Philips FC9122 Bedienungsanleitung

ServiceManual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification

Specialist Vacuum cleaner

FC9122

04/02

PRODUCT INFORMATION

- This product meets the requirements regarding

interference suppression on radio and TV.

- After the product has been repaired, it should function

properly and has to meet the safety requirements as

officially laid down at this moment.

TECHNICAL INFORMATION

- Colour /A : Green frost

- Maximum air displacement : 38 l/sec.

- Maximum vacuum water column : 310 cm

- Power consumption (IEC) 230 V : 1800 W

- Duststorage capacity : 3 L

- Type number dustbag : FC8021

- Cord length (depends on version) : 7 metres

- Filter system : Paper dustbag

: Exhaust AFS air filter

: Motor inlet filter

- Dimensions of cleaner : 460 x 315 x 270 mm

- Dimensions of packaging : 595 x 395 x 295 mm

- Net weight : 5.88 kg

- Gross weight : 9.135 kg

OPTIONAL (accessories)

- FC8021 S-bags

- FC8022 Clinic S-bags

- FC8023 Anti - odour S-bags

- FC8025 S-fresh perfume

- FC8030 AFS-filter

- FC8031 HEPA Air Filter

- FC8034 Upgrate kit Active Carbon Filter

- FC8042 Polishing nozzle

- FC8043 Turbo brush nozzle

DISASSEMBLY- AND RE-ASSEMBLY ADVISE

- Open the appliance, first remove

the exhaust filter grille (item 20),

and then remove the 2 screws -

Cof the switch control panel

(item 15).

- Undo and remove the 9 screws -

Cin the upper housing (item 8).

You will require a screwdriver with

a 14.5 cm-long shank for this.

Screwdriver 4322 009 08490 for

T15 can be used.

- The component configuration shown in the exploded view

may differ in case of specific versions. The components are

distinguished by means of code numbers.

- When the repair is finished, check whether all functions of

the appliance work properly.

- To disassemble the cord winder, use TORX screwdriver no.

T10, which is one of a set consisting of T20; T15; T10; T9;

T8; T7 and T6 (code number 4822 395 50145).

C2x

C9x

FC9122 /A

REPAIR INSTRUCTION

- Item 8 Spare part is standard

supplied without a hole, you

must drill a hole 2 mm dia, so

the air can reach the sensor on

the PCB via the pressure tube.

- Item 22 Replace the HEPA filter

as soon as the pilot light of the

filterfull indicator goes on.

- Item 4, cotton dustbag, is used in countries in which paper

dustbags are not available.

- If the reel half spring unit is replaced, shaft Amust be lubri-

cated with silicone grease. Do not apply any silicone grease

to or spill any grease on terminals (43) or conductors (42).

- Item 40 is provided with a long cord-winder spring, but

both long and short cords can be used in combination with

this spring. (L = 9.3 m)

- Depending on the original cord, the spare cord must be

shortened to the length of the original cord.

- The cord winder spring must be tensioned to the maximum

level and then be rewound approx. 1.5 turn

- Item 13, air valve, opens to cool the motor if the air

displacement is too low or if the airflow is blocked.

- To adjust the telescopic tube (item 59) to the required

length, push the adjustment collar in the direction of the

arrow while sliding the top section of the telescopic tube

into or out of the lower section.

- If the function of the electronic control unit (item 12) is

not required, the Triac must be short-circuited in the

manner shown in the circuit diagram.

- When the vacuum cleaner is used to suck up fine dust the

pores of the dustbag may become clogged, causing the

passage of air through the dustbag to become obstructed.

As a result, the dustbag-full indicator will indicate that the

dustbag needs to be replaced, eventhough the dustbag is not

full at all.

- To replace the side brushes (item 63a), the nozzle must be

switched as used on hard floors.

- Item 72, sealing ring must be replaced if appliance whistles.

- Due to introduction of a new switch (item 11) 0320

onwards, which is not interchangable with the old switch

soldered on the PCB (item 12).

- The switch lever assy (item 11a) is also modified.

To recognize the switches:

Old New

∅13 mm ∅10 mm

To replace the knobs:

New spares are:

11 Switch soldered version - 4322 006 50600

11a Switch lever assy - 4322 009 08980

parts of 15 Switch and Cord winder knob - 4322 009 09000

ELECTRICAL DIAGRAM

MOTOR

POWER

MODULE

Black

Blue

Brown

CORD WINDER

Short-circuit

Triac

Ø 2mm

2-6

FC9122 /A

PARTS LIST

3-6

Pos Service code Description

11a

13a

13b

20a

4322 009 08740

4322 003 22130

4322 003 22180

8838 021 00000

4322 004 93290

8838 022 01010

4322 003 18300

4322 001 73310

4322 005 12550

4322 003 22080

4322 003 22150

4322 000 37300

4322 009 07040

4322 006 21480

4322 006 50600

4322 009 08420

4322 009 08980

4322 006 22570

4322 005 12200

4322 005 12210

4322 003 22110

4322 009 08750

4322 003 22050

4322 003 22120

4322 000 37450

4322 005 14690

4322 009 08760

4322 005 15150

4322 004 92920

4322 001 73280

4322 003 18000

4322 000 37420

4322 000 37430

4322 003 22100

4322 003 18910

not available

4322 003 22070

4322 001 73300

4322 003 18040

4322 003 18010

Dust cover Green frost

Dust cover ﬂint grey

Dustbag holder ﬂint grey

S-paper dustbags FC8021

Cotton dustbag

S-clinic dustbag FC8022

Cordwinder lever

Sealing rim

Dustbag detector

Upper housing ﬂint grey

Clamp upper/lower housing ﬂ. grey

Triple ﬁlter

Grill + triple ﬁlter

Switch soldered version

Switch sold. vers. 0320 onwards

Switch lever assy

Switch lever assy 0320 onwards

PCB FFI 230V

Dustbag full indicator

Air valve

Handle ﬂint grey

Panel slide FFI Green frost

Lower housing ﬂint grey

Handle lock ﬂint grey

Silencer 4 wall

Caster assy (standard) grey

Exhaust grille Green frost

Cilinder assy

HEPA air ﬁlter FC8031

Filter sealing

S-class sealing

Silencer 1 wall

Silencer 2 bottom

Cord outlet ﬂint grey

Rear wheel lock red

Receipt. housing A.C.

Rear wheel ﬂint grey

Motor buffer back

Inlet sealing

Motor cap top

Pos Service code Description

63a

63b

4322 003 18020

4322 001 73290

4322 009 06430

4322 000 37440

4322 003 18030

4322 009 07940

4322 001 72360

4322 009 07950

4322 009 07970

4322 006 01440

4322 006 01760

4322 006 01680

4322 006 01720

4322 006 01410

4322 006 01670

4322 006 01460

4322 003 18850

4322 005 12720

4322 007 16000

4322 004 22570

4322 003 18870

4322 005 12530

4322 004 22510

4322 001 99120

4322 007 45550

4322 004 22560

4322 004 23080

4322 009 08950

4322 003 21950

4322 003 19110

5322 390 20011

4322 002 82550

2522 200 02018

ANS disc

Motor bufferring front

Motor A1451 - 230 V (standard)

Silencer 3 ans

Motor cap bottom

Reel half spring unit (L = 9m)

Brake tyre

Reel half contact unit

Contact ring plate

Argentina L = 9.3 m

Australia L = 9.3 m

Taiwan L = 6.3 m

U.K. / H.K. L = 9.3 m

Euro 4.8 mm pins L = 9.3 m

Swiss L = 9.3 m

Italy L = 9.3 m

C-bend B1

C-bend B1 hose sw assy

Leaf spring assy

Plumeau assy

Crevice nozzle

Acc. bridge assy

Telesc. tube st. silver complete

Tube bush

Tube spring

Small nozzle

Tri active nozzle

Brush replacement set

Brush switch knob

Sealing ring

Silicon grease for shaft

Screw 3.5 x 12 T10

Screw 3.5 x 18 T15

FC9122 /A

EXPLODED VIEW

13a

13b

20a

11a

4-6

FC9122 /A

EXPLODED VIEW

black

brownblue

44÷49

40 41

5-6

FC9122 /A

EXPLODED VIEW

Argentina

Australia

Taiwan 45

Europe Ø 4.8mm 47

Swiss 48

Italy 49

46U.K. / H.K.

63b

63a

50 72

6-6

Inhaltsverzeichnis

Andere Philips Staubsauger Handbücher

Philips

Philips FC9057/01 Bedienungsanleitung

Philips

Philips 2000 series Bedienungsanleitung

Philips

Philips MiniVac FC6132 Bedienungsanleitung

Philips

Philips FC8715/01 Bedienungsanleitung

Philips

Philips FC6149 Bedienungsanleitung

Philips

Philips FC9179 Bedienungsanleitung

Philips

Philips FC8188/01 Bedienungsanleitung

Philips

Philips FC6141 Bedienungsanleitung

Philips

Philips FC6232/62 Bedienungsanleitung

Philips

Philips FC8920 Bedienungsanleitung

Philips

Philips FC8457 Bedienungsanleitung

Philips

Philips HR6804/89 Bedienungsanleitung

Philips

Philips 2000 series Bedienungsanleitung

Philips

Philips SmallStar FC8286 Bedienungsanleitung

Philips

Philips fc8917 Bedienungsanleitung

Philips

Philips FC8619/01 Bedienungsanleitung

Philips

Philips FC8445/01 Bedienungsanleitung

Philips

Philips Jewel FC9069 Bedienungsanleitung

Philips

Philips Turbo Nozzle FC8043 Bedienungsanleitung

Philips

Philips PowerPro Aqua Bedienungsanleitung

Philips

Philips FC8619 Bedienungsanleitung

Philips

Philips MiniVac FC6132 Bedienungsanleitung

Philips

Philips SilentStar FC9306 Bedienungsanleitung

Philips

Philips FC8148 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung