PEERLESS Solid-Point PLCM 2 Leitfaden
ISSUED:02-14-03 SHEET #: 201-9019-7 02-16-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 5
Read instruction sheet before you start installation and assembly.
Model:PLCM 2
Maximum Load Capacity:
225 lb (102.3 kg)
Installation and Assembly -Solid•Point™Flat Panel
Straight Column Mount
TABLE OF CONTENTS
Installations
InstallingPLCM2to ceiling.........................page 3
Applications
Installation of plasma screens and
30" or larger LCD screens.......................... page 4
Installation of small LCD screens............... page 5
• Installer must verify that the wall will safely support the
combinedweightofallattachedequipmentand
hardware.
WARNING
ISSUED:02-14-03 SHEET #: 201-9019-7 02-16-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
2 of 5
Description Qty Part #
Aceiling arm box 1 201-1062
Btilt bracket 1 200-1552
Dretaining collar 1 1800-375
EM5 x .8 x 10mm penta-pin™screw 4 505-9010
F2.875 OD x 2.125 ID x .062 H fiber washer 1 540-9432
GM10 x 1.5 x 15 mm penta-pin screw 8 520-9263
HM10 x 2" penta-pin tool 1 520-9260
IM5 x 1" penta-pin tool 1 520-9249
JM5 x .8 x 8 mm phillips Type F screw 4 520-1167
Before you begin, make sure all parts shown are included with your product.
PARTS LIST
D
F
A
B
Note: Some parts may not appear exactly as illustrated.
HI
E
G
J
Fasteners
ISSUED:02-14-03 SHEET #: 201-9019-7 02-16-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
3 of 5
ceiling plate (not included)
Threadsupportpipe(notincluded)intothreadedfittinginceilingplate(notincluded).Tighten-fourorfivecomplete
turns - leaving slot aligned with one small hole in the side of the ceiling plate threaded fitting. Insert and tighten one
M5 x .8 x 10 mm penta-pin screw provided with ceiling plate as shown. Use the M5 penta-pin tool (I) to tighten
screw. BY HAND, insert four M10 x 1.5 x 15 mm penta-pin screws (G) into threaded holes in the sides of ceiling
armbox(A).Leave approximately1/4" ofexposed thread.Slideceilingarmbox(A)andfiberwasher(F)ontoend
ofsupportpipe.Threadretainingcollar(D)ontothreadedendofsupportpipe. Tighten-fourorfivecompleteturns.
Slide ceiling arm box (A) down so that it is on top of retaining collar (D). Insert and tighten one M5 x .8 x 10 mm
penta-pinscrew(E) intoretaining collar(D)as shown. Insertone M5penta-pinscrew (E)through thetabon the
back of ceiling arm box (A). Use M5 penta-pin tool (I) to tighten screw just enough to stabilize support pipe.
Note: ADJ or EXT extension columns can be used in combination with, or in place of support pipe to achieve
differentlengths.
E
D
A
F
D
G
1/4"
G
E
M5 screw
BACKOF CEILING
ARMBOX
support pipe (not included)
ISSUED:02-14-03 SHEET #: 201-9019-7 02-16-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
4 of 5
Hang tilt bracket (B) onto ceiling arm box (A).
Adjust tilt as desired and tighten four M10 x 1.5 x
15 mm penta-pin screws (G) securely using M10
penta-pintool (H).
B
A
G
Attach tilt bracket (B) to adapter plate using four M10 x 15 mm penta-pin screws (G) in accordance with appropri-
atedrawingbelow.Tighten usingM10 penta-pintool(H).
G
B
Note: Refertoadapter plateinstruction sheetforattachment ofadapter platetoplasma before proceedingwith step2.
LANDSCAPE
LANDSCAPE PORTRAIT
LANDSCAPE PORTRAIT
B
A
G
B
G
ADAPTERPLATE
ADAPTERPLATE
PLASMASCREEN
PLASMASCREEN
Note:Screen andadapter
platemay appeardifferent
thanillustrated.
• For a safe assembly be sure to fully tighten four
screws(G).
WARNING
ISSUED:02-14-03 SHEET #: 201-9019-7 02-16-06
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
5 of 5
ADAPTERBRACKET
B
J
Attach tilt bracket (B) to adapter bracket using four M5 x 8 mm phillips screws (J).
Note: Do not use M5 x 6 mm screws that are included with the adapter bracket.
Note: Refertoadapterbracketinstruction sheetfor attachmentof adapterbrackettoLCDscreen beforeproceeding with
step 2.
Hang tilt bracket (B) onto ceiling arm box (A).Adjust tilt as desired and tighten four
M10 x 1.5 x 15 mm penta-pin screws (G) securely using M10 penta-pin tool (H).
B
A
G
©2004Peerless Industries,Inc. All rightsreserved.
Peerlessis aregistered trademarkof PeerlessIndustries,Inc.
Solid•Pointis atrademarkofPeerlessIndustries, Inc.
Allother brand andproduct namesare trademarksorregistered trademarksof theirrespective owners.
Note:Screen andadapter
platemay appeardifferent
thanillustrated.
LCDSCREEN
• For a safe assembly be sure to fully tighten four
screws(G).
WARNING
Inhaltsverzeichnis
Andere PEERLESS Rack & Stand Handbücher
PEERLESS
PEERLESS SmartMount SF650 Leitfaden
PEERLESS
PEERLESS DS-VL-H018 Leitfaden
PEERLESS
PEERLESS WSP820 Leitfaden
PEERLESS
PEERLESS ACC 314 Leitfaden
PEERLESS
PEERLESS Paramount PPF Leitfaden
PEERLESS
PEERLESS ACC517 Leitfaden
PEERLESS
PEERLESS SmartMount ST 630P Leitfaden
PEERLESS
PEERLESS ST 640 Leitfaden
PEERLESS
PEERLESS Paramount PT650 Leitfaden
PEERLESS
PEERLESS PARAMOUNT PA740 Bedienungsanleitung
PEERLESS
PEERLESS DS-VW660 and assembly Leitfaden
PEERLESS
PEERLESS PRG-1 Leitfaden
PEERLESS
PEERLESS IWB600-WB Leitfaden
PEERLESS
PEERLESS Mobile Videowall Trolley PDVWM 2x2 46 55 L Leitfaden
PEERLESS
PEERLESS PARAMOUNT PA730 Leitfaden
PEERLESS
PEERLESS A100IWBMOUNT Leitfaden
PEERLESS
PEERLESS Vision Point LCFS 100 Leitfaden
PEERLESS
PEERLESS SR1G Leitfaden
PEERLESS
PEERLESS HDS-S Leitfaden
PEERLESS
PEERLESS MIS488 Leitfaden
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
