Philips AVENT scf356 Bedienungsanleitung
SCF356
1
SCF356
ENGLISH 6
ESPAÑOL 18
FRANÇAIS (CANADA) 30
PORTUGUÊS DO BRASIL 43
6
General description (Fig. 1)
1 Baby bottle warmer
2 Progress indicator
3 Settings and on/off knob
4 Defrost setting
5 Milk warming setting 1
6 Milk warming setting 2
7 Milk warming setting 3
8 Baby food warming setting
9 On/off button
IMPORTANT
SAFEGUARDS
To fully benet from the support that Philips offers, register your
appliance at www.philips.com/welcome.
Read this user manual carefully before you use the baby bottle warmer
and save it for future reference.
Warning
- Read all instructions.
- Do not use outdoors.
- To protect against re, electric shock and injury to persons do not
immerse the cord, plug or appliance in water or other liquid.
- Do not let cord hang over the edge of table or counter, or touch hot
surfaces. Excess cord can be stored in the base of the baby bottle
warmer.
- This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to t
into a polarized outlet only one way. If the plug does not t fully into
the outlet, reverse the plug. If it still does not t, contact a qualied
electrician. Do not attempt to modify the plug in any way.
- Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
ENGLISH
- A short power-supply cord should be used to reduce the risk
resulting from becoming entangled in or tripping over a longer cord.
Extension cords are available and may be used if care is exercised in
their use. If an extension cord is used, the marked electrical rating of
the cord set or extension cord should be at least as great as the
electrical rating of the appliance, and the cord should be arranged so
that it will not drape over the countertop or tabletop where it can
be pulled on by children or tripped over unintentionally.
- Do not operate any appliance with a damaged cord or plug or after
the appliance malfunctions, or has been damaged in any manner.
Return appliance to the nearest authorized service facility for
examination, repair or adjustment.
- The use of accessory attachments not recommended by the
appliance manufacturer may cause injuries.
- Do not place the appliance on or near a hot gas or electric burner, or
in a heated oven.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Close supervision is necessary when any appliance is used by or near
children.
- Keep the appliance and its cord out of reach of children.
- Do not preheat the appliance.
- Always place a fully assembled bottle with cap in the baby bottle
warmer before you add water.
- Make sure you add water before you switch on the baby bottle warmer.
- Hot water can cause serious burns. Be careful when the baby bottle
warmer contains hot water.
- Extreme caution must be used when moving an appliance containing
hot oil or other hot liquids.
- Do not touch hot surfaces. Use handles or knobs. The accessible
surfaces may become hot during use.
- Do not move the appliance when it contains hot water.
ENGLISH 7
- Do not place the appliance on an enclosed surface (e.g. a serving
tray), as this could cause water to accumulate under the appliance,
resulting in a hazardous situation.
- Before serving be sure the food is at safe temperature.
- Before serving, unplug the cord from the wall outlet and dish. Do not
leave the cord within child’s reach.
- Always press the on/off button to “off” before you remove the plug
from the wall outlet.
Caution
- This appliance is intended to be used in household and similar
applications such as farm houses, bed and breakfast type
environments, staff kitchen areas in shops, ofces and other working
environments, and by clients in hotels, motels and other residential
type environments.
- Unplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts, and before cleaning the
appliance.
- Follow the descaling instructions to avoid irreparable damage.
- Do not try to open or repair the appliance yourself. You can contact
the Philips Consumer Care Centre in your country
(see www.philips.com/support).
- Do not use appliance for other than intended use.
SAVE THESE
INSTRUCTIONS.
You can nd the production date code YYWW in the cord storage
compartment in the base of the baby bottle warmer.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic elds.
ENGLISH8
Using the baby bottle warmer
With this baby bottle warmer, you can safely warm and defrost milk in
Philips Avent feeding bottles and milk or baby food in containers.
The baby bottle warmer helps to preserve the valuable nutrients and
vitamins in breast milk because it never overheats the milk. If milk
becomes too warm, nutrients and vitamins are damaged. To help preserve
the quality of your breast milk, it is important to heat the milk in a safe
and controlled way. The baby bottle warmer is designed to warm gently
and evenly and to avoid hot spots, as the milk circulates during warming.
The built-in sensor tracks and controls the milk temperature, to avoid
overheating at all times.
Note: Philips Avent breast milk bags and Philips Avent 2oz/60ml bottles
cannot be used in this baby bottle warmer.
Explanation of settings
- You can choose between the following settings: (Fig. 2)
Defrost setting: To defrost a bottle or container with frozen milk or frozen
baby food. No warming occurs.
Milk warming settings: Select one of these settings when you want to
warm a bottle of milk to a safe temperature. Setting 2 warms your
milk to approximately body temperature. Setting 1 warms your milk
to a slightly lower temperature and setting 3 warms your milk to a
slightly higher temperature.
Baby food warming setting: Select this setting when you want to warm a
container or jar with baby food.
Using the baby bottle warmer to warm milk
1 Put the mains plug in the electrical outlet (Fig. 3).
2 Place a bottle centrally in the baby bottle warmer (Fig. 4).
Note:To warm milk in a milk storage container, follow the same steps as
indicated for warming milk in a bottle.
ENGLISH 9
3 Fill the baby bottle warmer with the same amount of drinking
water as the amount of milk you want to warm up (for example, to
warm up 125ml/4oz of milk, you need to use 125ml/4oz of drinking
water). If you want to heat up a large amount of milk (>180ml/6oz),
the maximum water level is approximately 1cm/0.4 inches under
the rim of the baby bottle warmer (which corresponds to adding
160ml/4.5oz of drinking water).An accurate water level ensures
correct warming performance. (Fig. 5)
4 Select the desired setting (Fig. 6).
Note: Experience teaches that babies may have a preference for a specic
milk temperature.This can be due to personal preference or external factors
(e.g. environment temperature).All three settings ensure that the milk is
warmed to a safe temperature which is comfortable for your child and helps
to preserve the nutrients and vitamins in the milk.
5 Press the on/off button to turn on the appliance.The light in the
button lights up to indicate that the baby bottle warmer is on (Fig. 7).
Note:The baby bottle warmer starts warming up right after you press the button.
6 Theprogressindicatorstartstollupgraduallywithwhitelightto
show the progress of the milk warming process (Fig. 8).
Note:The progress indicator shows the progress of the milk warming process.
The progress indicator starts ashing when the appliance is on. When the rst
warming phase has been completed, the bottom segment lights up continuously
and the next segment starts ashing to show that the second warming phase is
in progress.These steps continue until the third warming phase has been
completed.Then the entire progress indicator lights up continuously.
Note: During the warming process, the milk circulates to ensure even
warming. It takes about 10 minutes to warm 90ml/3oz of room-temperature
milk. It takes slightly longer to warm cold milk or a large amount of milk.
Caution: Do not take the bottle out of the baby bottle warmer while
theprogressindicatorisashing.
ENGLISH10
Andere Handbücher für AVENT scf356
12
Inhaltsverzeichnis
Sprachen:
Andere Philips Flaschenwärmer Handbücher
Philips
Philips SBC SC215 Bedienungsanleitung
Philips
Philips AVENT scf356 Bedienungsanleitung
Philips
Philips AVENT scf356 Bedienungsanleitung
Philips
Philips SCF355 Bedienungsanleitung
Philips
Philips Avent SCH820/00 Bedienungsanleitung
Philips
Philips AVENT SCF358 Bedienungsanleitung
Philips
Philips SCF355/03 Bedienungsanleitung
Philips
Philips SCF255/52 Bedienungsanleitung
Philips
Philips SCF256 Bedienungsanleitung
Philips
Philips HD4331/01 Bedienungsanleitung
Philips
Philips SCF355 Bedienungsanleitung
Philips
Philips SCF282/22 Bedienungsanleitung
Philips
Philips SBCSC250/00 Bedienungsanleitung
Philips
Philips AVENT SCF358 Bedienungsanleitung
Philips
Philips SCF287 Bedienungsanleitung
Philips
Philips SCF355 Bedienungsanleitung
Philips
Philips SCF355 Bedienungsanleitung
Philips
Philips AVENT scf356 Bedienungsanleitung
Philips
Philips SCF355 Bedienungsanleitung
Philips
Philips AVENT SCF358 Bedienungsanleitung
