Phoenix PHOENIXHD3 Bedienungsanleitung
1
PHOENIX HD SCOOTER
PHOENIXHD3 / PHOENIXHD4
OWNER’S MANUAL
2
1. PREFACE AND INTRODUCTION ……..………………………………… 3
2. SAFETY NOTICE…………………………………………………………...….
2.1 Before driving
2.2 While driving
2.3 Labeling
2.4 EMI
4
3.
4.
PARTS INTRODUCTION……………..……………….. …………………….
OPERATION…………………………………………………………………....
4.1 Control panel
4.2 How to operate your scooter
4.3 How to set to freewheel mode
9
10
5. DRIVING ON THE ROAD…………………………………………………….. 15
6. BATTERY CHARGING AND CARE…………………………………….....
6.1 Charging the battery
6.2 Battery
6.3 Replacing batteries
16
7.
INSPECTION AND MAINTENANCE……………………………………..…
7.1 Inspection
7.2 Regular checking record
7.3 Battery and tire
7.4 Storage
7.5 Moving about
7.6 Disassembly
7.7 Assembly
20
8. TROUBLESHOOTING ……………………………..……………..………… 25
9. SPECIFICATION …………….………………………………………..……
…
26
10. WARRANTY………………………………………………………………….....
27
T
T
ABLE OF CONTENT S
3
Please carefully read this owner’s manual before using the vehicle. Improper use of the
vehicle could result in harm, injury or traffic accidents. To ensure that you get the most
your scooter, please read this owner’s manual before using.
♦This owner’s manual includes operation instructions for every aspect of the vehicle,
assembly instructions, as well as instructions for how to deal with possible accidents.
♦The symbols used in this manual are explained overleaf:
Warning Improper usage could result in serious injury or death
Attention Improper usage could lead to injury and/or damage to your
scooter.
Suggestion Follow these instructions to keep your vehicle in a good operating
order.
♦This manual includes a copy of repair and maintenance record chart and warranty
information. Please keep it in a safe place or in the scooter.
♦If someone else uses the scooter, please make sure that you provide him or her with
this owner’s handbook for his or her consideration.
♦As designs change some illustrations and pictures in the manual may not correspond
to the vehicle that you purchased. We reserve the right to make design modifications.
Our Scooters have been designed and manufactured to provide a comfortable and secure
yet affordable solution for some mobility requirements.
1
1
. P R E F A C E A N D I N T R O D U C T I O N
4
2. SAFETY NOTICE
2
2
.1 B EFO R E DRIV I N G
The user needs to be familiar with the usage and operation of this vehicle before driving.
Therefore, please follow the commendations in this safety notice.
The same traffic rules apply to the use of this vehicle as apply to pedestrians
♦For your safety, please follow and adhere to the same traffic laws as pedestrians.
♦Please do not drive your scooter after consuming alcohol or when you are tired.
♦Please be careful when driving your scooter in low light. It has not been designed for
use at night.
♦Be extremely cautions when driving you scooter in busy areas or in shopping malls.
♦Ride on the pavement, single carriage roads, or pedestrian areas only. Never ride on
motorways or dual carriageways.
♦Be aware of traffic when crossing or using roads.
Practice operating your vehicle
Before using the scooter in busy or potentially dangerous areas, familiarize yourself
with the operation of your scooter. Please practice in a wide and open area like a park.
In order to avoid accidents with your scooter whilst driving, please bear in mind
driving motions, such as accelerating, stopping, turning, reversing, up-and down
ramps.
♦Please turn the speed dial to minimum value for your initial practice.
♦Be sure someone accompanies you for safety when driving on the roads for the first
time.
♦Only use higher speed setting when you are confident that you can easily operate
and control your scooter.
The Scooter is only to be used by one person at a time
Do not carry passengers on your scooter (including children)
Do not use this vehicle to carry or haul goods
♦The maximum weight that can be carried is 160kg / 350 lbs (including occupant and
any goods).Refer to “MAX LOAD WEIGHT” in “9. SPECIFICATION”
♦Maximum loading weight for basket is 3kg (7 lbs).
Please carry out daily inspections.
Refer to the section entitled “DAILY CHECKING”
5
2. SAFETY NOTICE
2.2 WHILE DRIVING
Do not use your vehicle under the circumstances below.
♦On surfaces that are muddy, gravelly, bumpy, narrow, snowed over, icy, or canal
towpaths not guarded by any fence or hedge. Keep away from places where you
might get the wheels stuck.
♦Do not drive at night or when it is raining, snowing, misty, or windy.
♦Do not drive your vehicle in an “S” pattern or make erratic turnings.
♦Do not take the scooter onto escalators.
♦UNDER NO CIRCUMSTANCES SHOULD THE SCOOTER BE USED AS A
SEAT IN A MOTOR VEHICLE (E.G. CARS, BUSES, TRAINS, ETC).
About Mobile Phones and other electrical equipment
♦Do not use a mobile phone or other wireless communication devices while driving.
♦Always switch off the scooter and remove the ignition key before using a mobile
phone.
♦Do not charge the mobile phone or any other electrical devices from your scooter’s
battery.
Automatic Power Shut Down
In order to avoid accidental battery run down, your scooter is equipped with an
automatic power shut down facility. If the scooter is switched on, after remaining
undisturbed for a period of thirty minutes it will automatically turn off. When this
situation occurs, simply switch your scooter off and back on and it will be ready to use
once again.
Ramps, inclines and drops
♦Do not drive onto steep ramps greater than the specified gradient. Refer to the
section entitled “CLIMBING ANGLE” in “9. SPECIFICATION“
♦Always use a low speed setting when ascending or descending a gradient.
♦Do not drive on roads with large drops or potholes. Refer to the section entitled
“MAX. GROUND CLEARANCE” in “9. SPECIFICATION”.
♦Please slow down when driving on roads with inclines.
♦Do not make sudden turns when driving on gravel roads or ramps.
♦Always lean forward when climbing a steep gradient.
♦Do not travel on gradients exceeding those stated on the diagram overleaf.
6
! !$&"!
#!"%$$#
!
2. SAFETY NOTICE
2.3 Labeling
Please carefully read all the labeling on the scooter before drive it. For your future
reminding, do not remove them.
7
2. SAFETY NOTICE
2.4 EMI
This portion of the content will provide the user with basic information that describes
the problems with EMI, known sources of EMI, protective measures either to lessen the
possibility or exposure or to minimize the degree of exposure, and suggested action
should unexpected or erratic movement occur.
Caution: It is very important that you read this information regarding the possible
effects of electromagnetic interference on your electric SCOOTER.
ELECTROMAGNETIC INTERFERENCE (EMI) FROM RADIO WAVE
SOURCES
Powered vehicle may be susceptible to electromagnetic interference (EMI), which is
interfering electromagnetic energy (EM) emitted from sources such as radio stations,
TV stations, amateur radio (HAM) transmitters, two-way radios, and mobile phones.
The interference (from radio wave sources) can cause the powered scooter to release its
brakes, move by itself, or move in unintended directions. It can also permanently
damage the powered scooter’s control system. The intensity of the interfering EM
energy can be measured in volts per meter (V/m). Each powered scooter can resist EMI
up to a certain intensity. This is called its “immunity level”. The higher the immunity
level, the greater the protection. At this time, current technology is capable of
achieving at least a 20 V/m immunity level, which would provide useful protection
from the more common sources of radiated EMI. This powered scooter model as
shipped, with no further modification, has an immunity level of 20 V/m without any
accessories.
There are a number of sources of relatively intense electromagnetic fields in the
everyday environment. Some of these sources are obvious and easy to avoid. Others
are not apparent and exposure is unavoidable. However, we believe that by following
the warning listed below, your risk to EMI will be minimized.
The sources of radiated EMI can be broadly classified into three types:
1. Hand-held portable transceivers ( transmitter -receivers with the antenna mounted
directly on the transmitting unit. Examples include: citizens band (CB) radios,
“walkie talkie”, security, fire, and police transceivers, cellular telephones and other
personal communication devices.
Note: Some mobile telephones and similar transmit signal while they are ON, even
when not being used;
2. Medium-range mobile transceivers, such as those used in police cars, fire trucks,
ambulances and taxis. These usually have the antenna mounted on the outside of the
scooter.
8
2. SAFETY NOTICE
3. Long-range transmitters and transceivers, such as commercial broadcast transmitter
(radio and TV broadcast antenna towers) and amateur (HAM) radios.
Note: Other types of hand-held devices, such as cordless phones, laptop computers,
AM/FM radios, TV sets, CD player, and cassette players, and small
appliances, such as electric shavers and hair dryers, so far as we know, are not
likely to cause EMI problems to your powered scooter.
POWERED VEHICLE ELECTROMAGNETIC INTERFERENCE (EMI)
Because EM energy rapidly becomes more intense as one moves closer to the
transmitting antenna (source), the EM fields from hand-held radio wave sources
(transceivers) are of special concern. It is possible to unintentionally bring high
levels of EM energy very close to the control system of power chair while using
these devices. This can affect powered vehicle movement and braking. Therefore,
the warnings listed below are recommended to prevent possible interference with the
control system of the powered scooter.
WARNINGS
Electromagnetic interference (EMI) from sources such as radio and TV stations,
amateur radio (HAM) transmitters, two-way radios, and mobile phones can affect
powered scooter and motorized scooter. Following the warnings listed below should
reduce the chance of unintended brake release or powered scooter movement which
could result in serious injury.
1. Do not operate hand-held transceivers-receivers), such as citizens band (CB)
radios,
or turn ON personal communication devices, such as cellular phones, while the
powered vehicle is turned ON;
2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid
coming close to them;
3. If unintended movement or brake release occurs, turn the powered vehicle OFF as
soon as it is safe;
4. Be aware that adding accessories or components, or modifying the powered
vehicle,
may make it more susceptible to EMI ( Note: There is no easy way to evaluate
their effect on the overall immunity of the powered scooter).
5. Report all incidents of unintended movement or brake release to the powered
scooter manufacturer, and note whether there is a source of EMI nearby,
IMPORTANT INFORMATION
1. 20 Volts per meter ( V/m) is a generally achievable and useful immunity level
against EMI ( the higher the level, the greater the protection);
2. This product has an immunity level of 20 V/m without any accessories and connected
to it.
9
3. PARTS INTRODUCTION
PARTS DESCRIPTION
1. Control panel
2. Basket
3. Charger Socket
4. Tiller Adjustment Knob
5. Seat
6. Seat Rotation Lever
7. Battery Pack
8. Freewheel Lever
9. Anti-tip wheels
10. Seat Post Knob
11. Seat Height Adjustment
Pin
10
4. OPERATION
4.1 CONTROL PANEL
1. Speed Dial 2. Horn Button
3. Battery Indicator 4. Power Switch
5. Power Eye
4.2 HOW TO OPERATE YOUR SCOOTER
Power switch
♦To switch the power on , turn the key
clockwise in the ignition. The power eye should illuminate.
♦To switch the power off, turn the key anticlockwise. The power eye should switch
off and the key can be removed if required.
Speed Dial
Turn the speed dial to determine the maximum
speed of the scooter. Turn the dial clockwise to
increase the speed setting and turn the dial
anticlockwise to decrease the speed setting.
Moving and Braking
♦Push the right-hand side speed control lever forwards with your right thumb and the
scooter will move forward.
♦Push the left-hand side speed control lever forwards with your left thumb and the
scooter will move backward.
♦To brake, release the speed control lever which will return to neutral and activate
the electromagnetic brake automatically .This will bring the scooter to a prompt
stop.
♦The speed control lever allows you to control the speed of the scooter up to a
maximum speed determined by the Speed Dial .The further the speed control lever
is deflected, the faster the scooter will go.
Horn Button
Press the horn button to sound the horn. Release the button to stop the horn.
Braking
Electro-magnetic brake: Release the speed control lever completely, and the
electromagnetic brake will be activated automatically, and the scooter will stop.
Slowest setting Fastest setting
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Phoenix Roller Handbücher
Beliebte Roller Handbücher anderer Marken
First Choice Mobility
First Choice Mobility Roma Medical Corella S741 Bedienungsanleitung
Carrera
Carrera impel Bedienungsanleitung
Afikim
Afikim Superlight SL-3 Bedienungsanleitung
CareCo
CareCo ZOOM Bedienungsanleitung
Douglas
Douglas Vespa G.S. Bedienungsanleitung
Gazelle
Gazelle with BOSCH System Bedienungsanleitung