Peco T190 Bedienungsanleitung
T190
UNIVERSAL PROGRAMMABLE THERMOSTAT
OWNER’S MANUAL
3
CONTENTS
General
Front Panel Reference
Back Panel Reference
Display Reference
Normal Mode
Temperature Display
Saving Changes
▲ and ▼ Button Operation
LCD Backlight
System Switch Operation
Fan Switch Operation
Setting the Day & Time
Programming Time & Temperature Settings
Factory Program
Custom Program
Copy Feature
Turning an Event’s Program Off or On.
Time & Temperature Programming Example
Overriding the Program
Filter and System Usage Indicators
Reset Button Operation
Custom Program Worksheet
................... 5
................... 6
................... 7
................... 8
...................12
...................13
...................13
...................14
...................14
...................15
...................16
...................16
...................17
...................17
...................18
...................20
...................21
...................22
...................24
...................25
...................28
...................30
4
!Caution !
• FOLLOW T190 INSTALLATION INSTRUCTIONS BEFORE PROCEEDING.
• READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO OPERATE THIS
THERMOSTAT.
• Retain these instructions for future reference. This product, when installed, will be part of an
engineered system whose specications and performance characteristics are not designed or
controlled by the thermostat’s manufacturer.
• If at any time your system does not operate properly, contact a qualied service person.
• Care should be used to avoid static discharge to the thermostat.
IMPORTANT NOTE
This thermostat was shipped with factory default settings. Your thermostat’s installer may have
congured the thermostat differently from the factory default settings, and may have modied or
disabled certain features. Contact the installer or a service technician if you have questions about
the thermostat’s conguration.
5
GENERAL
The T190 thermostat is a low-voltage programmable thermostat designed to control most
conventional and heat pump systems. It is congurable for up to two-stage heat and two-stage
cool. The thermostat is 7-day programmable. Different heating and cooling setpoints and times are
programmable for 4 time periods per day. The thermostat can also be set to non-programmable
(manual) operation.
The T190 thermostat does not need batteries to store user-congured settings in memory. During
power loss its internal memory saves the all user settings, congurations, and usage counters
for unlimited time.
6
FRONT PANEL REFERENCE
Liquid Crystal Display with amber backlight
UP and DOWN Buttons
LIGHT Button
PROGRAM Button
SYSTEM Switch
USAGE Button
DATE/ TIME Button
FAN Switch
TEMPERATURE Button
ACCEPT Button
RESET Button (recessed)
Battery Enclosure
1
2
3
4
5
6
11
10
12
9
8
7
12
3
4
5
6
11
10
12
9
8
7
7
BACK PANEL REFERENCE
The three switches on the back panel have been positioned by your thermostat’s installer. Two
of the switches congure the thermostat for the type of HVAC equipment being controlled, and
the third switch species whether the thermostat is hardwired or using battery power. Changing
the switch positions may cause your system or thermostat to not operate properly. Refer to the
installation instructions for more information about these switches.
8
DISPLAY REFERENCE
2
1
3
4
5
6
8
7
3
9
System Mode Display
HEAT – indicates the system is in heating mode.
HEAT – indicates rst stage heating is on.
HEAT – indicates second stage heating is on.
EM. HEAT – indicates emergency heat (auxiliary heat) is on.
COOL – indicates the system is in cooling mode.
COOL – indicates rst stage cooling is on.
COOL – indicates second stage cooling is on.
AUTO – indicates the system will automatically changeover between heating and cooling modes
as the room temperature varies.
OFF – indicates no heating or cooling will be activated at any temperature.
Temperature Display
Default display (Normal Mode): Digits display the current room temperature.
During programming: Digits are used to set the desired heating and cooling setpoint
temperatures.
°F or °C – indicates Fahrenheit or Celsius temperature, depending upon which was congured
at time of installation.
Day & Time Display
Default display: Digits indicate the current time, and day abbreviations indicate the current day.
1
2
3
1
2
A
1
2
10
During programming: Digits and days are used to program time periods.
PM – indicates PM time when clock is in 12-hour time mode. When PM is not displayed, clock is
in AM time.
Program Display
PROG ON – indicates the thermostat is running the programmed time and temperature settings,
which may be the default factory program or a custom program specied by the user.
OCC1, UNOCC1, OCC2, and UNOCC2 – these are “event icons” indicating the four time
periods per day: two occupied time periods (“OCC1”, “OCC2”) and two unoccupied time periods
(“UNOCC1”, “UNOCC2”). Each time period has its own unique setpoint temperatures.
RECOVERY – indicates the heating or cooling system is in the process of reaching the target
setpoint of the next programmed time period. The RECOVERY icon remains lit until the target
setpoint is reached.
Program Override Indicators
OVERRIDE – indicates thermostat is in temporary manual operation. (Programmed settings are
off, but not lost.)
PERMANENT OVERRIDE – indicates thermostat is in permanent manual operation.
Fan Operation Indicators
FAN ON – indicates constant, continuous fan operation.
FAN AUTO – indicates fan is on only when there is heating or cooling demand.
4
5
6
Andere Handbücher für T190
1
Inhaltsverzeichnis
Sprachen:
Andere Peco Thermostat Handbücher
Peco
Peco TW180 Bedienungsanleitung
Peco
Peco TH-109 Bedienungsanleitung
Peco
Peco T4500 Bedienungsanleitung
Peco
Peco Performance pro T12000 Bedienungsanleitung
Peco
Peco TB158 Bedienungsanleitung
Peco
Peco TA180-001 Bedienungsanleitung
Peco
Peco TF115P-002 Bedienungsanleitung
Peco
Peco T2500-01 WavePRO Bedienungsanleitung
Peco
Peco T168 Bedienungsanleitung
Peco
Peco T180 Bedienungsanleitung
Peco
Peco T190 Bedienungsanleitung
Peco
Peco T8532-IAQ Bedienungsanleitung
Peco
Peco Performance Pro T12000 Series Bedienungsanleitung
Peco
Peco TF115P-003 Bedienungsanleitung
Peco
Peco TA167 Bedienungsanleitung
Peco
Peco TA155 Bedienungsanleitung
Peco
Peco PERFORMANCE PRO MULTI-FAN Bedienungsanleitung
Peco
Peco Performance pro T4000 series Bedienungsanleitung
Peco
Peco Peco TW206 Bedienungsanleitung
Peco
Peco T168 Bedienungsanleitung
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
