Parker Ac890 Bedienungsanleitung

AC890

Frame K

HA500572 Issue 11 Compatible with Software Version 3.12 onwards

Product Manual

aerospace

climate control

electromechanical

ﬁltration

ﬂuid & gas handling

hydraulics

pneumatics

process control

sealing & shielding

ENGINEERING YOUR SUCCESS.

AC890 Engineering Reference

Product Manual : Frame K

Chapter 1 Issue 11

Compatible with Software Version 3.12

2013 Parker Hannifin Manufacturing Limited.

All rights strictly reserved. No part of this document may be stored in a retrieval system, or transmitted in

any form or by any means to persons not employed by a Parker Hannifin Manufacturing Limited company

without written permission from Parker Hannifin Manufacturing Ltd. Although every effort has been taken

to ensure the accuracy of this document it may be necessary, without notice, to make amendments or correct

omissions. Parker Hannifin Manufacturing Limited cannot accept responsibility for damage, injury, or

expenses resulting therefrom.

WARRANTY

The general terms and conditions of sale of goods and/or services of Parker Hannifin Europe Sarl,

Luxembourg, Switzerland branch, Etoy, apply to this product unless otherwise agreed. The terms and

conditions are available on our website www.parker.com/termsandconditions/switzerland

Parker Hannifin Manufacturing Limited reserves the right to change the content and product specification

without notice.

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED

ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other information from Parker-Hannifin Corporation, its subsidiaries and

authorized distributors provide product or system options for further investigation by users having

technical expertise.

The user, through its own analysis and testing, is solely responsible for making the final selection

of the system and components and assuring that all performance, endurance, maintenance, safety

and warning requirements of the application are met. The user must analyze all aspects of the

application, follow applicable industry standards, and follow the information concerning the

product in the current product catalogue and in any other materials provided from Parker

Hannifin Corporation or its subsidiaries or authorized distributors.

To the extent that Parker Hannifin Corporation or its subsidiaries or authorized distributors provide

component or system options based upon data or specifications provided by the user, the user is

responsible for determining that such data and specifications are suitable and sufficient for all

applications and reasonably foreseeable uses of the components or systems.

The above disclaimer is being specifically brought to the user’s attention and is in addition to and

not in substitution to the Exclusions and Limitations on Liability which are set out in the terms and

conditions of sale.

Chapter1 Safety

Please read these important Safety notes before installing and operating this equipment.

Caution

CAUTION notes in the manual warn of danger

to equipment.

WARNING

WARNING notes in the manual warn of

danger to personnel.

Requirements

IMPORTANT Please read this information BEFORE installing the equipment.

Intended Users

This manual is to be made available to all persons who are required to install, configure or service

equipment described herein, or any other associated operation.

The information given is intended to highlight safety issues, and to enable the user to obtain maximum

benefit from the equipment.

Complete the following table for future reference detailing how the unit is to be installed and used.

INSTALLATION DETAILS

Model Number

(see product label)

Where installed

(for your own information)

Unit used as a:

(refer to Certification)

Component Relevant Apparatus

Unit fitted:

Wall-mounted Enclosure

Application Area

The equipment described is intended for industrial motor speed control utilising AC induction or AC

synchronous machines.

Personnel

Installation, operation and maintenance of the equipment should be carried out by qualified personnel. A

qualified person is someone who is technically competent and familiar with all safety information and

established safety practices; with the installation process, operation and maintenance of this equipment; and

with all the hazards involved.

Product Warnings

Caution

Risk of electric shock

Caution

Refer to documentation

Earth/Ground

Protective Conductor

Terminal

Hazards

DANGER! - Ignoring the following may result in injury

1. This equipment can endanger life by exposure to

rotating machinery and high voltages.

2. The equipment must be permanently earthed due to

the high earth leakage current, and the drive motor

must be connected to an appropriate safety earth.

3. Ensure all incoming supplies are isolated before

working on the equipment. Be aware that there may

be more than one supply connection to the drive.

4. There may still be dangerous voltages present at

power terminals (motor output, supply input phases,

DC bus and the brake, where fitted) when the motor is

at standstill or is stopped.

5. For measurements use only a meter to IEC 61010 (CAT III or

higher). Always begin using the highest range.

CAT I and CAT II meters must not be used on this product.

6. Allow at least 5 minutes for the drive's capacitors to discharge

to safe voltage levels (<50V). Use the specified meter capable

of measuring up to 1000V dc & ac rms to confirm that less

than 50V is present between all power terminals and between

power terminals and earth.

7. Unless otherwise stated, this product must NOT be dismantled.

In the event of a fault the drive must be returned. Refer to

"Routine Maintenance and Repair".

WARNING! - Ignoring the following may result in injury or damage to equipment

SAFETY

Where there is conflict between EMC and Safety requirements, personnel safety shall always take precedence.

Never perform high voltage resistance checks on the

wiring without first disconnecting the drive from the

circuit being tested.

Whilst ensuring ventilation is sufficient, provide guarding

and /or additional safety systems to prevent injury or

damage to equipment.

When replacing a drive in an application and before

returning to use, it is essential that all user defined

parameters for the product’s operation are correctly

installed.

All control and signal terminals are SELV, i.e. protected

by double insulation. Ensure all external wiring is rated

for the highest system voltage.

Thermal sensors contained within the motor must have at

least basic insulation.

All exposed metalwork in the Inverter is protected by

basic insulation and bonded to a safety earth.

RCDs are not recommended for use with this product but,

where their use is mandatory, only Type B RCDs should

be used.

EMC

In a domestic environment this product may cause radio

interference in which case supplementary mitigation

measures may be required.

This equipment contains electrostatic discharge (ESD)

sensitive parts. Observe static control precautions when

handling, installing and servicing this product.

This is a product of the restricted sales distribution class

according to IEC 61800-3. It is designated as

“professional equipment” as defined in EN61000-3-2.

Permission of the supply authority shall be obtained

before connection to the low voltage supply.

CAUTION!

APPLICATION RISK

The specifications, processes and circuitry described herein are for guidance only and may need to be adapted to the

user’s specific application. We can not guarantee the suitability of the equipment described in this Manual for individual

applications.

RISK ASSESSMENT

Under fault conditions, power loss or unintended operating conditions, the drive may not operate as intended. In particular:

Stored energy might not discharge to safe levels as

quickly as suggested, and can still be present even

though the drive appears to be switched off

The motor's direction of rotation might not be controlled

The motor speed might not be controlled

The motor might be energised

A drive is a component within a drive system that may influence its operation or effects under a fault condition.

Consideration must be given to:

Stored energy

Supply disconnects

Sequencing logic

Unintended operation

Getting Started

Page 2-1 890SD Standalone Drive: Frame K

Chapter 2

Getting Started

A few things you should do when you first receive the unit.

♦How the manual is organised

♦

Initial steps

♦Inspect the unit for transit damage

♦

Packaging and lifting

Getting Started

890SD Standalone Drive: Frame K Page 2-2

About this Manual

IMPORTANT Motors used must be suitable for Inverter duty.

Note Do not attempt to control motors whose rated current is less than 25% of the drive rated current. Poor

motor control problems may occur if you do.

This manual is intended for use by the installer, user and programmer of the 890 drive. It assumes a

reasonable level of understanding in these three disciplines.

Note Please read all Safety information before proceeding with the installation and operation of this unit.

It is important that you pass this manual on to any new user of this unit.

How the Manual is Organised

This Engineering Reference manual is organised into chapters, indicated by the numbering on the edge of

each page.

The manual is more detailed than the relevant QuickStart manual, and so is of use to the unfamiliar as well

as the high-end user.

Andere Handbücher für ac890

Andere Parker Gleichstromantrieb Handbücher

Parker

Parker Compax3S Bedienungsanleitung

Parker

Parker LVD1 Bedienungsanleitung

Parker

Parker 890CS Bedienungsanleitung

Parker

Parker LINKnet AC30P Bedienungsanleitung

Parker

Parker DC590PR Series Bedienungsanleitung

Parker

Parker DC590+ Bedienungsanleitung

Parker

Parker Compumotor 6000 Series Bedienungsanleitung

Parker

Parker Compumotor ZETA6104 Bedienungsanleitung

Parker

Parker Gemini GT6 Series Handbuch

Parker

Parker PDS Series Bedienungsanleitung

Parker

Parker OSP-L Bedienungsanleitung

Parker

Parker DC590C Series Bedienungsanleitung

Parker

Parker 650 Series Installations- und Betriebshandbuch

Parker

Parker HAS Series Bedienungsanleitung

Parker

Parker 590+ series Bedienungsanleitung

Parker

Parker Compax3H C3H1xxV4 Series Bedienungsanleitung

Parker

Parker 690+ series Installations- und Betriebshandbuch

Parker

Parker ViX250IM Bedienungsanleitung

Parker

Parker Compumotor ZETA6 Series Bedienungsanleitung

Parker

Parker Compumotor AX Bedienungsanleitung

Parker

Parker AC70 Bedienungsanleitung

Parker

Parker PSD04 Bedienungsanleitung

Parker

Parker Compax3S Bedienungsanleitung

Parker

Parker PDHX-E Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung

Beckhoff

Beckhoff AX8911 Bedienerhandbuch

Parker ac890 Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken