ParaBody 807 BODYSYSTEM Bedienungsanleitung

807 BODYSYSTEM

WORKOUT CENTER

CLASSH

PART # 7052601

REV. B Revision: 07/09/01

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

Version: 807107

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................5

Assembly Instructions.....6-15

General Maintenance.......16

Warranty Statement..........17

Product Services..............18

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 807 Gym System. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

NOTE:BOLTLENGTH IS MEASURED FROMTHEUNDERSIDE OFTHEHEADOFTHEBOLT.

BOLT LENGTH RULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* Adjustable wrench

* Tape measure

1 Square = 1’ X 1’

1’ 2’ 3’ 4’ 5’ 6’ 7’

1’

5’

4’

3’

2’

PARTS LIST

KEY

PART #

7058908

6407508

6111002

6406602

6407802

6407302

6407202

6024702

6406401

6406501

6125101

6194601

6654521

6654121

3102909

3102922

3102904

3102910

3102501

3102601

3102802

3102502

6236701

3102804

6412001

6020601

3105401

3109602

6145801

3103101

6416601

3104301

6405201

QTY

DESCRIPTION

UPRIGHT FRAME

BENCH FRAME

HEIGHT ADJUSTMENT BAR

WOLFF SLEEVE

BASE LEG

SADDLE

LEG EXTENSION NECK

LEG EXTENSION

HINGE TAB

U-PIN

ROLLER PAD SHAFT

ROLLER PAD

SEAT PAD

BACK PAD

3/8 X 1” BOLT

3/8 X 2-3/4” BOLT

3/8 X 3” BOLT

1/2 X 3” BOLT

3/8” WASHER

3/8” LOCK WASHER

3/8” LOCK NUT

1/2” WASHER

1-3/4” SQ. END CAP

1/2” LOW HEIGHT LOCK NUT

3/8” SPRING PIN ASSEMBLY

1/2” FLANGE BEARING

3/4” STARLOCK COLLAR

PAL NUT

THUMBSCREW

1-1/4 X 5” GRIP

PARAGLIDE STRIP (8 ct.)

3/4” SQ. RUBBER BUMPER

2” SQ. END CAP

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 1

STEP 1:

10 31

• Attach eight PARAGLIDE STRIPS (31) to the WOLFF SLEEVE (4) (FOUR ON EACH END) as shown in FIGURE 1 using the

following steps:

• Thoroughly clean all surfaces where the PARAGLIDE STRIPS are to be attached.

• Remove the PARAGLIDE STRIPS from the paper backing and firmly apply them to all shown surfaces.

• Insert one U-PIN (10) through the BUSHING of the WOLFF SLEEVE (4) and attach one PAL NUT (28) to the end of the U-PIN

(10) as shown in FIGURE 1.

• SECURELY assemble one 3/8” SPRING PIN ASSEMBLY (25) to the SPRING PIN HOUSING on the WOLFF SLEEVE (4) as

shown in FIGURE 1. (!!! IMPORTANT !!! TIGHTEN THE NUT OF THE SPRING PIN ASSEMBLY SECURELY)

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 2

STEP 2:

10 5

• Pull back the SPRING PIN on the WOLFF SLEEVE (4) and slide it over the end of the BENCH FRAME (2) as shown in

FIGURE 2. Engage the SPRING PIN into one of the adjustment holes.

• Insert two 2” SQ. END CAPS (33) into both ends of the BASE LEG (5) as shown in FIGURE 2.

• Insert one U-PIN (10) through the BUSHING on the bottom of BENCH FRAME (2) and attach one PAL NUT (28) to the end of

the U-PIN (10) as shown in FIGURE 2.

• Insert the BASE LEG (5) into the front of the BENCH FRAME (2) as shown in FIGURE 2. (MAKE SURE THAT THE TAB

ON THE BASE LEG IS UNDER THE BENCH FRAME)

TAB

FIGURE 3

STEP 3:

• Secure the WOLFF SLEEVE (4) in place with one THUMBSCREW (29).

• Insert four 2” SQ. END CAPS (33) into the BASE TUBES of the UPRIGHT FRAME (1) as shown in FIGURE 3.

• SECURELY assemble the BENCH FRAME (2) to the UPRIGHT FRAME (1) using two 3/8 X 3” BOLTS (17), one 3/8 X 2-3/

4” BOLT (16), six 3/8” WASHERS (19), and three 3/8” LOCK NUTS (21) as shown in FIGURE 3.

3/8 X 3” 17

3/8 X 2-3/4” 16

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• SECURELY assemble two 3/8” SPRING PIN ASSEMBLIES (25) to the SPRING PIN HOUSING on the UPRIGHT FRAME (1)

as shown in FIGURE 3. (NOTE: !!!IMPORTANT!!! Tighten the nut of the SPRING PIN ASSEMBLY SECURELY!)

FIGURE 4

STEP 4:

• Attach eight PARAGLIDE STRIPS (31) to both UPRIGHT TUBES on the UPRIGHT FRAME (1) (FOUR ON EACH END) as

shown in FIGURE 4 using the following steps:

• Thoroughly clean all surfaces where the PARAGLIDE STRIPS are to be attached.

• Remove the PARAGLIDE STRIPS from the paper backing and firmly apply them to all shown surfaces.

• Attach eight PARAGLIDE STRIPS (31) to each SADDLE (6) (FOUR ON EACH END) as shown in FIGURE 4.

• Slide two 1-1/4 X 5” GRIPS (30) over the DIP HANDLES of both SADDLES (6). (IF A LUBRICANT IS REQUIRED, COAT

THE INSIDE OF THE GRIP WITH RUBBING ALCOHOL.)

• Pull back the SPRING PIN on the UPRIGHT TUBES, and insert the SADDLES (6) as shown in FIGURE 4.. Slide the SADDLE

(6) down to the desired height and release the SPRING PIN into the hole.

• Secure the SADDLES (6) in place with two THUMBSCREWS (29) as shown in FIGURE 4.

• Attach two THUMBSCREWS (29) to the DIP TUBES on the UPRIGHT FRAME (1) as shown in FIGURE 4. When ready to

perform the DIP EXERCISE, simply insert the SADDLES (6) into the DIP TUBES and tighten the two THUMBSCREWS

FIGURE 5

STEP 5:

3/8 X 1” 15

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• To assemble the SEAT PAD (13) to the WOLFF SLEEVE (4), start by sliding two HINGE TABS (9) over the PIN of the

WOLFF SLEEVE (ONE ON EACH SIDE) as shown in FIGURE 5, and SECURELY assemble each HINGE TAB (9) to the

SEAT PAD (13) using two 3/8 X 1” BOLTS (15), two 3/8” LOCK WASHERS (20), and two 3/8” WASHERS (19). (MAKE

SURE BOTH HINGE TABS ARE ALL THE WAY ON THE PIN)

Andere Handbücher für 807 BODYSYSTEM

Inhaltsverzeichnis

Andere ParaBody Heim-Fitnessstudio Handbücher

ParaBody

ParaBody PBF849 Bedienungsanleitung

ParaBody

ParaBody 874 Bedienungsanleitung

ParaBody

ParaBody GS1 Bedienungsanleitung

ParaBody

ParaBody 777101 Bedienungsanleitung

ParaBody

ParaBody 808 Bedienungsanleitung

ParaBody

ParaBody 897104 Bedienungsanleitung

ParaBody

ParaBody cm3 Bedienungsanleitung

ParaBody

ParaBody GS6 Bedienungsanleitung

ParaBody

ParaBody 887 Bedienungsanleitung

ParaBody

ParaBody 894104A Bedienungsanleitung

ParaBody

ParaBody 841101 Bedienungsanleitung

ParaBody

ParaBody 828 Bedienungsanleitung

ParaBody

ParaBody 426103 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 425 Bedienungsanleitung

ParaBody

ParaBody 942101 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 400102 Bedienungsanleitung

ParaBody

ParaBody 220 Bedienungsanleitung

ParaBody

ParaBody 360101 Bedienungsanleitung

ParaBody

ParaBody 965101 Bedienungsanleitung

ParaBody

ParaBody PBF460 Bedienungsanleitung

ParaBody

ParaBody PBF351 Bedienungsanleitung

ParaBody

ParaBody 435103 Bedienungsanleitung

ParaBody

ParaBody PBF072 Bedienungsanleitung

ParaBody

ParaBody 909101 Bedienungsanleitung

Beliebte Heim-Fitnessstudio Handbücher anderer Marken

Horizon Fitness

Horizon Fitness OXFORD 6 Bedienungsanleitung

Energetics

Energetics Multi Trainer 5.1 Bedienungsanleitung

Matrix

Matrix MG-PL Series Bedienungsanleitung

Reebok

Reebok Tbr2i Bedienungs- und Wartungshandbuch

Weider

Weider 8300 Hard Drive Bedienungsanleitung

Pure Fitness

Pure Fitness 8526HE Bedienungsanleitung

Weider

Weider 8700 I Kurzanleitung

Bowflex

Bowflex Sport 001-6961 Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Kurzanleitung

Weider

Weider WEMC10161 Bedienungsanleitung

Body Solid

Body Solid GHYP-345 Bedienungsanleitung

Evo

Evo TAHOE 5105 Bedienungsanleitung

JLL

JLL Ventus Pro Air Power Bedienungsanleitung

Trojan

Trojan Colorado 370 Bedienungsanleitung

Octane Fitness

Octane Fitness xRide xR650 Bedienungsanleitung

Precor

Precor Discovery Series Bedienungsanleitung

Insportline

Insportline RW600 Bedienungsanleitung

Stamina

Stamina 55-1532 Bedienungsanleitung