1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give
specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties and all
exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and
service. A defective product may be returned for a free replacement within 90 days from the date of purchase, provided that
product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one year from date of
purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall disclose to be defective and
under warranty.
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under
normal use and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not
designed, or which has been repaired or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse, neglect,
accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its
products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or
implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of
merchantability and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for
personal, family or household use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of
merchantability (and, if otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the particular
qualities or characteristics, and for the duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner
related to any product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective
product or part shall be the repair, or replacement thereof as provided above.
OPERATION
1. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired.
2. Check the Wheel operation by slowly pulling the Hose out. You should hear a clicking noise.
3. TolocktheHose,pullitoutaminimumof1/2revolutionanditwillstaylockedaftertherst,second,orthirdclick.
4. To unlock, slowly pull until the clicking stops, and let it retract until the Hose Stopper hits the Hose Guide.
CAUTION: Grasp Hose to maintain a slow, controlled rewind and avoid damage to the Hose Reel.
5. Attachacoupler(soldseparately)toyouraircompressorhoseandapplythreadsealtapetotheInletttingontheReel.Connect
thecouplertotheInlettting.
6. Connect your air tool to the other end of the Hose using another coupler and thread seal tape.
7. Follow all instructions from the air tool and compressor for set up and use.
8. WhennishedusingtheHose,disconnecttheairtoolandretractthehose.WipetheHoseReelcleanwithadrycloth.
To prevent serious injury from tool failure do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs,
have the problem corrected before further use
Check out the collection of air tools & compressors we offer.
Feel the difference with Performance Tool.
