Peak Scientific Infinity 9000 Bedienungsanleitung

Infinity 9000

User Manual

2014 © Peak Scientific - Rev. 2 - 28/05/14

Infinity 9000 User Manual

Page 2 2014 © Peak Scientific - Rev. 2 - 28/05/14

Contents

Change History 3

How to use this manual 3

Warranties and Liabilities 4

Safety Notices 5

Symbols 5

Safety Notice to Users 5

Technical Specifications 6

Environment 6

Inlet Conditions 6

Outlet Gas 6

General 6

Introduction 7

Unpacking and Installation 7

General Dimensions 8

Air Connection 9

Fittings Kit 9

Commissioning 10

Pressure & Flow Settings 10

Maintenance Schedule 11

Service Schedule 11

Safely Isolated Condition 11

Infinity 9000 User Manual

Page 3 2014 © Peak Scientific - Rev. 2 - 28/05/14

Change History

Rev. Comment Name Date

1 Update to Service Kit Information Liam Couttie 16/04/2014

2 Part Number Amendment Liam Couttie 28/05/2014

How to use this manual

This manual is intended for end users and has been written so that it can either

be read as a step by step guide to installation and usage; or as a reference

document where you can skip to the relevant information.

Please review each of the following sections carefully.

Thank you for selecting Peak Scientific to meet your Gas Generation needs,

should you require any further assistance or support please do not hesitate to

contact Peak Scientific or the Peak Partner from which you purchased your

Generator.

Infinity 9000 User Manual

Page 4 2014 © Peak Scientific - Rev. 2 - 28/05/14

Warranties and Liabilities

1. The Company warrants that it has title to the Goods.

2. Subject to the provisions of this clause the Company warrants that the

Goods shall comply in all material respects with any specification referred

to in the Order Confirmation (as the same may be amended) and shall,

subject thereto, be free from defects in material and workmanship for the

lesser of a period of twelve months from the date of delivery or thirteen

months from the date of dispatch from the factory.

3. Save as provided in this clause and except where the Goods are sold to a

person dealing as a consumer (within the meaning of the Unfair Contract

Terms Act 1977) all warranties, conditions or other terms implied by statute

or common law are hereby expressly excluded save to the extent they may

not be lawfully excluded. When the Goods are sold to a consumer within

the meaning of the Unfair Contract Terms Act 1977 their statutory rights are

not affected by the provisions of this clause.

4. In the event of the Customer making a claim in respect of any defect in

terms of clause 2 hereof the Customer must.

4.1. Reasonably satisfy the Company that the Goods have been properly

installed, commissioned, stored, serviced and used and without

prejudice to the generality of the foregoing that any defect is not the

direct or indirect result of lack of repair and/or servicing, incorrect

repair and/or servicing, use of wrong materials and/or incorrect spare

parts

4.2. Allow the company to inspect the Goods and/or any installation and

any relevant packaging as and when reasonably required by the

Company.

5. Subject to the Company being notified of any defect as is referred to in

sub-clause 2 hereof within a reasonable time of it becoming apparent and

subject always to the terms of sub-clause 4 hereof, the Company shall, in its

option, replace or repair the defective Goods or refund a proportionate part

of the Price. The Company shall have no further liability to the Customer

(save as mentioned in sub-clause 6 hereof).

6. The Company shall be liable to indemnify the Customer in respect of any

claim for death or personal injury to any person in so far as such is

attributable to the negligence or breach of duty of the Company or any

failure by the Company to comply with the provisions of sub-clause 2

hereof.

7. Save as provided in sub-clause 2 hereof the Company shall not be liable in

respect of any claim by the Customer for costs, damages, loss or expenses

(whether direct, indirect, consequential or otherwise) or indemnity in any

respect howsoever arising including, but not by way of limitation, liability

arising in negligence (other than pursuant to clause 6 above) that may be

suffered by the Customer or any third party.

Infinity 9000 User Manual

Page 5 2014 © Peak Scientific - Rev. 2 - 28/05/14

Safety Notices

Symbols

This manual uses the following symbols to highlight specific areas important to

the safe and proper use of the Generator.

Table 1 - Safety Symbols

Safety Notice to Users

These instructions must be read thoroughly and understood before installation

and operation of your Peak Scientific Infinity 9000. Use of the Generator in a

manner not specified by Peak Scientific MAY impair the SAFETY provided by

the equipment.

When handling, operating or carrying out any maintenance, personnel must

employ safe engineering practices and observe all relevant local health and

safety requirements and regulations. The attention of UK users is drawn to the

Health and Safety at Work Act 1974, and the Institute of Electrical Engineers

regulations.

Nitrogen is not a poisonous gas, but if the concentration in

the inhaled air becomes too high there will be a risk of

asphyxiation.

WARNING

notice denotes a hazard. It calls attention to an operating

procedure, process or similar, which if not correctly performed or adhered

to, could cause personal injury or in the worst case death. Do not proceed

beyond a

WARNING

notice until the indicated conditions are fully

understood or met.

CAUTION

notice denotes a hazard. It calls attention to an operating

procedure, process or similar, which if not correctly performed or adhered

to, could cause damage to the Generator or the Application. Do not

proceed beyond a

CAUTION

notice until the indicated conditions are fully

understood or met.

Infinity 9000 User Manual

Page 6 2014 © Peak Scientific - Rev. 2 - 28/05/14

Technical Specifications

Environment

Min/Max Air Operating Temperature

5°C-30°C / 41°F-86°F

Maximum Relative Humidity

70%

Inlet Conditions

Min/Max Air Inlet Pressure

8.3-10 bar / 120-145 psi

Minimum Air inlet Flow

70 l/min

Outlet Gas

Maximum Gas output Pressure

100 psig

Maximum Pressure Drop (Outlet-Inlet)

8 psig

Maximum Gas output flow (zero grade air)

34 l/min (ATP)

Start-up time for purity

60 minutes

Particles

0.01um

General

Dimensions (cm/ins) WxDxH

47x16x76 / 19x7x30

Shipping Weight (Kg/lbs)

21 / 46

Infinity 9000 User Manual

Page 7 2014 © Peak Scientific - Rev. 2 - 28/05/14

Introduction

The Peak Scientific Infinity 9000 Nitrogen Generator is designed specifically for

use with LCMSMS applications, but has also been used successfully for

Turbovap or ELSD applications. The generator has been designed to produce

Nitrogen from an existing source of dry, oil free, compressed air in the

laboratory.

Unpacking and Installation

Although Peak Scientific take every precaution with safe transit and packaging,

it is advisable to fully inspect the unit for any sign of transit damage.

Check ‘SHOCKWATCH’ label for signs of rough handling prior to un-packing –

Any damage should be reported immediately to the carrier and Peak Scientific

or the Peak Partner from where the unit was purchased.

Follow the unpacking instructions posted on the side of the crate. It will require

two people to remove the unit from the shipping crate and to manoeuvre the

Generator onto the floor.

Please save the product packaging for storage or future shipment of the

Generator.

After unpacking and a visual inspection, the unit should be

placed in a ventilated area away from direct sunlight. Care

should be taken not to obstruct the ventilation holes on the

side of the unit. The Generator should be placed on a steady

and level base. The Infinity 9000 has been designed to fit

under most workbenches. Alternatively, the unit may be wall

mounted using the fixing slots provided.

Performance of the Generator (like all sophisticated

equipment) is affected by ambient temperatures. Prolonged

operation in temperatures exceeding 30°C will shorten the

life of the unit.

Infinity 9000 User Manual

Page 8 2014 © Peak Scientific - Rev. 2 - 28/05/14

General Dimensions

In addition to being floor or bench free standing, the generator may be fixed to

a wall in the upright position shown below.

The diagram shows the clearances and mounting hole centres required.

*Dimensions in mm.

Infinity 9000 User Manual

Page 9 2014 © Peak Scientific - Rev. 2 - 28/05/14

Air Connection

Infinity 9000 Generator should be connected to a clean, dry, OIL - FREE source

of compressed air. A minimum inlet pressure of 100 psig (6.7 barg) is required.

Any doubts as to the suitability of your compressed air supply should be

referred to Peak Scientific or any of their authorised partners.

The generator has a Breathing Air Filter with ¼” BSPT connection to the left

side of the unit. The Compressed Air supply should be connected here. This

filter will drain moisture and is equipped with an automatic drain. The drain

should be led to a convenient place. Nitrogen outlet is via an Activated Carbon

reverse-acting filter mounted on the right side, again with a ¼” BSPT

connection for outlet.

Fittings Kit

Supplied in the Fittings Kit are all the fittings required to connect the Infinity

9000 Generator to the application. The contents of the Fittings Kit are as

follows:

1. 6mm Push Fit Tube Fitting × 2

2. 6mm Tubing × 3m

3. N8 Supa Counter Sunk Screw x 2

4. Raw plug for No.8 Screw x 2

5. User Manual – Infinity 9000 × 1

All of the Generator output ports are located on the output panel at the rear of

the Generator.

Infinity 9000 User Manual

Page 10 2014 © Peak Scientific - Rev. 2 - 28/05/14

Commissioning

With the Generator installed as previously described, open the air supply to the

unit. The Generator has been pre-set in the factory to give the specified output

flow-rate and pressure. On reaching operational pressure the Generator will

produce Nitrogen.

The design of the generator is such that it will deliver up to the rated output

flow of Nitrogen at 100 psig (6.7 barg). Flow at any time is determined by

demand of the consuming equipment. In circumstances of no demand, the

generator remains operational and will provide nitrogen immediately as

demand resumes.

Pressure & Flow Settings

The above settings should allow the generator to be operated with all standard

configurations of instruments. Should the above settings not provide sufficient

flow or pressure for your application please contact Peak Scientific for

assistance.

Generator

Flow/Pressure

Infinity 9000 34l/min @ 100psig

Inhaltsverzeichnis

Andere Peak Scientific Tragbarer Generator Handbücher

Peak Scientific

Peak Scientific Precision Hydrogen 1200cc Bedienungsanleitung

Peak Scientific

Peak Scientific Solaris XE Bedienungsanleitung

Peak Scientific

Peak Scientific Precision Zero Air Series Bedienungsanleitung

Peak Scientific

Peak Scientific Corona 1010A Bedienungsanleitung

Peak Scientific

Peak Scientific NG3000 Bedienungsanleitung

Peak Scientific

Peak Scientific Infinity XE 50 0 Series Bedienungsanleitung

Peak Scientific

Peak Scientific ZA015 Handbuch

Peak Scientific

Peak Scientific Genius 1025 Bedienungsanleitung

Peak Scientific

Peak Scientific Genius 105X Series Bedienungsanleitung

Peak Scientific

Peak Scientific Genius 1022 Bedienungsanleitung

Peak Scientific

Peak Scientific PG14L Bedienungsanleitung

Peak Scientific

Peak Scientific SL 100 cc Bedienungsanleitung

Peak Scientific

Peak Scientific AMD 200 Bedienungsanleitung

Peak Scientific

Peak Scientific Genius 3030 Bedienungsanleitung

Peak Scientific

Peak Scientific Genius 1024 Bedienungsanleitung

Peak Scientific

Peak Scientific FUSION 1010 Bedienungsanleitung

Peak Scientific

Peak Scientific Infinity XE 60 Series Bedienungsanleitung

Peak Scientific

Peak Scientific Precision SL Series Bedienungsanleitung

Peak Scientific

Peak Scientific Infinity XE 60 Series Bedienungsanleitung

Peak Scientific

Peak Scientific NM20ZA Bedienungsanleitung

Peak Scientific

Peak Scientific Infinity 1032 Bedienungsanleitung

Peak Scientific

Peak Scientific TOC 1500 Bedienungsanleitung

Peak Scientific

Peak Scientific NG2000 Bedienungsanleitung

Peak Scientific

Peak Scientific MS Bench SCI 1 Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

ConMed

ConMed 7550 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

evertz

evertz 7700 Series Bedienungsanleitung

Power Stroke

Power Stroke PS906025 Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

PowerBoss

PowerBoss PowerBoss Bedienungsanleitung

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung