Philips Avent SCD620 Bedienungsanleitung

9 1087

English 6

Latviešu 30

Lietuviškai 54

Polski 78

Română 102

Slovenščina 127

Slovensky 150

Srpski 174

Ελληνικα 198

English

Introduction

Congratulations on your purchase and welcome to Philips Avent! To fully

benefit from the support that Philips Avent offers, register your product at

www.philips.com/welcome.

The Philips Avent video baby monitor provides you with round-the-clock

support and it allows you to see your baby day and night from anywhere in

the house. The latest digital technology guarantees clear sound and the

clearest image of your baby. This gives you an additional sense of security

without entering your baby’s room and disturbing its sleep.

General description

1 Parent unit

2 Display

3 ECO light

4 Battery status light

5 Link light

6 Speaker

7 Control button (menu navigation/volume/brightness)

8 Sensitivity button

9 Lullaby button

10 Talk-back button

11 Socket for small plug

12 Mode button

13 On/off button

14 Antenna

15 Belt clip

16 Baby unit

17 Camera

18 Lullaby on/off button

19 On/off slide

20 Antenna

21 Speaker

22 Socket for small plug

23 Wall mounting holes

24 Adapter (2x)

25 Screws

Important safety information

Read this important information carefully before you use the appliance and

save it for future reference.

IMPORTANT

This baby monitor is intended as an aid. It is not a substitute for

responsible and proper adult supervision and should not be used as such.

Never leave your baby alone in your home. Always make sure there is

someone present to look after the baby and take care of its needs.

6English

Disclaimer

Please note that you use this baby monitor at your own risk. Koninklijke

Philips N.V. and its subsidiary companies are not responsible for the

operation of this baby monitor or your use of it and therefore do not accept

any liability in connection with your use of this baby monitor.

Danger

-Never immerse any part of the baby monitor in water or any other liquid.

Do not place the appliance where water or any other liquid can drip or

splash onto it. Never use the baby monitor in moist places or close to

water.

-Never put any object on top of the baby monitor and do not cover it. Do

not block any ventilation openings. Install according to the

manufacturer’s instructions.

English

-Cords present a potential strangulation hazard. Keep cords out of the

reach of children (more than 1 meter/3.5 feet away). Never place the

baby monitor inside the baby’s bed or playpen.

Warning

-Check if the voltage indicated on the adapter corresponds to the local

mains voltage before you connect the appliance.

-Do not modify or cut off any part of the adapter and its cord, as this

causes a hazardous situation.

-Only use the adapter supplied.

-If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

-This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without supervision.

-Protect the mains cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

appliance.

-Make sure that you place the baby monitor in such a way that its cord

does not obstruct a doorway or passage. If you place the baby monitor

on a table or low cabinet, do not let the mains cord hang over the edge

of the table or cabinet. Make sure the cord does not lie on the floor

where it presents a tripping hazard.

-Keep the packaging materials (plastic bags, cardboard buffers, etc.) out

of the reach of children, as they are not a toy.

-To prevent electric shock, do not open the housing of the baby unit or

parent unit.

Caution

-Use the appliance at a temperature between 0°C (32°F) and 40°C (104°F).

-Do not install the appliance near any heat sources such as radiators, heat

registers, stoves or other apparatus (including amplifiers) that produce

heat.

-Make sure that your hands are dry when you handle adapters, plugs and

the mains cord.

-All required markings on the baby unit, parent unit and power adapter

are located on the bottom of the baby unit, parent unit and power

adapter.

Compliance with standards

8English

-This product complies with the radio interference requirements of the

European Community.

-Philips Consumer Lifestyle hereby declares that this baby monitor is in

compliance with the essential requirements and other relevant provisions

of Directive 1999/5/EC. A copy of the EC Declaration of Conformity

(DoC) is available online at www.philips.com/support.

Electromagnetic fields (EMF)

-This Philips appliance complies with all applicable standards and

regulations regarding exposure to electromagnetic fields.

Preparing for use

Baby unit

Put the power adapter in the baby unit and the adapter in the wall socket.

Parent unit

The parent unit runs on a built-in rechargeable Li-ion battery.

Follow the below steps to charge the parent unit:

1Put the power adapter in the parent unit and put the adapter in the wall

socket.

-The battery status light turns orange to indicate that the appliance is

charging.

20°CEco 1

-When the battery is fully charged, the battery status light lights up

green continuously.

English

10 hrs=3 hrs

-When you charge the parent unit for 3 hours, it can be used cordlessly for

approx. 10 hours.

-If the parent unit is switched on during charging, charging takes

approximately twice as long.

20°CEco 1

-When the rechargeable battery of the parent unit is almost empty, the

battery status light turns red and the parent unit beeps.

-If the battery is completely empty and the parent unit it not connected to

the mains, the parent unit automatically switches off and loses contact

with the baby unit.

Note: The built in rechargeable battery cannot be removed from the

product.

Note: The battery gradually and very slowly discharges, even when the

parent unit is switched off.

Tip: To save battery, switch off the parent unit when you do not use it.

Note: We advise you to keep the parent unit connected to the mains during

the whole night. If the battery of the parent unit runs low during the night,

the parent unit beeps and this may wake you up.

Using the baby monitor

Linking parent unit and baby unit

1Push the on/off slide on the baby unit upwards to the ON position.

2When the baby unit is on, the power-on light on the baby unit lights up

green.

Note: The power-on light on the baby unit always lights up green, even

when there is no connection with the parent unit.

10 English

>2.5m/8.2ft

3Make sure that the parent unit and the baby unit are at least 2.5 meters/

8.2 feet away from each other to avoid acoustic feedback.

4Press the on/off button on the parent unit to switch on the parent unit.

20°CEco 1

-The display goes on, the linking image appears on the display and the

link light lights up red. The parent unit starts to search for the baby

unit.

20°CEco 1

-When the parent unit and baby unit are linked, the link light lights up

green on the parent unit and one or more bars appear on the display.

20°CEco 1

Note: It takes less than 10 seconds to establish the link between the

parent unit and the baby unit.

When the baby unit is turned off, the parent unit will show the out of

range image. Make sure that the baby unit is switched on.

-If no connection has been established, the link light turns red, the

parent unit beeps three short beeps every 20 seconds and the out-of-

range image appears on the display.

English

Positioning the baby monitor

Warning: The cord of the baby unit presents a potential

strangulation hazard. Make sure that the baby unit and its cord

are at least 1 meter / 3.5 feet away from your baby. Never place

the baby monitor inside the baby’s bed or playpen.

>1-1.5m/3.5-5ft

1For optimal sound detection, make sure that the baby unit is no further

than 1.5 meter/ 5 feet away from the baby. Make sure that the baby unit

is at least 1 meter/ 3.5 feet away from the baby because of potential

strangulation hazard.

>2.5m/8.2ft

2Place the parent unit within the operating range of the baby unit. Make

sure it is at least 2.5 meters / 8.2 feet away from the baby unit to avoid

acoustic feedback.

Note: If you use a cordless phone, wireless video, Wi-Fi network,

microwave oven or Bluetooth on 2.4GHz and you experience

interference on either the parent unit or baby unit, move the parent unit

until there is no more interference.I

3There are two ways to position the baby unit

a Place the baby unit on a stable, level and horizontal surface.

b Mount the baby unit to the wall with the screws supplied.

Tip: The wall mount template (see 'Wall mount') to mount the baby unit

to the wall can be found at the end of this user manual.

Tip: Use the provided template to mark the exact location of the screw

holes on the wall.

Tip: Position the baby unit at a higher level to get a good overview of the

baby’s bed or playpen.

12 English

Andere Handbücher für Avent SCD620

Inhaltsverzeichnis

Sprachen:

Andere Philips Babyphone Handbücher

Philips

Philips AVENT SCD831 Bedienungsanleitung

Philips

Philips AVENT SCD603/01 Bedienungsanleitung

Philips

Philips SBCSC467/00 Bedienungsanleitung

Philips

Philips SCD603 Bedienungsanleitung

Philips

Philips SCD860/05 Betriebsanleitung

Philips

Philips SCD361 Bedienungsanleitung

Philips

Philips B120/37 Bedienungsanleitung

Philips

Philips AVENT SCD501/01 Bedienungsanleitung

Philips

Philips SBCSC763 Bedienungsanleitung

Philips

Philips SBCSC762 Bedienungsanleitung

Philips

Philips SCD603 Bedienungsanleitung

Philips

Philips SBC SC 368 Bedienungsanleitung

Philips

Philips AVENT SCD835 Bedienungsanleitung

Philips

Philips SCX464/00 Bedienungsanleitung

Philips

Philips AVENT SCD525 Bedienungsanleitung

Philips

Philips SBC SC465/05 Bedienungsanleitung

Philips

Philips Avent SCD620 Bedienungsanleitung

Philips

Philips B120 Bedienungsanleitung

Philips

Philips SCD560 Bedienungsanleitung

Philips

Philips AVENT SCD501 Bedienungsanleitung

Philips

Philips AVENT SCD510 Bedienungsanleitung

Philips

Philips SCD506/05 Bedienungsanleitung

Philips

Philips SCD589 Bedienungsanleitung

Philips

Philips AVENT SCD831 Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Motorola

Motorola MBP15 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung

Ivation

Ivation Wireless Monitoring System Bedienungsanleitung

Levana

Levana Lila Bedienungsanleitung