Pepperl+Fuchs ICA-8DIO4M1-G20-IO Bedienungsanleitung

ICA-8DIO4M1-G20-IO

Motor Control Module with

Standard Process Data

Manual

With regard to the supply of products, the current issue of the following document is applicable: The

General Terms of Delivery for Products and Services of the Electrical ndustry, published by the Central

Association of the Electrical ndustry (Zentralverband Elektrotechnik und Elektroindustrie (ZVE ) e.V.)

in its most recent version as well as the supplementary clause: "Expanded reservation of proprietor-

ship"

Worldwide

Pepperl+Fuchs Group

Lilienthalstr. 200

68307 Mannheim

Germany

Phone: +49 621 776 - 0

E-mail: info@de.pepperl-fuchs.com

orth American Headquarters

Pepperl+Fuchs nc.

1600 Enterprise Parkway

Twinsburg, Ohio 44087

USA

Phone: +1 330 425-3555

E-mail: sales@us.pepperl-fuchs.com

Asia Headquarters

Pepperl+Fuchs Pte. Ltd.

P+F Building

18 Ayer Rajah Crescent

Singapore 139942

Phone: +65 6779-9091

E-mail: sales@sg.pepperl-fuchs.com

https://www.pepperl-fuchs.com

CA-8D O4M1-G20- O

Contents

2021-02

1 Introduction................................................................................................................ 5

1.1 Content of this Document............................................................................. 5

1.2 Target Group, Personnel ............................................................................... 5

1.3 Symbols Used ................................................................................................ 5

1.4 General Safety Information........................................................................... 6

1.5 Konformitätserklärung .................................................................................. 6

2 Product Description .................................................................................................. 8

2.1 Use and Application ...................................................................................... 8

2.2 Housing.........................................................................................................10

2.3 LED Indicators ............................................................................................. 10

2.4 Interfaces and Connections ....................................................................... 12

2.5 IO-Link Interface Properties .......................................................................13

2.6 Braking Energy Power Feedback ...............................................................13

3 Installation................................................................................................................14

3.1 Storage and Transportation ........................................................................14

3.2 Unpacking ....................................................................................................14

3.3 Mounting.......................................................................................................14

3.4 Connecting the Auxiliary Current Flat Cable ............................................ 14

3.5 Connecting Motors and Sensors ...............................................................17

4 IO-Link Process Data...............................................................................................18

4.1 Input Process Data Structure .....................................................................18

4.2 Output Process Data Structure ..................................................................19

5 IO-Link Parameters..................................................................................................22

5.1 Device-Specific Operating/Configuration Parameters.............................22

5.2 Device Parameters....................................................................................... 27

5.3 Standard Configuration Parameters..........................................................28

5.4 Specific Device Information........................................................................ 29

5.5 Operating Monitor........................................................................................ 29

5.6 Diagnostics .................................................................................................. 30

5.7 Device-Specific Commands........................................................................33

0.1ICA-8DIO4M1-

CA-8D O4M1-G20- O

Contents

2021-02

6 Repair and Servicing ...............................................................................................34

7 Appendix...................................................................................................................35

7.1 Event Codes .................................................................................................35

7.2 Error Codes ..................................................................................................36

7.3 ASCII table ....................................................................................................37

CA-8D O4M1-G20- O

ntroduction

2021-02

1 Introduction

1.1 Content of this Document

This document contains information required to use the product in the relevant phases of the

product life cycle. This may include information on the following:

•Product identification

•Delivery, transport, and storage

•Mounting and installation

•Commissioning and operation

•Maintenance and repair

•Troubleshooting

•Dismounting

•Disposal

The documentation comprises the following parts:

•This document

•Datasheet

n addition, the documentation may comprise the following parts, if applicable:

•EU-type examination certificate

•EU declaration of conformity

•Attestation of conformity

•Certificates

•Control drawings

•nstruction manual

•Other documents

1.2 Target Group, Personnel

Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-

ing lies with the plant operator.

Only appropriately trained and qualified personnel may carry out mounting, installation, com-

missioning, operation, maintenance, and dismounting of the product. The personnel must have

read and understood the instruction manual and the further documentation.

Prior to using the product make yourself familiar with it. Read the document carefully.

1.3 Symbols Used

This document contains symbols for the identification of warning messages and of informative

messages.

ote

For full information on the product, refer to the further documentation on the nternet at

www.pepperl-fuchs.com.

Table 1.1 CA-8D O4M1-G20- O

2021-02

CA-8D O4M1-G20- O

ntroduction

Warning Messages

You will find warning messages, whenever dangers may arise from your actions. t is mandatory

that you observe these warning messages for your personal safety and in order to avoid prop-

erty damage.

Depending on the risk level, the warning messages are displayed in descending order as fol-

lows:

Informative Symbols

Action

This symbol indicates a paragraph with instructions. You are prompted to perform an action or

a sequence of actions.

1.4 General Safety Information

Responsibility for planning, assembly, commissioning, operation, maintenance, and dismount-

ing lies with the plant operator.

nstallation and commissioning of all devices may be performed only by trained and qualified

personnel.

t is dangerous for the user to carry out modifications and/or repairs and doing so will void the

warranty and exclude the manufacturer from any liability. n the event of any serious errors, stop

using the device. Secure the device against unintended operation. To have the device repaired,

return it to your local Pepperl+Fuchs representative or your sales center.

1.5 Declaration of Conformity

This product was developed and manufactured in line with the applicable European standards

and directives.

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants, or result in

their complete failure.

ote

This symbol brings important information to your attention.

ote

Disposal

Electronic waste is hazardous. When disposing of the equipment, observe the current statutory

requirements in the respective country of use, as well as local regulations.

CA-8D O4M1-G20- O

ntroduction

2021-02

The product manufacturer, Pepperl+Fuchs Group, 68307 Mannheim, Germany, has a certified

quality assurance system that conforms to SO 9001.

ote

A declaration of conformity can be requested from the manufacturer.

ISO9001

2021-02

CA-8D O4M1-G20- O

Product Description

2 Product Description

2.1 Use and Application

General

The CA-8D O4M1-G20- O* roller motor control module is an O-Link connection module for

controlling up to four 24 V DC roller motors. The module enables process-specific control of

features including the following on the connected roller motors:

•Direction of rotation

•Speed

•Start and stop ramps

The module is ideally suited for implementing complex conveying tasks. The module is opti-

mized for nterroll EC310 roller motors but can also be used for compatible DC motors, e.g.,

Rulmeca BL3.

Digital Inputs and Outputs

To be able to optimally control the roller motor rollers based on conditions in the field environ-

ment (e.g., switching signal of a light barrier), the module has 8 freely configurable digital

inputs/outputs (PNP). The input characteristic of the inputs corresponds to type 3 in accor-

dance with EN 61131-2. The outputs are resistant to short circuits and overloading.

The module and the digital inputs/outputs are supplied via O-Link. Each sensor power supply

can be loaded with 200 mA.

For details regarding connection, see chapter 3.5.

Counters

The module has a counter input for connecting an incremental rotary encoder. You can connect

a single- or dual-input rotary encoder with a counting frequency of up to 10 kHz.

•A single-input rotary encoder is connected to O1.

•A dual-input rotary encoder is connected to O1 and O2, and takes the direction of rota-

tion into account.

Roller Motors

The roller motors are supplied with power via an external auxiliary voltage. The auxiliary volt-

age is supplied to the roller motor control module via a flat cable.

•The permissible auxiliary voltage is 18 V to 30 V.

•The maximum continuous current load for each roller motor is 2.5 A.

•For each roller motor, a maximum current load of 5 A is permitted briefly (< 2 s).

f a roller motor is connected to a motor output, the output must be configured accordingly. The

following statuses are transmitted via the process data:

•Roller motor fault

•Fusing

•Switching on and off

ote

nverting the input channels affects the counter. f the counting direction is to be reversed for a

dual-input rotary encoder, one of the two inputs must be inverted.

The counting function has no effect on how inputs are processed at O1 and O2. The input

filters are not taken into account for the counting function.

Table 2.1 CA-8D O4M1-G20- O

CA-8D O4M1-G20- O

Product Description

2021-02

•Direction of rotation

•SpeedDifferent Functions Based on ODD91

•Start/stop ramps1

The output at pin 2 is resistant to overloading and short circuits. The roller motor supply is pro-

tected by a fuse.

The speed is expressed as a percentage. The output voltage for controlling the roller motor

speed is output between the configurable limits. The lower limit corresponds to 0 % of the max-

imum speed, the upper limit corresponds to 100 % of the maximum speed.

For details regarding connection, see chapter 3.5.

Braking Function

You can use the process data to activate a brake for each roller motor. An activated brake

causes the analog velocity output to be lowered to 0 V after reaching the lower limit. For some

roller motors, this is mandatory to activate the brake function. This setting has no effect on

nterroll EC310 roller motors, as these roller motors always brake.

Start/Stop Ramps

The configurable ramp duration defines the time from stationary (0 %) to maximum speed

(100 %), or from maximum speed to stationary. When the terminal velocity is lower, the ramp

duration is shorter.

General IO-Link Information

O-Link is a standardized point-to-point O technology ( EC 61131-9) between an O-Link mas-

ter that controls communication and an O-Link device that acquires or executes process val-

ues at the lowest sensor/actuator level. n addition to transmitting process data, O-Link also

provides access to detailed identification, diagnostic and parameter data of the respective O-

Link device.

O-Link uses unshielded 3- or 5-wire cables with a maximum length of 20 meters between the

O-Link master and O-Link device, and enables transfer rates of 4.8 kbit/s (COM1), 38.4 kbit/s

(COM2), or 230.4 kbit/s (COM3). The O-Link interface is backward compatible with the

24 V /O signals specified in EC 61131-2.

Different Functions Based on IODD

The module has two different process data structures - Standard (STD) and Extended (EXT).

Which structure is used depends on the O-Link device D that is set. While the standard pro-

cess data image assigns 8 bytes of input data and 6 bytes of output data, the extended process

data image uses 8 bytes of input data and 18 bytes of output data. n addition to the functions of

the standard process data image, the extended process data image enables control of the

start/stop ramps and continuous, real-time adjustment of the roller motor speed via the process

data.

1. Depending on the selected process data structure, see "Different Functions Based on ODD" on page 9

Tip

f a motor output is not configured for a roller motor, pin 2 of the corresponding output can be

used as a digital power output, which is supplied from the auxiliary voltage PWR. A separate bit

for controlling the power output is available in the process data.

2021-02

CA-8D O4M1-G20- O

Product Description

For detailed information on the structure and assignment of the process data image, see chap-

ter 4.

2.2 Housing

The housing is made entirely of plastic, except for the hinge pins for the hinge cable guide.

The housing consists of the following main components:

•a mounting base with integrated electronics

•a folding guide cage as a cable guide for the AS- nterface flat cable

Figure 2.1 Housing dimensions

2.3 LED Indicators

Figure 2.2 LED indicators

Tip

You can download the corresponding manual for each version from our website www.pepperl-

fuchs.com.

100

120

122

135.5

16.6

27.5

24V Power

M1 M2 IO1 IO2 IO3 IO4 IO5 IO6 IO7 IO8 M3 M4

MOT1

MOT2

MOT3

MOT4

IO1/2

IO3/4

IO-Link

IO5/6

IO7/8

PWR-ERR

IOL-ERR

ote

The LEDs on the inputs and outputs indicate the physical state of the respective channel. You

can find the invertible logical state of a channel in the process data.

Inhaltsverzeichnis

Andere Pepperl+Fuchs Steuereinheit Handbücher

Pepperl+Fuchs

Pepperl+Fuchs VLX-F231-B6 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VAA-2E-KE1-S Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VBA-2E-KE5-IJL Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PS1000-D2-24.40.RM Handbuch

Pepperl+Fuchs

Pepperl+Fuchs VBA-2A-KE5-IL/UL Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs ICE1-8IOL-S2-G60L-V1D Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs SC4-2 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs IUT-F190-R4-V1 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VBA-4E-KE5-IL Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs ICE11-8IOL-G60L-V1D Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs IC-KP2-2HB17-2V1D Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs WCS-ECG410 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs WCS-EIG410 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VAA-2E1A-CB10-SJ/E2J-FL Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs ICE11-8IOL-G60L-V1D Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VAA-2E2A-KE1P-S/E2 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs EtherCAT WCS-ECG110 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PSU-IDM160-BD-1D-J1-N0 Series Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs IQT-F116-R4M-V1 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VBA-4E4A-G20-ZEJ/M3L-P9 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs IRI-KHD2-4.RX Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs PS1000-A6-24.10.R Handbuch

Pepperl+Fuchs

Pepperl+Fuchs VBA-4E4A-G20-ZEJ/M48L-P12 Bedienungsanleitung

Pepperl+Fuchs

Pepperl+Fuchs VAA-2E-G4-SN Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung