Panasonic MC-YL799-N147 Bedienungsanleitung

ing and distribution is a violation of law.

Order Number VCB01605001CE

Vacuum Cleaner

Model No.

MC-YL799-N147

MC-YL799-N149

MC-YL799-N747

Product Color : Gold

Destination : 1.UAE ------------------------YL799-N147

2.Oman Kuwait ------------YL799-N149

3.Saudi Arabia Kuwait ---YL799-N747

TABLE OF CONTENTS

PAGE PAGE

1 Specifications ----------------------------------------------------- 2

2 Location of Controls and Components ------------------- 3

3 Troubleshooting Guide ----------------------------------------- 5

4 Disassembly and Assembly Instructions ---------------- 6

4.1. Main body and the dust box separation-------------- 6

4.2. Motor removal ---------------------------------------------- 6

4.3. Air outlet cover unit removal ---------------------------- 8

4.4. Main switch (with fuse) removal ----------------------- 8

4.5. Fuse replacement ----------------------------------------- 9

4.6. Indicator pipe unit removal ------------------------------ 9

4.7. Cloth bag unit removal ----------------------------------- 9

5 Wiring Connection Diagram ---------------------------------10

6 Schematic Diagram ---------------------------------------------10

7 Exploded View and Replacement Parts List -----------12

7.1. EXPLODED VIEW (ATTACHMENTS) -------------- 12

7.2. PARTS LIST (ATTACHMENTS) ---------------------- 12

7.3. EXPLODED VIEW (BODY UNIT)-------------------- 13

7.4. PARTS LIST (BODY UNIT)---------------------------- 14

7.5. PACKING INSTRUCTIONS --------------------------- 15

7.6. PACKING LIST ------------------------------------------- 16

1 Specifications

Specifications are subject to change without notice for further improvement.

Model No. MC-YL799

Motor power 2400W

Dust capacity 21.0L

Cord Length 8.0m

Weight (With Attachments) 7.8kg

Extension Wand METAL 2

Blower Operation O

Floor Nozzle 2-Step

Attachments Crevice Tool / Upholstery Nozzle

2 Location of Controls and Components

3 Troubleshooting Guide

CONDITION CHECKPOINT METHOD OF INSPECTION CAUSE / REMEDY

Fan motor unit fails to rotate when

it is switched on

Meltdown of fuse unit • Check fuse continuity.

(Visual and conduction check)

Replace the main switch unit (with

fuse).

*Check the fan motor unit at

same time.

There may be the possibility

of a motor problem

Continuity of Cord reel partition

unit

• Check that there is conduction

between the power plug and the

plug terminal using a tester.

• Check the state of connection of

the flag terminals to the plug ter-

minals.(Check that there is no

looseness.)

Also check for the presence/

absence of protrusion and line

breakage in the lead wires and

flag terminals.

Replace the cord reel partition unit

Continuity of the main switch

unit

• Check with tester between both

terminals on the switch, while

turning switch ON/OFF.

If there is no continuity, replace the

main switch unit (with fuse).

Check of the motor connection

faston terminals

• Check if it is securely connected

by pulling on the lead wire.

Securely connect.

Continuity of the fan motor unit • Check the continuity between

both terminals (1.Blue connec-

tion of lead wire 2.Brown con-

nection of lead wire) (lead wire

connection terminal) of the fan

motor unit.

If there is not continuity, replace the

fan motor unit.

(Disconnection of the coil inside the

motor)

Wearing of the carbon brush • Visually check if one side of the

carbon brush is worn out abnor-

mally.

Replace the fan motor unit.

Suction is weak Clogging in Curved pipe unit /

Joint pipe unit / Nozzle assy /

Hose unit

• Check for clogging in each part Remove dust or replace parts

Clogging in the cloth bag unit /

Secondary filter

• Check for clogging in each part Clean

Abnormal sound Indicator pipe unit

(Air protector)

• Is it full of dust?

Clogging

Clean

Remove dust from each parts

Fan motor unit • Problem with the fan motor unit

or carbon brush

Replace the fan motor unit.

4 Disassembly and Assembly Instructions

Caution:

1. When disassembling, check the component fitting state and wirings. After repairing, always restore them to the original state.

2. Carefully handle the removed components, packing, etc. If they are damaged, then replace them with new ones.

3. After repairing, check that the components, etc., in the vicinity of the repaired sections are not damaged, the removed compo-

nents are in place, and the wirings are restored to the original state. Carry out the test run. Also check that the following

requirements are met.

• Insulation resistance

Must be 5 or more when a DC voltage of 500 V is applied across the power plug and the motor core for one second.

• Dielectric strength

Must withstand an AC voltage of 1,250 V applied across the power plug and the motor core for one minute.

4. Do not alter the model, parts, or materials during repair.

5. If a wiring unit is supplied as a repair part, replace the whole unit with the new one instead of repairing or reconnecting the

broken portions only.

6. Insert/remove the fast-on terminals by pushing/pulling them straight out without jiggling them or applying unnecessary force.

4.1. Motor housing and the lower

body unit separation

1. Remove the buckle unit, and remove the motor housing

from the lower body Assy.

4.2. Fan motor unit removal

1. Flip the motor housing, and remove the 4 screws holding

the upper body with the body cover unit, and remove the

upper body.

2. Take the fan motor unit from the body cover unit.

3. Take the cord reel partition unit out from the body cover

unit.

When mounting, align form of the motor support rub-

ber (rear) unit with form of the body cover connection

4. Mounting align the shaft of the cord reel to the rib of the

body cover unit.

(About the extra winding of the wire)

*Extra winding : 4 times

5. Remove the lead wires by shifting the noise suppressor

unit.

* Take care not to damage the noise suppressor when

shifting the noise suppressor unit.

6. Remove the noise suppressor unit, the motor support

rubber (front), and the motor support rubber (rear) unit.

7. Remove the lead wires.

* There is a tape (glass tape) wrapped on the faston

terminals, and when removing the faston terminals,

press on to the protrusion on the faston terminal

(arrow) as shown in fig.

It can be removed by pressing on the tape from

above.

* When mounting the cord reel partition unit, make

sure to wrap the faston terminals of the connected

lead wires with the glass tape.

4.3. Blower outlet unit removal

1. Remove the blower outlet unit from the body cover unit.

* Locations of parts mounted to Blower outlet unit

4.4. Main switch unit (with fuse)

removal

1. Remove the 2 screws mounting the handle.

2. Flip the body cover unit and remove the handle.

3. Remove the main switch unit and replace with the new

main switch unit.

* Main switch unit has a fuse built-in.

Also, there are tapes (glass tapes) wrapped on each

part.

4.5. Fuse replacement

* Fuse is supplied by the main switch unit (with fuse)

4.6. Indicator pipe unit removal

1. Remove the indicator pipe unit from the body upper.

4.7. Cloth bag unit removal

1. Remove the cloth bag unit from the expander.

5 Wiring Connection Diagram

6 Schematic Diagram

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Staubsauger Handbücher

Panasonic

Panasonic MCV5017 - UPRIGHT VACUUM-QKDR Bedienungsanleitung

Panasonic

Panasonic MC-UG413 Bedienungsanleitung

Panasonic

Panasonic QuickDraw MC-V7315 Bedienungsanleitung

Panasonic

Panasonic MCV7380 - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic MCV5258 - UPRIGHT VACUUMC-PLAT Bedienungsanleitung

Panasonic

Panasonic MC-UL674 Bedienungsanleitung

Panasonic

Panasonic MC-CG713A249-AE Bedienungsanleitung

Panasonic

Panasonic MC-UG323 Bedienungsanleitung

Panasonic

Panasonic MC-CG683 Bedienungsanleitung

Panasonic

Panasonic QuickDraw MC-V6945 Bedienungsanleitung

Panasonic

Panasonic MC-V9634 Bedienungsanleitung

Panasonic

Panasonic MC-V5269 Bedienungsanleitung

Panasonic

Panasonic MCV7407D - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic Quickdraw MC-V7305 Bedienungsanleitung

Panasonic

Panasonic MC-CL310 Bedienungsanleitung

Panasonic

Panasonic MCV5248 - UPRIGHT VACUUM-PLAT Bedienungsanleitung

Panasonic

Panasonic MCV5726 - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic MCGG773 - UPRIGHT VACUUM - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MCCG901 - CANISTER VACUUM - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MC-CL607 Bedienungsanleitung

Panasonic

Panasonic MCV7720 - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic Ultra-Pro MC-V200 Bedienungsanleitung

Panasonic

Panasonic MC-7650 Bedienungsanleitung

Panasonic

Panasonic MC-UG729 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch

Craftsman

Craftsman CMCVS001D1 Bedienungsanleitung