Paradyne 4300 Bedienungsanleitung
4300-A2-GZ40-00 July 2004 1
4300 Remote Broadband Access Concentrator
Installation Instructions
Document Number 4300-A2-GZ40-00
July 2004
Contents
CONTENTS.................................................................................................................................................................................. 1
USING THIS INSTALLATION GUIDE ................................................................................................................................... 2
PRODUCT DOCUMENTATION ONLINE.............................................................................................................................. 2
INSPECTING SHIPMENT......................................................................................................................................................... 3
WARRANTY, SALES, SERVICE, AND TRAINING INFORMATION ............................................................................... 3
PRODUCT OVERVIEW............................................................................................................................................................. 3
CABINET CONFIGURATIONS............................................................................................................................................... 5
EXPANSION, MOUNTING AND MAINTENANCE KITS .................................................................................................... 6
PRODUCT SPECIFICATIONS................................................................................................................................................. 7
QUARTER-TURN LOCKING DOOR LATCHES ................................................................................................................... 8
INSTALLATION PROCEDURE ............................................................................................................................................... 9
CLEARANCE REQUIREMENTS ............................................................................................................................................ 9
INSTALLATION PROCEDURE FOR POLE MOUNTING .................................................................................................. 10
INSTALLATION PROCEDURE FOR WALL MOUNTING................................................................................................. 12
CABINET GROUNDING INFORMATION ........................................................................................................................... 14
GROUND WIRE...................................................................................................................................................................... 14
GROUNDING DIAGRAM AND PROCEDURE.................................................................................................................... 15
PROTECTION/CROSS CONNECTS...................................................................................................................................... 16
PROTECTION/CROSS CONNECT WIRING TABLES ...................................................................................................... 17
FAN/FILTER REPLACEMENT.............................................................................................................................................. 19
FILTER MAINTENANCE .............................................................................................................................................................. 19
EXTERNAL WIRING............................................................................................................................................................... 20
LINE POWER ............................................................................................................................................................................ 20
SCHEMATIC WIRING DIAGRAMS ..................................................................................................................................... 20
4300 Remote Broadband Access Concentrator Installation Instructions
Using This Installation Guide
This publication provides a description of the 4300 Remote Broadband Access Concentrator (BAC). Typical
applications, mechanical descriptions, installation instructions, safety guidelines, grounding instructions, and wiring
diagrams are included.
Two types of messages appear throughout this manual, identified by the following icons:
Note - indicates special conditions.
Caution - indicates possibility of personal injury or equipment damage.
Product Documentation Online
Complete documentation for this product is available at www.paradyne.com. Select Support →Technical
Manuals.
Select the following documents:
2600-A2-GB21
GranDSLAM 4200 IP DSLAM Command Line Interface Reference
2600-A2-GB22
GranDSLAM 4200 IP DSLAM SNMP Reference
2600-A2-GT20
GranDSLAM 4200 IP DSLAM Training Guide
4200-A2-GB20
GranDSLAM 4200 ATM DSLAM User's Guide
4200-A2-GN20
GranDSLAM 4200 ATM DSLAM Installation Guide
4200-A2-GN21
GranDSLAM 4200 IP DSLAM Installation Guide
4300-A2-GZ41-00
Field Upgrade Kit for the 4300 Remote BAC, Feature Number 4300-F1-100, Installation Instructions
4300-A2-GZ42-00
Pole Mounting Kit for the 4300 Remote BAC, Feature Number 4300-F1-400, Installation Instructions
4300-A2-GZ43-00
Wall Mounting Kit for the 4300 Remote BAC, Feature Number 4300-F1-401, Installation Instructions
4300-A2-GZ44-00
Fan Replacement Kit for the 4300 Remote BAC, Feature Number 4300-F1-500, Installation Instructions
4300-A2-GZ45-00
Filter Replacement Kit for the 4300 Remote BAC, Feature Number 4300-F1-501, Installation Instructions
To order a paper copy of a Paradyne document, or to speak with a sales representative, please call 727-530-2000.
2 July 2004 4300-A2-GZ40-00
4300 Remote Broadband Access Concentrator Installation Instructions
Inspecting Shipment
On receipt of the equipment, inspect the shipping container(s) and note any signs of damage. Then unpack the
container(s) and carefully inspect for damage to the contents. If the equipment has been damaged in transit,
immediately report the extent of damage to the transportation company and your sales representative.
Warranty, Sales, Service, and Training Information
Contact your local sales representative, service representative, or distributor directly for any help needed. For
additional information concerning warranty, sales, service, repair, installation, documentation, training, distributor
locations, or Paradyne worldwide office locations, use one of the following methods:
• Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure to register your warranty
at www.paradyne.com/warranty.)
• Telephone: Call our automated system to receive current information by fax or to speak with a company
representative.
– Within the U.S.A., call 1-800-870-2221
– Outside the U.S.A., call 1-727-530-2340
Trademarks
GranDSLAM is a registered trademark of Paradyne Corporation. All other products and services mentioned herein
are the trademarks, service marks, registered trademarks, or registered service marks of their respective owners.
Product Overview
The 4300 Remote BAC is a pole-mounted or wall-mounted outdoor telecommunications equipment cabinet. The
cabinet has overall dimensions of 26 inches high x 19 inches deep x 22 inches wide. See the figures on the
following pages for details.
The cabinet is constructed of aluminum with a powder coat painted finish for reduced weight and superior corrosion
resistance. The front door is equipped with a quarter turn padlockable door latch. The top of the cabinet has a
double wall construction to reduce the effects of solar radiation and for structural integrity.
Cooling is provided by a –48 VDC fan ventilation system. The fan is mounted to the roof of the cabinet behind the
equipment. The fan pulls air through the front door of the cabinet and exhausts the air through the roof overhang
and the louvers in the sides of the roof.
The left front of the equipment-mounting bay has 6U (10.5 inches) of 19" rack space provided for mounting up to
three GranDSLAM 4200 assemblies (1U each) and a rectifier or a DC-DC converter (2U each). An additional 1U is
provided for future expansion. Two swing-out 19” racks are provided on the right side of the equipment bay for
mounting up to four 50 pair protection/cross connect assemblies (200 pair capacity). Each protection/cross connect
swing-out rack has 4U of 19” rack space (8U total).
Cable entry and exit from the cabinet passes through two sealing boots located in the bottom rear of the equipment
bay. The master grounding bus bar is located on the rear wall of the equipment bay on the left side. AC and DC
power centers are mounted to the rear wall on the right side.
4300-A2-GZ40-00 July 2004 3
4300 Remote Broadband Access Concentrator Installation Instructions
Cabinet lifting eyelets
Rectifier or DC-DC
Converter
GranDSLAM 4200
DSLAMs
Protection/Cross
Connect Panels
Swing out racks for
Protection/Cross
Connect Panels
Figure A - Front view of cabinet with door open
4 July 2004 4300-A2-GZ40-00
4300 Remote Broadband Access Concentrator Installation Instructions
Ground Bus Bar
AC Input Panel for Model 2
DC Input Panel for Model 3
Air Filters
Cable Entry Ports
Cable Management
Brackets
DC Distribution Box
Figure B - Front view of cabinet without equipment
CABINET CONFIGURATIONS
Three basic cabinet configurations are offered as explained below. Expansion kits are provided to increase the capacity
of each configuration to up to three GranDSLAM 4200 DSLAMs. Kits are also provided for fan and filter replacement and
for pole or wall mounting brackets.
Model numbers are of the form 43WX-P1-Y0Z, where:
• Wis the DSL type (1 for ReachDSL, 2 for ADSL, 3 for ADSL Annex B, 7 for SHDSL)
• Xis the uplink type (1 for T1 ATM, 2 for E1 ATM, 3 for 8-port T1/E1 IMA, 9 for 10/100/1000BaseT/GigE fiber)
• Yis the power type (1 for externally-fed –48/–60 VDC, 2 for AC, 3 for line power)
• Zis the splitter option (0 for 900 ohm, 1 for 600 ohm)
The three basic cabinet configurations are:
Model 1 (Feature Number 43xx-P1-10x) - Cabinet to be used at existing remote terminal sites, where the RT can
supply –48 VDC power. This model will be wired for one GranDSLAM assembly.
Model 2 (Feature Number 43xx-P1-20x) – Cabinet to be used where AC power is available. This model will be
wired for one GranDSLAM assembly and will include an AC load center and a –48 VDC rectifier.
Model 3 (Feature Number 43xx-P1-30x) – Cabinet to be used where AC power is not available. Power to the cabinet
will be provided by up to 25 common pairs. The tips and rings of the pairs are bussed together and fed to a DC-DC
converter, which provides the –48 VDC power to the GranDSLAM assemblies. The input voltage to the DC-DC converter
is 90 to 400 VDC. This model will be wired for one GranDSLAM assembly.
4300-A2-GZ40-00 July 2004 5
4300 Remote Broadband Access Concentrator Installation Instructions
EXPANSION, MOUNTING AND MAINTENANCE KITS
See Table 1 for expansion kit part numbers. The Ordering Procedure section of this document contains instructions
for ordering the kits.
Table 1 - Expansion, Mounting and Maintenance Kits
Feature Number Description
4300-F1-100
Field upgrade for adding one protected GranDSLAM assembly to Model 1, 2 or
3. Includes one 50 pair protection/100 pair cross connect block and associated
cabling.
4300-F1-400
Pole mounting kit. Includes mounting brackets and hardware for pole mounting
the cabinet.
4300-F1-401
Wall mounting kit. Includes mounting brackets and hardware for wall mounting
the cabinet.
4300-F1-500 Fan field replacement kit. Includes one –48 VDC fan assembly.
4300-F1-501 Filter field replacement kit. Includes the filters required for one cabinet.
6 July 2004 4300-A2-GZ40-00
4300 Remote Broadband Access Concentrator Installation Instructions
PRODUCT SPECIFICATIONS
Cabinet outer physical dimensions:
Height – 26 inches (66 cm)
Width – 22 inches (56 cm) — does not include heat exchanger
Depth – 19 inches (48 cm) internal
Approx. Weight – 60 pounds (27 kg)
Top View
Front View Side View
Figure C – Cabinet overall dimensions
4300-A2-GZ40-00 July 2004 7
4300 Remote Broadband Access Concentrator Installation Instructions
QUARTER-TURN LOCKING DOOR LATCHES
The cabinet door is equipped with 2 quarter-turn padlockable latches. The latches are secured by turning the 7/16” hex
security bolt one quarter turn clockwise until the stop is reached. Convenient security locking hasps are factory installed
to allow for a #1 Master Lock padlock (or equivalent) to be installed. With a padlock on the latch, the door cannot be
opened, deterring vandalism.
Figure D – Quarter turn locking door latches
8 July 2004 4300-A2-GZ40-00
4300 Remote Broadband Access Concentrator Installation Instructions
Installation Procedure
The 4300 Remote BAC can be mounted on a pole or wall. See figures below.
Lifting eyelets are provided to facilitate hoisting if desired.
During cabinet mounting, fix the cabinet securely to avoid personal injury or cabinet damage.
CLEARANCE REQUIREMENTS
When selecting a location to mount the cabinet, ensure that proper clearance is available to allow adequate
ventilation and to allow the cabinet door to open fully. See figure E below for the top view of the cabinet footprint.
Figure E - Cabinet Footprint
4300-A2-GZ40-00 July 2004 9
4300 Remote Broadband Access Concentrator Installation Instructions
INSTALLATION PROCEDURE FOR POLE MOUNTING
Use this procedure to mount the cabinet on a 6-inch to 8-inch diameter pole. See Figure F below for a cabinet
mounting illustration.
Figure F - Pole Mounting Diagram
10 July 2004 4300-A2-GZ40-00
Inhaltsverzeichnis
Andere Paradyne Netzwerk-Hardware Handbücher
Paradyne
Paradyne Hotwire 5446 Bedienungsanleitung
Paradyne
Paradyne COMSPHERE 6700 Series Bedienungsanleitung
Paradyne
Paradyne 9126 Bedienungsanleitung
Paradyne
Paradyne COMSPHERE 3800 Series Bedienungsanleitung
Paradyne
Paradyne COMSPHERE 3610 Bedienungs- und Wartungshandbuch
Paradyne
Paradyne 4929 DSLAM Bedienungsanleitung
Paradyne
Paradyne MIM-10/100 Bedienungsanleitung
Paradyne
Paradyne Hotwire 8779 Bedienungsanleitung
Paradyne
Paradyne Hotwire 5216 Bedienungsanleitung
Paradyne
Paradyne Comsphere 3510 Bedienungsanleitung
Paradyne
Paradyne ACCULINK 317x E1 Handbuch
Paradyne
Paradyne MIM-2T1 Bedienungsanleitung
Paradyne
Paradyne BitStorm 4800 Express Bedienungsanleitung
Paradyne
Paradyne Jetstream CPX-1000 Bedienungsanleitung
Paradyne
Paradyne 3160-A3 Handbuch
Paradyne
Paradyne COMSPHERE 3610 Bedienungsanleitung
Paradyne
Paradyne 7915-A1 E1 SDSL Bedienungsanleitung
Paradyne
Paradyne 7112 Bedienungsanleitung
Paradyne
Paradyne COMSPHERE 3610 Bedienungsanleitung
Paradyne
Paradyne ACCULINK 3151 CSU Bedienungsanleitung
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
