Paradox K641+ Bedienungsanleitung

Printed in Canada | 10/2014 K641+ Install Guide

Compatibility

The K641+ is compatible with EVO192 and EVOHD. Please refer to the Technical

Specifications section for more details.

Technical Specifications

Warranty

Warranty: For complete warranty information on this product, please refer to the Limited Warranty Statement

found on the Web site www.paradox.com/terms. Your use of the Paradox product signifies your acceptance of all

warranty terms and conditions.

www.paradox.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

K641+ Keypad

Quick Install Guide

The K641+ keypad allows you to configure your Paradox system through its

interface.

Installation

1. Using a flathead screwdriver, pry the front housing assembly from the

backplate.

Figure 1: Opening the K641+

Operating Voltage 9 to 16Vdc

Operating Temp. -10 to 55°C (14 to 131°F)

Power Consumption Maximum current - 150mA

Dimensions 15 x 12.6 x 2.7 cm (6 x 4.9 x 1.06 in.)

Weight 230g (8.1 oz)

Humidity 5-93%

Compatibility EVO192 v2.16 or higher and EVOHD V1.0 or higher

Compliance EN50131-3 Grade 3; Environmental Class II

K641+-EI01

2. If using surface mounted cabling, you will need to knock out the plastic tab #1

at the top or bottom of the K641+ backplate in order to for the cable to pass

through, refer to figure 3.

3. Insert needle nose pliers into the appropriate plastic tab and carefully break off.

Figure 2: Surface-mount cabling plastic tab removal

4. Mount the backplate to the wall by securing a M3.5 (#6) screw in each of the

dedicated mounting holes and tamper hole while ensuring that the top is up, as

shown in figure 3. For EN installations, use the designated mounting holes (#2).

Figure 3: K641+ Backplate

5. Connect the 4-wire combus wires to the connector bus, as shown.

Figure 4: Wiring

6. Assemble both items by joining the hooks on the backplate to their respected

slots on the front housing assembly.

7. Secure the front housing to the backplate by snapping it into place.

The installation process is now complete.

Configuration

Modules can be configured using this keypad or BabyWare. The preferred option is

to use BabyWare to configure the system.

To configure modules through the keypad

1. Press and hold the 0 (number zero) key.

NOTE: The area must be disarmed to configure modules.

2. Initially you will see User Access Code but within 2 seconds it will change to

Installer Code.

3. When the Installer code appears, input the Installer code number, the default

number is [000000].

4. Input the 4 digit section code for Module Programming [4003].

NOTE: You need module serial numbers for programming.

5. Input the module serial number.

6. Input module section [001].

7. Now you can start module programming.

Cable pass-through

2 2

Wall Tamper

Plastic tab

EN mounting holes

Mounting holes

Note:

ZX1 is a Programmable input

PGM is a Programmable output

All Disarmed

2014/19/05 16:00

User Access Code

[* _ ]

Installers Code

[ _ ]

Inhaltsverzeichnis

Andere Paradox Tastenfeld Handbücher

Paradox

Paradox Esprit+ 642 Montageanleitung

Paradox

Paradox Esprit 639 Bedienungsanleitung

Paradox

Paradox Grafica Bedienungsanleitung

Paradox

Paradox Esprit 636 Bedienungsanleitung

Paradox

Paradox TM50 Touch Bedienungsanleitung

Paradox

Paradox TM50 Touch Bedienungsanleitung

Paradox

Paradox Digiplex DGP-641 Bedienungsanleitung

Paradox

Paradox Grafica Bedienungsanleitung

Paradox

Paradox Grafica DNE-K07 Betriebsanleitung

Paradox

Paradox Digiplex DGP2-648 Bedienungsanleitung

Paradox

Paradox IMPERIAL V32 Bedienungsanleitung

Paradox

Paradox Digiplex Bedienungsanleitung

Paradox

Paradox Spectra 1641BL Bedienungsanleitung

Paradox

Paradox Imperial Digiplex Evo R915 Bedienungsanleitung

Paradox

Paradox 1686V Bedienungsanleitung

Paradox

Paradox TM50 Touch Bedienungsanleitung

Paradox

Paradox Spectra 1641 Montageanleitung

Paradox

Paradox TM50 Touch Bedienungsanleitung

Paradox

Paradox TM40 Bedienungsanleitung

Paradox

Paradox SP5500 Bedienungsanleitung

Paradox

Paradox Magellan MG32LRF Service-Handbuch

Paradox

Paradox Spectra 1689 Bedienungsanleitung

Paradox

Paradox Esprit+ 642 Bedienungsanleitung

Paradox

Paradox K32+ Bedienungsanleitung

Beliebte Tastenfeld Handbücher anderer Marken

BFT

BFT SELETTO Bedienungsanleitung

Micro Id

Micro Id MP7G3BL Gebrauchsanweisung

WindowMaster

WindowMaster WLI 130 Bedienungsanleitung

ACT

ACT ACT PRO 1030 Bedienungsanleitung

Cardin

Cardin SSB Series Bedienungsanleitung

Harman Kardon

Harman Kardon KP 1 Bedienungsanleitung

Chamberlain

Chamberlain KPR2000 Benutzerhandbuch

CYP

CYP CR-KP1 Bedienungsanleitung

Aeware

Aeware k-35 Series Referenzhandbuch

Aritech

Aritech CS-175 Series Bedienungsanleitung

GE NetworX NX-1600E Series Bedienungsanleitung

Lenze AC Tech

Lenze AC Tech MC SERIES Bedienungsanleitung

Burg Wächter

Burg Wächter secuENTRY 7711 Bedienungsanleitung

Aeware

Aeware in.k450 Bedienungsanleitung

Lenze

Lenze EPM-H410 Bedienungsanleitung

Toshiba

Toshiba RKP007Z Bedienungsanleitung

Gemini

Gemini GEM-DXK1 KEYPAD Bedienungsanleitung

Russound

Russound MDK-C5 Betriebsanleitung