Philips SCD603 Bedienungsanleitung

EN User manual 3

SCD603

Always here to help you

www.philips.com/welcome

1 Introduction

Congratulations on your purchase and welcome

to Philips AVENT! To fully benet from the

support that Philips AVENT offers, register your

product at www.philips.com/welcome.

The Philips AVENT video monitor provides you

with round-the-clock support and it allows you to

see your baby day and night from anywhere in the

house.The latest digital technology guarantees clear

sound and the clearest image of your baby.This

gives you an additional sense of security without

entering your baby’s room and disturbing its sleep.

2 General description

I Parent unit

1 Antenna

2 Battery/power-on light

3 Voice activation light

4 Brightness adjustment buttons

5 Video display - icon explanation

a. Parent unit and baby unit are not linked

b. Battery status

c. Signal strength symbol

d. Volume level bar

e. Brightness level bar

f. Lullaby numbers

g. ‘Repeat lullaby’ symbol

h. Voice activation symbol

i. Volume muted symbol

6 Volume up and down buttons

7 Sound level lights

8 Socket for appliance plug

9 Loudspeaker

10 Battery compartment lid

11 Belt clip/stand

12 On/off button

13 Voice activation button

14 Lullaby play/stop button

15 Next lullaby button

16 Rechargeable battery

17 Adapter

18 Appliance plug

Table of contents

1 Introduction 3

2 General description 3

3 Preparing for use 4

3.1 Baby unit 4

3.2 Parent unit 5

4 Using the appliance 6

4.1 Positioning the baby monitor 7

5 Features 9

5.1 Adjusting loudspeaker volume 9

5.2 Adjusting display brightness 9

5.3 Sound level lights 10

5.4 Voice activation 10

5.5 Nightlight 10

5.6 Lullaby function 11

5.7 Out-of-range alert 12

5.8 Night vision 12

5.9 Belt clip/stand 12

5.10 Auto mute feature 12

5.11 Reset feature 12

6 Cleaning and maintenance 13

7 Storage 13

8 Ordering accessories 13

9 Assistance 13

10 Warranty 13

11 Frequently asked questions 14

ENGLISH

3.1.2 Placing the non-rechargeable batteries

In case of a power failure, the baby unit can run

on four 1.5V R6 AAA alkaline batteries (not included).

Do not use rechargeable batteries.The baby

unit does not have a charging function and

rechargeable batteries discharge slowly when

they are not in use.

BWarning:

Unplug the baby unit and make sure your hands

and the unit are dry when you insert non-

rechargeable batteries.

DNote:

The baby unit has an operating time of 3 hours

when you use it on non-rechargeable alkaline

batteries with the night light turned on.

1 Remove the battery compartment lid.

2 Insert four non-rechargeable alkaline batteries.

DNote:

Make sure the + and - poles point in the

right direction.

II Baby unit

1 Antenna

2 Power-on light

3 Microphone

4 Lens

5 Loudspeaker

6 Base

7 Nightlight and nightlight button

8 Wall-mounting holes

9 Battery compartment lid

10 Socket for appliance plug

11 On/off switch

12 Appliance plug

13 Adapter

3 Preparing for use

IMPORTANT: Read the important safety

instructions carefully before you use the

video baby monitor and keep them for

future reference.

3.1 Baby unit

Always operate the baby unit connected to an

electrical outlet.To guarantee automatic power

backup in case of a power failure, we advise you

to insert non-rechargeable batteries.

3.1.1 Connecting the baby unit

1 Put the appliance plug in the baby unit and

insert the adapter into an electrical outlet.

1 Slide down the battery compartment lid to

remove it.

2 Insert the rechargeable battery.

DNote:

Make sure the + and - poles point in the

right direction.

3 Reattach the lid.

3.2 Parent unit

3.2.1 Operation on rechargeable battery

BWarning:

Unplug the parent unit and make sure your

hands and the unit are dry when you insert the

rechargeable battery.

•The parent unit comes with a rechargeable

Li-ion polymer 1100mAh battery.

•Charge the parent unit before you use it

for the rst time or when the parent unit

indicates that the battery is low.

•The battery is low when the empty battery

symbol ashes on the video display and the

battery/power-on light on the parent unit

ashes red.

DNote:

If the battery is completely empty, the parent unit

automatically turns off and loses contact with the

baby unit.

ENGLISH

DNote:

•When the parent unit is charged for

the rst time, the operating time is less

than 7 hours.The rechargeable battery

only reaches its full capacity after four

discharging and charging cycles.

•The battery gradually discharges, even

when the parent unit is turned off.

4 Using the appliance

1 Place the parent unit and the baby unit in the

same room to test the connection.

Make sure the baby unit is at least 1.5 meters

(5 feet) away from the parent unit.

2 Set the on/off switch on the baby unit to

the ON position.

•The green power-on light goes on.

>1.5m / 5ft

4 Insert the appliance plug into the parent unit

and insert the adapter into an electrical outlet.

•The battery/power-on light on the parent

unit lights up green and the animated

battery charging image appears at the top

of the video display.

•When the battery is fully charged, the

battery symbol at the top of the video

display is full.

•When you charge the parent unit for

the rst time or after a long period

of disuse, turn it off and let it charge

continuously for at least 4 hours.

•Charging normally takes 2.5 hours, but

it takes longer when the parent unit is

turned on during charging.To keep the

charging time as short as possible,

turn off the parent unit during charging.

•When the rechargeable battery is fully

charged, the parent unit can be used

cordlessly for approx. 7 hours if it is

in voice activation mode. If the video

display is on continuously, the parent unit

can be used cordlessly at default setting

for approx. 5.5 hours.

ETip:

Find out what the best position is for

the parent unit by looking at the signal

strength symbol.The number of stripes

indicates the quality of the connection.

•If no connection can be established, the

parent unit beeps and the out-of-range

image appears on the display.

4.1 Positioning the baby

monitor

BWarning:

Keep the baby unit out of the reach of the baby.

Never place the baby unit inside or mount it on

the baby’s bed or playpen.

DNote:

If you use a cordless phone, wireless video,Wi-Fi

network, microwave oven or Bluetooth on 2.4Ghz

and you experience interference on either the

parent unit or baby unit, move the parent unit

further away until there is no more interference.

1 For optimal sound detection, place the baby

unit at least 1 meter (3.5 feet) away from your

baby, but no further than 1.5 meters

(5 feet) away.

>1-1.5m / 3.5-5ft

DNote:

The power-on light always lights up green,

even when there is no connection with

the parent unit.

3 Press and hold the on/off button on the

parent unit.

•The video display goes on and the linking

image appears on the display.

•When a connection has been established,

the baby is shown on the video display

and the signal strength symbol appears.

1.5s

ENGLISH

4 Place the parent unit within the operating

range of the baby unit. Make sure it is at least

1.5 meters (5 feet) away from the baby unit

to avoid acoustic feedback.

For more information on the operating range,

see section ‘Operating range’ below.

4.1.1 Operating range

The operating range of the baby monitor is

150 meters (490 feet) in open air and line of sight.

Indoors the operating range is up to 30 meters

(98 feet). Depending on the surroundings and

other disturbing factors, this range may be smaller.

For wet and moist materials, the range loss may

be up to 100%.

Dry materials Material

thickness

Loss of

range

Wood, plaster,

cardboard, glass

(without metal, wires

or lead)

< 30cm

(12in)

0-10%

Brick, plywood < 30cm

(12in)

5-35%

Reinforced concrete < 30cm

(12in)

30-100%

Metal grilles or bars < 1cm (0.4in) 90-100%

Metal or aluminum

sheets

< 1cm (0.4in) 100%

>1.5m / 5ft

2 There are two ways to position the baby unit:

1 Place the baby unit on a stable, level and

horizontal surface.

2 Mount the baby unit to the wall as shown

in the gure with the screws supplied.

ETip:

•Use the provided template, to mark the exact

location of the screw holes on the wall.

•Position the baby unit at a higher level to get

a good overview of the baby’s bed or playpen.

3 Adjust the baby unit in a way that ensures the

best visibility of your baby.

BWarning:

Do not position the baby unit with the

microphone pointing too far down, as this

may prevent the microphone from picking up

sounds properly.

5.2 Adjusting display brightness

You can adjust the display brightness of the parent

unit to the level you prefer.

1 Press the brightness adjustment buttons on

the parent unit to adjust the brightness of the

video display.

•The display brightness bar appears on

the display to show the selected display

brightness.

DNote:

If the brightness is set to a high level, the parent

unit consumes more power.

5 Features

5.1 Adjusting loudspeaker

volume

You can adjust the loudspeaker volume of the

parent unit to the level you prefer.

1 Press the volume up or down button to adjust

the volume.

•The volume bar appears on the display to

show the selected volume.

DNote:

If the volume is set to a high level, the parent unit

consumes more power.

ENGLISH

•The voice activation light on the parent

unit goes on and the voice activation

image appears on the video display.

•When the baby unit detects a sound,

the video display on the parent unit

automatically goes on to show the baby.

When no new sound is detected for 20

seconds, the video display goes out again.

2 To deactivate the voice activation mode, press

the voice activation button on the parent unit

again.The voice activation light goes out and the

voice activation off image appears on the display.

5.5 Nightlight

1 Press the nightlight button on the base of the

baby unit to turn on the nightlight.

5.3 Sound level lights

The parent unit continuously monitors the sound

level in your baby’s room and the sound level

lights let you know if there is any activity. If your

baby cries, the blue sound level lights light up on

the parent unit.

•As long as no sound is detected, the sound

level lights are out.

•When the baby unit picks up a sound, one or

more sound level lights on the parent unit go

on.The number of lights that go on depends

on the loudness of the sound picked up by

the baby unit.The sound level lights also

go on when the parent unit is set to a low

volume or when the voice activation mode is

activated (see section ‘Voice activation’ below).

5.4 Voice activation

The parent unit continuously monitors the

sound level in your baby´s room.When the voice

activation mode is activated, the video display only

turns on when the baby unit picks up a sound.

As long as no sound is detected, the video display

is off to save power.

1 To activate the voice activation mode, press

the voice activation button on the parent unit.

Andere Handbücher für SCD603

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Philips Babyphone Handbücher

Philips

Philips SCD588/54 Bedienungsanleitung

Philips

Philips AVENT SCD510 Bedienungsanleitung

Philips

Philips AVENT SCD501/01 Bedienungsanleitung

Philips

Philips Analogue monitor SCD450 Bedienungsanleitung

Philips

Philips AVENT SCD860 Bedienungsanleitung

Philips

Philips SBC SC467 Bedienungsanleitung

Philips

Philips SCD450/79 Bedienungsanleitung

Philips

Philips AVENT SCD835 Bedienungsanleitung

Philips

Philips AVENT SCD831 Bedienungsanleitung

Philips

Philips SC465 Bedienungsanleitung

Philips

Philips SKM7489NC/00 Bedienungsanleitung

Philips

Philips SCD580 Bedienungsanleitung

Philips

Philips Avent DECT baby monitor SCD520 Bedienungsanleitung

Philips

Philips SBCSC490/00 Bedienungsanleitung

Philips

Philips SBCSC765 Bedienungsanleitung

Philips

Philips AVENT SCD620/05 Bedienungsanleitung

Philips

Philips SCD603/00 Bedienungsanleitung

Philips

Philips SBCSC464 Bedienungsanleitung

Philips

Philips Avent DECT baby SCD498 Bedienungsanleitung

Philips

Philips AVENT SCD486H1 Bedienungsanleitung

Philips

Philips Avent SCD730 Bedienungsanleitung

Philips

Philips SCD 469 Bedienungsanleitung

Philips

Philips AVENT DECT SCD535/00 Bedienungsanleitung

Philips

Philips SKM7489 NC Bedienungsanleitung

Beliebte Babyphone Handbücher anderer Marken

Motorola

Motorola MBP15 Bedienungsanleitung

Oricom

Oricom Babysense 7 Bedienungsanleitung

Levana

Levana TW502 Bedienungsanleitung

Luvion

Luvion Essential Bedienungsanleitung

NUK

NUK Eco Control Video Display 550VD Bedienungsanleitung

Lorex

Lorex sweet peek mini Bedienungsanleitung

Mondevices

Mondevices MonBaby 2 Bedienungsanleitung

Famidoc

Famidoc FDBB-V2 Bedienungsanleitung

Graco

Graco iMonitor 2797 Bedienungsanleitung

babymoov

babymoov High Care A014001 Bedienungsanleitung

Ramili

Ramili RV1000 Bedienungsanleitung

Swann

Swann SW231-FLO Bedienungsanleitung

Badabulle

Badabulle Baby Online 300 m+ Bedienungsanleitung

Philips AVENT

Philips AVENT SCD526/00 Bedienungsanleitung

Uniden

Uniden Guardian UBR223 Bedienungsanleitung

Summer

Summer Day & Night 28470A Bedienungsanleitung

Ivation

Ivation Wireless Monitoring System Bedienungsanleitung

Levana

Levana Lila Bedienungsanleitung