Panasonic KX-TD816E Bedienungsanleitung

Digital Super Hybrid System

KX-TD816E

KX-TD1232E

Added Features for

User Manual

In this manual, the last letter “E” of each model number is omitted.

Table of Contents

Additional Features

Section 2.2, Programming

Flexible Button Assignment

Night Button.................................................................................................................... 3

One-Touch Dialling with Auto Hold Button .................................................................. 4

Phantom Button .............................................................................................................. 5

Phantom Extension Bell On / Off Set.................................................................................. 6

Ringing Tone Selection for the Intercom Button................................................................. 7

Section 4.2, DPT Features

Call Forwarding — to ISDN Line....................................................................................... 8

Calling / Connected Line Identification Presentation (CLIP / COLP)................................ 11

Phantom Extension.............................................................................................................. 12

Section 6.2, SLT and ISDN Telephone Features

Call Forwarding — to ISDN Line....................................................................................... 14

Section 7, Quick Reference............................................................................................... 17

2.2 Station Programming

Flexible Button Assignment

Night Button (Assignment)

Allows you to assign a Flexible (CO, DSS) button as a Night button.

Pressing the Night button allows you to switch between the day mode and night mode.

The button indicator turns on when the night mode is assigned and turns off when the day

mode is assigned.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the desired Flexible (CO, DSS) button you wish to assign as

the Night button.

2. Dial 8.

• The display shows:

3. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Condition

• “Class of Service” programming determines the extensions that can perform this feature.

Programming References

• System Programming — Installation Manual

[513] Night Service Access

[601] Class of Service

AUTO DIAL

STORE

Night

2.2 Station Programming

One-Touch Dialling with Auto Hold Button (Assignment)

Allows you to assign a Flexible (CO, DSS, PF) button as an One-Touch Dialling with Auto

Hold button.

During a conversation, the call is put on hold and transferred to the assigned number.

You can make a call to the assigned number by pressing this button as well as pressing the

One-Touch dialling button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the desired Flexible (CO, DSS, PF) button you wish to assign

as an One-Touch Dialling with Auto Hold button.

2. Dial 8#.

3. Dial the desired number.

• Up to 16 digits can be stored.

• To erase an incorrect entry, press the CLR (S2) button or the

TRANSFER (CLEAR) button.

(The TRANSFER button becomes the CLEAR button when using the overlay.)

4. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Dial the desired number

AUTO DIAL

STORE

2.2 Station Programming

Phantom Button (Assignment)

Allows you to assign a Flexible (CO, DSS) button as the Phantom button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the desired Flexible (CO, DSS) button which you wish to

assign as the Phantom button.

2. Dial 88.

• The display shows:

3. Dial the phantom extension number.

• The display shows:

(— xxxx: phantom extension

number)

• To erase an incorrect entry, press the CLR (S2) button or the

TRANSFER (CLEAR) button.

(The TRANSFER button becomes the CLEAR button while in the programming

mode.)

4. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Conditions

• The phantom extension number must be assigned in program [130] “Phantom Extension

Number Assignment” before assigning the Phantom button.

• A DSS button can be assigned as the Phantom button so that the operator can use it for

transferring a call.

• If you assigned the Phantom button to one of the CO buttons (13 through 24) on your KX-

T7230 telephone and change the telephone to a KX-T7235 model, you must re-program the

setting as the KX-T7235 telephone has only 12 CO buttons. If you do not change the

setting, the phantom extension call reaches the INTERCOM button.

Programming References

• System Programming — Installation Manual

[130] Phantom Extension Number Assignment

AUTO DIAL

STORE

Phantom extension number

EXT-

CLR

EXT-xxxx

CLR

2.2 Station Programming

Phantom Extension Bell On / Off Set

You can select whether or not the bell will ring when a call is received at a phantom

extension.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the Phantom button.

2. Press the same Phantom button again.

3. Dial 1or 2.

– 1 : Ring off

– 2 : Ring on

4. Press the STORE button.

• The STORE indicator light turns on.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

AUTO DIAL

STORE

2.2 Station Programming

Ringing Tone Selection for Intercom Button

Allows you to assign a ringer frequency to the intercom button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1. Press the INTERCOM button which you wish to change the ringing

tone.

2. Press the same INTERCOM button again.

• The display shows the current status.

3. Enter the tone type number (1 through 8).

• The display shows the selected tone type number and you hear the

selected tone until the STORE button is pressed.

(— x: tone type number)

• If you want to change the tone type, enter another tone type

number in succession.

4. Press the STORE button.

• The STORE indicator light turns on.

• The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Condition

• The default is Ringing Tone Type 2.

Tone Type–x

AUTO DIAL

STORE

tone type number

INTERCOM

C4.2 DPT Features

Call Forwarding — to ISDN Line

The call forwarding to ISDN line feature can be assigned to each extension.

There are the following three types:

– Call Forwarding Unconditional (CFU): All incoming calls to an extension

are transferred to an ISDN line.

– Call Forwarding No Reply (CFNR): An incoming call to an extension is transferred to an

ISDN line when the extension does not answer before

a time that a telephone company assigns.

– Call Forwarding Busy (CFB): An incoming call to an extension is transferred to an ISDN

line when the extension is busy.

Standard Operation

Setting

1. Lift the handset or press the SP-PHONE button.

2. Press the FWD/DND button.

• You may dial the feature number (710) instead.

3. Dial 92, 93 or 94.

– 92 : CFU

– 93 : CFB

– 94 : CFNR

4. Dial 1.

5. Dial your multi subscriber number (MSN) and press #.

6. Dial the telephone number where the call is to be forwarded and

press #.

• You hear a confirmation tone and then a dial tone.

• The display shows the assignment (example).

TD816

✔TD1232

✔

DPT (72**)

✔35

✔50

✔

FWD/DND

Your MSN + #

telephone number + #

CFU:1234567890&

4.2 DPT Features C

7. Hang up or press the SP-PHONE button.

Cancelling (individually)

1. Lift the handset or press the SP-PHONE button.

2. Press the FWD/DND button.

• You may dial the feature number (710) instead.

3. Dial 92, 93 or 94.

– 92 : CFU

– 93 : CFB

– 94 : CFNR

4. Dial 0.

5. Dial your multi subscriber number (MSN) and press #.

• You hear a confirmation tone and then a dial tone.

• The display shows the assignment (example).

6. Hang up or press the SP-PHONE button.

FWD/DND

Your MSN + #

CFU Cancel

C4.2 DPT Features

Cancelling (all)

1. Lift the handset or press the SP-PHONE button.

2. Press the FWD/DND button.

• You may dial the feature number (710) or press the flexible

button assigned as the FWD/DND button instead.

3. Dial 90.

4. Dial your multi subscriber number (MSN) and press #.

• You hear a confirmation tone and then a dial tone.

5. Hang up or press the SP-PHONE button.

Condition

• When an error occurs, the display shows as follows:

– when an error is caused by the system

– when an error is caused by the network

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — FWD/DND Button

• System Programming — Installation Manual

[518] CFU / CFB / CFNR Assignment

FWD/DND

Your MSN + #

Not Valid

Not Accepted

Andere Handbücher für KX-TD816E

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Telefonsystem Handbücher

Panasonic

Panasonic EASA-PHONE KX-T123220 Bedienungsanleitung

Panasonic

Panasonic KX-TVA50 Handbuch

Panasonic

Panasonic KX-TS2300HGW Bedienungsanleitung

Panasonic

Panasonic KXFG2451 - B/W Thermal Transfer Bedienungsanleitung

Panasonic

Panasonic KX-TGP500 Bedienungsanleitung

Panasonic

Panasonic Easa-Phone VA-412 Bedienungsanleitung

Panasonic

Panasonic KX-T77 Series Bedienungsanleitung

Panasonic

Panasonic KX-TD816 Bedienungsanleitung

Panasonic

Panasonic KX-TVM50 Bedienungsanleitung

Panasonic

Panasonic KX-TG6700BXB Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Bedienungsanleitung

Panasonic

Panasonic KX-T3186 Bedienungsanleitung

Panasonic

Panasonic KX-FG6550 Bedienungsanleitung

Panasonic

Panasonic KX-TCA151AZV Bedienungsanleitung

Panasonic

Panasonic WX-CC2010 Series Bedienungsanleitung

Panasonic

Panasonic KX-TPA65 Bedienungsanleitung

Panasonic

Panasonic DBS 576 Bedienungsanleitung

Panasonic

Panasonic Easa-Phone KX-T3185 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Betriebsanleitung

Panasonic

Panasonic KX-TA1232 Bedienungsanleitung

Panasonic

Panasonic KX-TDA5450 Bedienungsanleitung

Panasonic

Panasonic KX-TVM50 Bedienungsanleitung

Panasonic

Panasonic KX-TSC62SXB Bedienungsanleitung

Panasonic

Panasonic NS700 Bedienungsanleitung

Beliebte Telefonsystem Handbücher anderer Marken

Teleco

Teleco Perfect Voice Tis 16 Bedienungsanleitung

AT&T

AT&T Network Adapter 25 Bedienungsanleitung

Tynetec

Tynetec Advent xt Bedienungsanleitung

Ericsson

Ericsson DCT1800-S Bedienungsanleitung

NEC

NEC Electra Elite 192 Bedienungsanleitung

Alcatel

Alcatel EASY REFLEXES 4200 Bedienungsanleitung

Bticino

Bticino PABX 28D Bedienungsanleitung

NEC

NEC SL 2100 Bedienungsanleitung

Sonifex

Sonifex Phone In 6 Bedienungsanleitung

TransTel Communications

TransTel Communications TD-824i Montageanleitung

Nortel

Nortel BCM50 Produkthandbuch

ASCOM

ASCOM TD 92375GB Betriebsanleitung

Karel

Karel MS26S Produktinformationsblatt

EnGenius

EnGenius DuraFon PRO Bedienungsanleitung

Teledat

Teledat X130 DSL Bedienungsanleitung

SpectraLink

SpectraLink MOG400 Bedienungsanleitung

LG-Nortel

LG-Nortel 300 Series Bedienungs- und Sicherheitshinweise

BlueCom

BlueCom PLTS Bedienungsanleitung