®XP Professional SP2

Microsoft®Windows®XP Home Edition SP2

CPU Intel®Pentium®4 1.4 GHz or faster

Memory 512 MB or more

Monitor 1024 x 768 pixels or more

Network interface 100 Mbps Network interface card must be installed

Adobe®Reader Required to read these operating instructions.When the Adobe®Reader is not installed

on the PC, download the latest Adobe®Reader from the Adobe web site and install it.

Trademarks and Registered Trademarks

• Microsoft®and Windows®are registered trademarks of Microsoft Corporation in U.S. and/or other countries.

• Intel®and Pentium®are trademarks of Intel Corporation.

• Adobe®, Adobe logos, Acrobat®are registered trademarks of Adobe Systems Incorporated in the U.S. and/or

other countries.

• Other names of companies and product contained in these operating instructions may be trademarks or regis-

tered trademarks of their respective owners.

Abbreviations

The following abbreviations are used in these operating instructions.

• Microsoft®Windows®2000 Professional Service Pack 4 is described as Windows 2000.

• Microsoft®Windows®XP Professional SP2 and Microsoft®Windows®XP Home Edition SP2 are described as

Windows XP.

Start/exit the software

Start: Double-click the "IP Quick Setup Tool" icon (ND300IPsetup.exe) to start this software. The software will start

and the main window will be displayed.

Exit: Click the [Exit] button on the main window or the [x] button at the top right of the window to exit the software.

Notes:

• When using a PC on which Windows XP SP2 is installed, the security warning window may be displayed when

the IP setup tool is started. When this occurred, click the [Unblock(U)] button.

• When multiple network interface cards are installed on the PC, the network adapter selection window will be dis-

played when the software starts. Select a network adapter to be used.

Main window

Tree display area

Icons of the detected recorders and cameras will be displayed and their IP addresses and MAC addresses will be

displayed. (When failed to detect the camera, its MAC address will not be displayed.) Refer to the next page for fur-

ther information about the icons.

Network settings area

The network settings of the recorder/camera selected in the tree display area will be displayed.

[Delete] button: Click this button to delete the icon of the selected recorder/camera.

[Set] button: Click this button to determine the edited settings.

[Clear] button: Click this button to cancel the edited settings and return to the previous settings. The settings will

return to the previous settings only when the [Set] button is not clicked yet.

[CAM IP Auto Addressing] button*: Click this button to register the edited settings in the recorder. IP addresses

will automatically be assigned to the cameras connected to the recorder.

[Manual Registration] button*: Click this button to register the edited settings to the recorder/camera.

* The [CAM IP Auto Addressing] button and the [Manual Registration] button will be displayed only when the WJ-

ND300 is selected in the tree display area.

[Search] button: Click this button to search the connected recorder and the cameras connected to the recorder.

The search result will be displayed in the tree area.

[Exit] button: Click this button to exit this software.

Tree display

area

Network settings

area

Icons in the tree display area

Type

Recorder

Icon (Name) Description

Indicates the network disk recorder WJ-ND300. (Normal display)

This icon will be displayed when number of the detected cameras that are

connected to the recorder is 33 or more.

Camera

Indicates a camera whose network settings are edited with this software.

To apply the edited settings to the recorder/camera, it is necessary to

Indicates a camera whose network information is not registered in the

recorder.

It is necessary to configure the network settings and register them in the

recorder.

Indicates that the network information of this camera is conformed to the

information registered in the recorder and the camera. (Camera in normal

status)

Indicates that this camera is not applicable with this software to configure

the network settings even though the network information of this camera

is registered in the recorder. (Including cameras of other manufacturers)

Network setting configuration is unavailable with this software.

Indicates the camera whose host name is registered in the recorder,

instead of IP address.

Network setting configuration is unavailable with this software. Moving

and copying the icon of this camera is also unavailable.

Indicates a camera not detected even though its network information is

registered in the recorder.

For enhancing security, some cameras may not respond (not be detect-

ed) even though whose status is normal.

Indicates that the network information of this camera is not conformed to

the information registered in the recorder and the camera (IP address,

etc.) even though the camera is normally detected. This icon will be dis-

played when there is no available IP address for this camera or when

failed to automatically assign an IP address to this camera.

Indicates the 33rd detected camera or later.

The settings for this camera will not be applied since the recorder can

Indicates that the camera number of this camera has been changed since

this camera is deleted or moved.

It is necessary to register this camera in the recorder again. When this

camera is registered in the recorder again, it is necessary to configure the

settings since the settings such as the recording rate will return to the

default settings.

(Recorder)

(Edited)

(New)

(Camera in normal

status)

(Not applicable)

(Host name)

(Not detected)

(Incorrect settings)

(33rd or later)

(Settings changed)

Change the settings

(for the recorder and camera) (page 16)

and confirm the result.

(Manual Registration) (page 19)

and confirm the result.

(CAM IP Auto Addressing) (page 17)

Change the settings

(only for the recorder) (page 16)

Arrange the camera number by moving/

deleting the camera icon (pages 13 and 14)

Detect recorders/cameras and confirm

the current settings. (page 11)

Operation flow

The following settings can be configured with this software.

• Network settings of the recorder (Camera port, client PC port)

• Camera network settings of the recorder (Camera registration for each channel)

• Network settings of the cameras connected to the recorder (IP address, etc.)

Configure the network settings of the recorder/camera as follows.

Important:

• Any recording currently being performed on the recorder will stop in the processes of "CAM IP Auto Addressing"

and "Manual Registration".

• The model WV-NS202 accepts "Manual Registration" only.

Notes:

• When using multiple recorders, repeat the above procedures for each recorder.

• Do not change the network settings of the cameras and register the cameras with the automatically assigned IP

addresses when automatically assigning IP addresses to the cameras. (page 17)

To register the cameras

with the automatically

assigned IP addresses

(when installing newly)

To register the cameras

with the manually assigned

IP addresses

The settings for the recorder/camera will be different as follows according to how the registration is made ("CAM IP

Auto Addressing" or "Manual Registration").

*1 "CAM IP Auto Addressing" is available only when "OFF" is selected for the DHCP setting of the camera.

*2 The compression method will automatically be applied (JPEG/M-JPEG).

*3 Check if the same IP addresses are not in use already even vacant IP addresses are searched and assigned

automatically. When the message saying that no IP address is available is displayed, check the settings and per-

form "Manual Registration".

Setup item

Recorder

Camera

Camera port

Client PC port

Default gateway

HTTP port number

NW camera setup

(Manufacturer, MODEL/COM-

PRESSION, ADDRESS, Port

number)

Live image transmission rate

DHCP setting

IP address

Subnet mask

DHCP setting

IP address

Subnet mask

Edited value

Cameras will be registered for

each channel with edited

values.*2

Fixed at "1 ips"

"OFF" only *1

Edited value

Cameras will be registered for

each channel with edited

values.*2

Fixed at "1 ips"

Rate settings other than the live

image transmission rate Default setting Default setting

DHCP setting Edited value Fixed at "OFF"

IP address Edited value

Auto incremented value (+1)

starting from the IP address of

the camera port of the recorder *3

Subnet mask Edited value Same value as for the camera

port of the recorder

Gateway

HTTP port number

Edited value

Same value as for the default of

the recorder

Fixed at "80"

Manual Registration CAM IP Auto Addressing

Andere Handbücher für WJ-ND300 Administrator Console

Inhaltsverzeichnis

Andere Panasonic Aufnahmegeräte Handbücher

Panasonic

Panasonic WJHD309 - DIGITAL DISK RECORDER Bedienungsanleitung

Panasonic

Panasonic WJHD100 - DIGITAL DISC RECORDE Bedienungsanleitung

Panasonic

Panasonic AJ-HPM100E Bedienungsanleitung

Panasonic

Panasonic AGHPG10 - MEMORY CARD PORTABLE RECORDER Bedienungsanleitung

Panasonic

Panasonic SVSR100 - SD AUDIO RECORDER Bedienungsanleitung

Panasonic

Panasonic SC-HG1 Series Bedienungsanleitung

Panasonic

Panasonic WJHD100 - DIGITAL DISC RECORDE Bedienungsanleitung

Panasonic

Panasonic PN28080i-ID Bedienungsanleitung

Panasonic

Panasonic AYNE2000 - NONLINEAR AV WORKSTA Bedienungsanleitung

Panasonic

Panasonic SVSR100 - SD AUDIO RECORDER Bedienungsanleitung

Panasonic

Panasonic WJHD100 - DIGITAL DISC RECORDE Bedienungsanleitung

Panasonic

Panasonic SZ-CB8 Bedienungsanleitung

Panasonic

Panasonic RR-XS410 Bedienungsanleitung

Panasonic

Panasonic OmniVision PV-DS1000 Bedienungsanleitung

Panasonic

Panasonic CZ-CLNC1U Bedienungsanleitung

Panasonic

Panasonic AJSPD850P - P2 DECK Bedienungsanleitung

Panasonic

Panasonic AG-YA500G Bedienungsanleitung

Panasonic

Panasonic WJHD316A - DIGITAL DISK RECORDER Bedienungsanleitung

Panasonic

Panasonic AJ-DE97P Bedienungsanleitung

Panasonic

Panasonic MII AU-W35R Bedienungsanleitung

Panasonic

Panasonic SLPR300 - CD RECORDER Bedienungsanleitung

Panasonic

Panasonic CA-LSR10U - Sirius Satellite Radio Receiver Bedienungsanleitung

Panasonic

Panasonic NV-F615EG Bedienungsanleitung

Panasonic

Panasonic NV-HD610EG Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch