Paradox Digiplex DGP2-648 Bedienungsanleitung

48-Zone LED Keypad

User Manual

DGP2-648

DGP2648_EU05.fm Page -1 Tuesday, October 15, 2002 10:10 AM

DGP2648_EU05.fm Page 0 Tuesday, October 15, 2002 10:10 AM

Digiplex/DigiplexNE LED Keypads 1n

TABLE OF CONTENTS

INTRODUCTION .........................................................3

BASIC OPERATION ...................................................4

Auditory Feedback (Beep Tones) .........................................5

Keypad Indicator Lights.........................................................5

PARTITIONED SYSTEM ............................................7

Area Display..........................................................................7

ZONES ........................................................................9

Zone Display .........................................................................9

ARMING ....................................................................10

Exit Delay Timer..................................................................10

Regular Arming ...................................................................10

Stay Arming.........................................................................11

Instant Arming.....................................................................11

Force Arming.......................................................................12

One-Touch Keys .................................................................13

Keyswitch Arming................................................................14

Auto-Arming ........................................................................14

Bypass Programming..........................................................16

DISARMING ..............................................................19

Entry Delay Timer ...............................................................19

Disarming an Armed System ..............................................19

Alarm Memory Display ........................................................21

ACCESS CODES......................................................22

System Master Code...........................................................22

User Access Codes.............................................................23

DGP2648_EU05.fm Page 1 Tuesday, October 15, 2002 10:10 AM

2 User’s Manual

Area Assignment ................................................................ 27

Erasing Access Codes........................................................ 28

Keypad Lock-Out................................................................ 28

TROUBLE DISPLAY ................................................ 29

ADDITIONAL FEATURES ....................................... 32

Programmable Outputs (PGMs) ......................................... 32

Panic Alarms....................................................................... 32

Programming Chime Zones................................................ 33

Programming the Time ....................................................... 35

QUICK FUNCTION KEYS........................................ 36

FIRE AND BURGLAR ALARMS ............................. 37

Standard Fire Zone............................................................. 37

Delayed Fire Zone .............................................................. 37

Fire Safety Tips................................................................... 39

Minimizing Home Fire Hazards........................................... 40

Burglar Alarm...................................................................... 40

TESTING AND MAINTENANCE.............................. 41

Burglar Alarm Testing......................................................... 41

Fire Alarm Testing .............................................................. 41

System Maintenance .......................................................... 41

System Test........................................................................ 42

DGP2648_EU05.fm Page 2 Tuesday, October 15, 2002 10:10 AM

Digiplex/DigiplexNE LED Keypads 3n

1.0 INTRODUCTION

Your security system uses advanced technology which will provide

you with reliable security protection and powerful features that are

easy to use.

Since you will communicate your instructions to the system through

your keypad, please read this manual carefully and have your

installer explain basic system operation.

1.1 LEGEND

= Indicates a warning.

= Indicates a note or reminder.

= Indicates useful information or tip.

[Number] =

Indicates information that must be entered on the keypad.

Action = Indicates visual feedback displayed on the keypad.

DGP2648_EU05.fm Page 3 Tuesday, October 15, 2002 10:10 AM

4 User’s Manual

2.0 BASIC OPERATION

The system communicates by illuminating the “AC” light, the “Status”

light and the various lights on the screen as shown in figure 1.

Figure 1: Keypad Overview

[Enter] Saves current data and exits current menu.

[Clear] Erases current data entry or reverts to the preceding step.

Area Lights: (A1, A2, A3 and A4)

ON = Area armed

OFF = Area disarmed

FLASH = Area in alarm

Action Lights: (Access, Stay,

Force, Mem, Trbl and Prg)

Lights will illuminate according

to the status of the system.

Numerical Lights: (Zones)

ON = Zone is open

OFF = Zone is closed (OK)

FLASHES = Zone / fire loop

“AC” Light:

ON = AC Power (OK)

OFF = Power failure

“Status” Light:

When green:

ON = All zones closed

OFF = Zone(s) open

FLASH = Exit Delay in progress

When red:

ON = All areas armed

OFF = Area disarmed

FLASH = Areas in alarm Keypad will display the status

of all its assigned areas.

DGP2648_EU05.fm Page 4 Tuesday, October 15, 2002 10:10 AM

Digiplex/DigiplexNE LED Keypads 5n

2.1 AUDITORY FEEDBACK (BEEP TONES)

When you enter information on your keypad, it will guide you with

beep tones to communicate acceptance or rejection of your entries.

Confirmation Beep: When an operation (i.e. arming/disarming) is

successfully entered or when the system switches to a new status/

menu, your keypad will emit intermittent beep tones

(“BEEP-BEEP-BEEP-BEEP-BEEP”).

Half Beep: When a step of an operation is successfully entered on

the keypad, it will emit short intermittent beep tones (“BEEP-BEEP-

BEEP”).

Rejection Beep: When reverting to a previous status, or when an

operation is incorrectly entered, your keypad will emit a continuous

beep (“BEEEEEEEEP”).

2.2 KEYPAD INDICATOR LIGHTS

For this keypad, the state of the “Status”, “AC”, and “Action” lights

(see figure 1 on page 4) represent a specific condition in your

system.

2.2.1 NORMAL MODE

If no actions are being performed on your keypad, it will remain in

Normal Mode. In Normal Mode the keypad will illuminate:

• The “AC” light if power is present.

• The numerical lights representing any open or tampered zones.

• The area lights if any areas are armed.

• The MEM action light if any alarms have occurred.

• The TRBL action light if any troubles are occurring.

DGP2648_EU05.fm Page 5 Tuesday, October 15, 2002 10:10 AM

6 User’s Manual

2.2.2 CONFIDENTIAL MODE

The installer can program your keypad not to display the status of

your system by changing the keypad from Normal Mode to

Confidential Mode. This occurs when your keypad has been inactive

for a period of time defined by your installer. In Confidential Mode all

the indicator lights will turn off. Depending on how your keypad was

programmed by your installer, you must either press a key or enter

your User Access Code to activate Normal Mode.

2.2.3 MULTIPLE-ACTION

If your installer has enabled this feature, your keypad will permit you

to complete more than one action without having to reenter your User

Access Code. Press the [Clear] key to exit the User Menu.

2.2.4 ILLUMINATION

You can adjust the illumination behind the keys to suit your

needs.

How do I adjust the illumination level?

1) Enter your [Access Code]. Your keypad will emit a Confirmation

Beep. The ACCESS action light will flash.

2) Press the [6] key. Your keypad will emit a Confirmation Beep, the

Prg action light will illuminate and the numerical light for the

current setting will illuminate.

3) Use the [U]and [V] keys to increase or decrease the

illumination. The range is between numerical light 1 to 8 (1 being

the lowest and 8, the brightest).

4) Press the [Enter] key to save and exit.

DGP2648_EU05.fm Page 6 Tuesday, October 15, 2002 10:10 AM

Digiplex/DigiplexNE LED Keypads 7n

3.0 PARTITIONED SYSTEM

Your installer can set your keypad to recognize separate protected

areas. A separated system is called a partitioned system, which can

be useful in situations where shared security systems are more

practical. For example, a company that has both an office and a

warehouse area, can arm and disarm each area separately while

controlling access to each area. Therefore, one person may have

access to only one area, whereas another person may have access

to all areas. Access to the areas is determined by the User Access

Code.

3.1 AREA DISPLAY

The Area Status Display enables you to see the status of the

individual areas within a partitioned system (see section 3.0).

Depending upon which system you have, your installer can partition

the system into separate areas. Your keypad can be programmed to

display up to four areas. These areas are indicated as area lights A1

to A4.

How do I see the status of the areas?

1) Enter your [Access Code].

2) Press the key corresponding to the area you want to view. Open

zones assigned to the area will illuminate and display their status

(figure 1 on page 4).

3) Press the [Clear] key to exit.

DGP2648_EU05.fm Page 7 Tuesday, October 15, 2002 10:10 AM

8 User’s Manual

Your keypad will emit a Confirmation Beep and remain in

that area’s status for two minutes then return to Normal or

Confidential Mode. You can perform the next desired action

from Area Status Display.

In Area Status Display, the following will illuminate for the area

selected:

• The area lights (A1, A2, A3, and A4) if the associated area is

armed. For example, if you have selected area 3 and it is currently

armed, A3 will illuminate.

• The numerical light(s) representing any open zone(s) in a

corresponding area or areas.

• The MEM action light if any alarms have occurred.

• The TRBL action light if any troubles are occurring.

• The STAY action light if the area is Stay or Instant Armed.

• The FORCE action light if the area is Force Armed.

• The BYP action light if zones are bypassed.

DGP2648_EU05.fm Page 8 Tuesday, October 15, 2002 10:10 AM

Andere Handbücher für Digiplex DGP2-648

Inhaltsverzeichnis

Andere Paradox Tastenfeld Handbücher

Paradox

Paradox 1686V Bedienungsanleitung

Paradox

Paradox 1686V Bedienungsanleitung

Paradox

Paradox Digiplex EVO DGP2-641BL Bedienungsanleitung

Paradox

Paradox K32+ Bedienungsanleitung

Paradox

Paradox TM50 Touch Bedienungsanleitung

Paradox

Paradox TM50 Touch Bedienungsanleitung

Paradox

Paradox Esprit+ 642 Montageanleitung

Paradox

Paradox Spectra 1641BL Bedienungsanleitung

Paradox

Paradox Paradox Digiplex DGP-610 Bedienungsanleitung

Paradox

Paradox DGP2-641 Benutzerhandbuch

Paradox

Paradox Esprit+ 642 Bedienungsanleitung

Paradox

Paradox Magellan MG32LRF Service-Handbuch

Paradox

Paradox 1640 Bedienungsanleitung

Paradox

Paradox Spectra 1689 Bedienungsanleitung

Paradox

Paradox Imperial Digiplex Evo R915 Bedienungsanleitung

Paradox

Paradox TM40 Bedienungsanleitung

Paradox

Paradox Spectra 1689 Bedienungsanleitung

Paradox

Paradox Spectra 1641BL Bedienungsanleitung

Paradox

Paradox Spectra 1689 Bedienungsanleitung

Paradox

Paradox Spectra 1689 Bedienungsanleitung

Paradox

Paradox K32LCD+ Bedienungsanleitung

Paradox

Paradox Esprit 639 Bedienungsanleitung

Paradox

Paradox Magellan K636 Bedienungsanleitung

Paradox

Paradox Digiplex DGP2-648 Montageanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung