Peco WavePRO K2500-001 Bedienungsanleitung

WavePRO Wireless Programmable

T2500 Thermostat & R2500 Receiver

OPERATING

MANUAL

Model K2500-001

Thank you for choosing the PECO WavePROTM Wireless System (Model K2500-001).

The PECO WavePROWireless System is a wireless thermostat transmitter and receiver. It is

designed for use with conventional (gas, oil, electric) or heat-pump systems. It can support up to

2-HEAT/ 2-COOL conﬁgurations in conventional systems and 3-HEAT/ 2-COOL conﬁgurations

in heat pump applications. The PECO WavePRO Wireless System is comprised of the T2500

wireless thermostat paired with the R2500 wireless receiver. This operating manual contains

important information on operating the T2500 thermostat and R2500 receiver.

The T2500 thermostat may be powered by batteries, 24 VAC, or by both. The thermostat may

be programmed for operation on a 7-day, 5/2-day, 5/1/1-day, or 1-day operational basis, with

four time-periods per day. The R2500 wireless receiver is powered by 24 VAC only and is wired

directly to the HVAC equipment it controls.

THE PECO WAVEPRO WIRELESS SYSTEM

Product Speciﬁcations (Model K2500-001)

Temperature Range: 50° to 90° F (10° to 32° C)

Differential: 1° F (0.5°C)

Input Power

T2500 Thermostat: Two AA alkaline batteries or 24 VAC, 50/60 Hz

R2500 Receiver: 24 VAC, 50/60 Hz

Wireless Type 902 to 928 MHz Band, Frequency Hopping Spread Spectrum (FHSS)

Wireless Range 100 feet (30.48 meters) typical reliable range in open air

Operation Temperature 0° to 120° F (-17° to 48°C)

Shipping Temperature -20° to 130°F (-28°to 54°C)

Operating Humidity 5% to 95% RH, non-condensing

Physical dimensions

T2500: 4.5”H x 5.75” W x 1.1”D

R2500: 4.8”H x 3.8”W x 1.3”D

Read and save this operating manual.

TABLE OF CONTENTS

The PECO WavePRO Wireless System..............................................................................................2

T2500 THERMOSTAT

Front panel display reference: T2500 thermostat................................................................................6

Button operation ..................................................................................................................................7

The T2500 display .............................................................................................................................10

The T2500 display menus ................................................................................................................. 11

Set the time and day .........................................................................................................................14

Selecting the Fahrenheit or Celsius temperature ..............................................................................15

Programming the T2500 ....................................................................................................................16

Custom program................................................................................................................................17

Overriding the program......................................................................................................................22

FCC COMPLIANCE...................................................................................................................................24

!CAUTION!

•READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO OPERATE THIS THERMOSTAT AND

RECEIVER.

• FOLLOW THE WAVEPRO WIRELESS INSTALLATION INSTRUCTIONS BEFORE PROCEEDING.

• Contact a qualiﬁed service person if at any time your system does not operate properly.

• Use care to avoid static discharge to the thermostat and receiver.

• Failure to observe safety information and comply with instructions could result in PERSONAL INJURY,

DEATH AND/OR PROPERTY DAMAGE.

• To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use

only wiring with insulation rated for full thermostat operating voltage.

• To avoid potential ﬁre and/or explosion do not use in potentially ﬂammable or explosive atmospheres.

• This product, when installed, will be part of an engineered system whose speciﬁcations and performance

characteristics are not designed or controlled by PECO. You must review your application and national

and local codes to assure that your installation will be functional and safe.

• Retain these instructions for future reference.

IMPORTANT NOTE: This thermostat was shipped with factory default settings. Your thermostat’s installer

may have conﬁgured the thermostat differently from the factory-default settings, and may have modiﬁed

or disabled certain features. Contact the installer or a service technician if you have questions about the

thermostat’s conﬁguration.

Following are the T2500 thermostat Display and buttons:

FRONT PANEL DISPLAY REFERENCE: T2500 THERMOSTAT

SETBACK

MTUWTHFSASU DFLTSLEEP

OFF

HEAT

COOL

AUTO

FAN

Auto ON

SET

HOLD

COPY

Aux

SYSTEM button

Display

FAN button

UP ▲and

DOWN ▼

buttons

PROGRAM

button

System Button

The SYS (system) button is used to control the operating mode of the T2500. Press the

SYS button once to light up the menu options, as described below. Continue pressing

SYS button to scroll through menu options. As you scroll, the menu option being accessed

(operating mode) will ﬂash. To select that option, allow the display to automatically time

out. The T2500 saves the “ﬂashing” option and switches the thermostat to the selected

operating mode. The SYS modes are:

HEAT – Indicates the system is in heating mode.

COOL – Indicates the system is in cooling mode.

AUTO – Indicates the system will automatically changeover between heating

and cooling modes as the room temperature varies.

OFF – Disables thermostat outputs.

SETBACK –Indicates the heating or cooling system is operating in manual setback

mode. (To appear, SETBACK must be selected in “Advanced conﬁguration.” See the

“PECO WavePRO Wireless System Installation Guide”).

NOTE: The SYS button is also used to scroll through the Service Menu in advanced

conﬁguration.(see “Advanced conﬁguration” in the “PECO WavePRO Wireless

System Installation Guide”).

BUTTON OPERATION

Fan Button

The FAN button is used to control the fan mode. Pressing FAN will light up the two fan

mode options described below. Press FAN to scroll through the options. As you scroll,

the “ﬂashing” option is automatically selected. The T2500 thermostat times out and

automatically saves the “ﬂashing” option. The modes are:

ON – Turns on continuous fan, even if no demand exists for heating

or cooling.

AUTO – Sets fan cycles with demand for heating and cooling.

Program Button

The PROG (program) button is used to program the T2500. Press PROG button once

to light up ﬁve program mode options, described below. Press ▲or ▼buttons to scroll

through the options. As you scroll, the option being accessed will ﬂash. To select the

ﬂashing option (e.g.,”CLOCK”), press PROG again, and an associated submenu appears.

Press ▲or ▼to scroll through the submenu options. Press the PROG button to select the

desired option. The ﬁve program mode options are:

CLOCK –Sets the current time and day (see “Setting the time and day”).

°F / °C –Sets temperature display to Fahrenheit or Celsius. Default setting is Fahrenheit

(see “Selecting the Fahrenheit or Celsius temperature”).

BUTTON OPERATION

SET – Initiates the time and temperature schedule for a particular day or group of days.

Allows you to reset the thermostat to the factory default ENERGY STAR®program.

(see “Programming the T2500”).

COPY – Copies one day’s schedule to another day or to another group of days (see

“Programming the T2500”).

HOLD – Puts the thermostat in Temporary or Permanent Hold mode. Overrides your

programmed settings but does not lose them (see “Overriding the program”).

Up ▲and ▼Down Button Operation

The up ▲and ▼down buttons are used to create a temporary override, thereby

increasing or decreasing the current setpoint, or to access the Service Menu. The buttons

are also used with the PROG button to select various programming options.

BUTTON OPERATION

Figure 1 below illustrates the various display menus in the T2500 display. The menus are:

System Mode Display Programming Commands Program Override Commands

Temperature Display Time Period Indicators Service Indicator

Time & Day Display Fan Operation Indicators

THE T2500 DISPLAY

SETBACK

MTUWTHFSASU DFLTSLEEP

OFF

HEAT

COOL

AUTO

FAN

Auto ON

SET

HOLD

COPY

Aux

Figure 1.

T2500

Display

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Peco Thermostat Handbücher

Peco

Peco TF115P-003 Bedienungsanleitung

Peco

Peco Peco TW205 Bedienungsanleitung

Peco

Peco T168 Bedienungsanleitung

Peco

Peco T158 Bedienungsanleitung

Peco

Peco WAVE WIRELESS TW205-206 Bedienungsanleitung

Peco

Peco TA155-046 Installationsanleitung

Peco

Peco TH170 Bedienungsanleitung

Peco

Peco T2500-01 WavePRO Bedienungsanleitung

Peco

Peco Performance pro T4000 series Bedienungsanleitung

Peco

Peco Performance pro T12000 Bedienungsanleitung

Peco

Peco Peco RW205 Bedienungsanleitung

Peco

Peco TA167 Bedienungsanleitung

Peco

Peco TH-109 Bedienungsanleitung

Peco

Peco Performance Pro T4900 School Bedienungsanleitung

Peco

Peco T8000 series Bedienungsanleitung

Peco

Peco PERFORMANCE PRO MULTI-FAN Bedienungsanleitung

Peco

Peco TC170 Bedienungsanleitung

Peco

Peco Performance PRO TW180 Bedienungsanleitung

Peco

Peco T190 Bedienungsanleitung

Peco

Peco TB158 Bedienungsanleitung

Peco

Peco TB167 Benutzerhandbuch

Peco

Peco T8000 series Bedienungsanleitung

Peco

Peco WAVE WIRELESS TW205-206 Bedienungsanleitung

Peco

Peco T12500 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Honeywell

Honeywell T6811 Bedienungsanleitung