Pickering 40-659A Bedienungsanleitung

pickeringtest.com

PXI 8-Bank, 8-Channel 2-Pole Multiplexer 40-659A

ISSUE 1.0 FEB 2019

Supported by

eBIRST

eBIRST switching system test tools simplify switching system fault-

nding by quickly testing the system and graphically identifying the

faulty relay.

For more information go to: pickeringtest.com/ebirst

• High Density Multiplexer With 2A Current

Carrying Capability

• 8 Separate 8-Channel Multiplexer Banks

• 2-Pole Switching

• Operating Speed 3ms Typical per Relay

• Maximum Current 2A Hot or Cold Switching

• Switch up to 300VDC/250VAC and up to 60W

Max Power

• VISA, IVI & Kernel Drivers Supplied for Windows

• Supported by PXI or LXI Chassis

• Supported by

eBIRST

™

• 3 Year Warranty

Model 40-659A is an 8-Bank 8-Channel Multiplexer module with

2-pole switching. It uses high quality electro-mechanical relays and is

suitable for switching signals up to 2A, 300VDC/250VAC.

The 40-659A can be operated as a conventional multiplexer

with break-before-make action when a new channel is selected.

Alternatively, product variants can be supplied that allow multiple

channels to be simultaneously selected.

The 40-659A channel selection congurations have been revised from

the 40-659. The 40-659A modules default to single channel selection

with multiple channel selection variants dened by use of a sufx.

The multiplexer is suitable for applications where two signals are

required to be switched simultaneously, for example send and return

in a telecoms system. It is also suitable for applications where reed

Schematic Diagram for the 40-659A Multiplexer Module

Com2

Com1

1.1

4.2

5.1

5.2

8.2

4.1

2.1

2.2

3.1

3.2

6.1

6.2

7.1

7.2

8.1

1.2

BANK 1

Com2

Com1

1.1

4.2

5.1

5.2

8.2

4.1

2.1

2.2

3.1

3.2

6.1

6.2

7.1

7.2

8.1

1.2

BANK 2

Com2

Com1

1.1

4.2

5.1

5.2

8.2

4.1

2.1

2.2

3.1

3.2

6.1

6.2

7.1

7.2

8.1

1.2

BANK 8

relay based multiplexers do not have sufcient power handling

such as switching medium power AC or DC loads or for slave

switching external relays, contactors and solenoids.

8-Bank, 8-Channel 2-Pole MUX – 40-659A

pickeringtest.com

Speciﬁcations

Switching Speciﬁcation

Switch Type: Electro-mechanical

Contact Type: Palladium-Ruthenium, Gold

Covered Bifurcated

Max Standoff Voltage: 300VDC/250VAC

Max Power:

Max Switch Current:

Max Continuous Carry Current:

Max Pulsed Carry Current

Example (for a single switch path):

62.5VA, 60W from 30V to

220VDC, 30W to 300VDC

(resistive load)

6A for 100ms

(up to 10% duty cycle)

Initial On Path Resistance:

Off Path Resistance:

Minimum Voltage:

Differential Thermal Offset:

<200mΩ

>109Ω

100µV

<10µV

Operate Time: 6ms typical,

3ms for multichannel mode

Expected Life (operations)

Very low power signal load:

Low power load (2W):

Medium power load (30W):

Full power load (60W):

>1x108

>1.5x107 (0.1A 20VDC)

>5x106 (1A 30VDC)

>1x105 (2A 30VDC)

>1x105 (0.1A 300VDC)

* For full voltage rating, signal sources to be switched must be fully

isolated from mains supply and safety earth.

Power Requirements

+3.3V +5V +12V -12V

0 1.06A (typ 280mA) 0 0

Operating/Storage Conditions

Operating Conditions

Operating Temperature:

Humidity:

Altitude:

0°C to +55°C

Up to 90% non-condensing

5000m

Storage and Transport Conditions

Storage Temperature:

Humidity:

Altitude:

-20°C to +75°C

Up to 90% non-condensing

15000m

PXI & CompactPCI Compliance

The module is compliant with the PXI Specication 2.2. Local Bus,

Trigger Bus and Star Trigger are not implemented.

Uses a 33MHz 32-bit backplane interface.

Safety & CE Compliance

All modules are fully CE compliant and meet applicable EU

directives: Low-voltage safety EN61010-1:2010, EMC Immunity

EN61326-1:2013, Emissions EN55011:2009+A1:2010.

Mechanical Characteristics

Single slot 3U PXI (CompactPCI card).

3D models for all versions in a variety of popular le formats are

available on request.

Connectors

PXI bus via 32-bit P1/J1 backplane connector.

Signals via front panel 160-pin male DIN 41612 connector, for pin

outs please refer to the operating manual.

We recommend that Pickering mating connectors are used with

this module which are designed to ensure there are no mechanical

interference problems when used in a PXI chassis.

Relay Type

The 40-659A is tted with electro-mechanical double pole relays

with palladium-ruthenium gold covered contacts. A spare relay

is built onto the circuit board to allow easy maintenance with

minimum downtime.

8-Bank, 8-Channel 2-Pole MUX – 40-659A

pickeringtest.com

Ordering Information

Support Products

eBIRST

Switching System Test Tool

This product is supported by the eBIRST test tools which simplify

the identication of failed relays, the required eBIRST tools are

below. For more information go to: pickeringtest.com/ebirst

Product Test Tool Adaptor

40-659A 93-002-001 93-002-410

Spare Relay Kits

Kits of replacement relays are available for the majority of

Pickering’s PXI switching products, simplifying servicing and

reducing down-time.

Product Relay Kit

40-659A 91-100-001

For further assistance, please contact your local Pickering sales

ofce.

Mating Connectors & Cabling

For connection accessories for the 40-659A module please refer

to the 90-001D 160-pin DIN 41612 Connector Accessories data

sheet where a complete list and documentation can be found for

accessories, or refer to the Connection Solutions catalog.

Product Order Codes - Multiplexer

Channel

Selection Model Variant Order Code

Single 8-Bank, 8-Channel 2-Pole 40-659A-102

Note: The above module is available in multiple channel

selection mode by adding the “-M” sufx to the part number.

The MUX with multiple channel capability would be:

40-659A-102-M

Product Customization

Pickering PXI modules are designed and manufactured on our own

exible manufacturing lines, giving complete product control and

enabling simple customization to meet very specic requirements.

Customization can include:

• Alternative relay types

• Mixture of relay types

• Alternative number of relays

• Different performance specications

All customized products are given a unique part number, fully

documented and may be ordered at any time in the future. Please

contact your local sales ofce to discuss.

8-Bank, 8-Channel 2-Pole MUX – 40-659A

pickeringtest.com

Supporting Products & Software

We also offer customized cabling and have a free online Cable Design Tool that can

be used to create custom cable solutions for many applications.

Visit: pickeringtest.com/cdt to start your design.

Mass Interconnect

We recommend the use of a mass interconnect solution when an Interchangeable

Test Adapter (ITA) is required for a PXI or LXI based test system. Our modules are

fully supported by both Virginia Panel and MacPanel.

Pickering Reed Relays

We are the only switch provider with in-house reed relay manufacturing capability

via our sister company, Pickering Electronics. These instrument grade reed relays

feature SoftCenter® technology, ensuring long service life and repeatable contact

performance

To learn more, please go to: pickeringrelay.com

Chassis Compatibility

This PXI module must be used in a suitable chassis. It is compatible with the following chassis types:

• All chassis conforming to the 3U PXI and 3U Compact PCI (cPCI) specication

• Legacy and Hybrid Peripheral slots in a 3U PXI Express (PXIe) chassis

• Pickering Interfaces LXI or LXI/USB Modular Chassis

Chassis Selection Guide

Standard PXI or hybrid PXIe Chassis from any Vendor:

• Mix our 1000+ PXI switching & simulation modules with any

vendor’s PXI instrumentation

• Embedded or remote Windows PC control

• Real-time Operating System Support

• High data bandwidths, especially with PXI Express

• Integrated module timing and synchronization

Pickering LXI or LXI/USB Modular Chassis—only accept

our 1000+ PXI Switching & Simulation Modules:

• Ethernet or USB control enables remote operation

• Low-cost control from practically any controller

• LXI provides manual control via Web browsers

• Driverless software support

• Power sequencing immunity

• Ethernet provides chassis/controller voltage isolation

• Independence from Windows operating system

Connectivity Solutions

We provide a full range of supporting cable and connector solutions for all our switching products—20 connector families with 1200+

products. We offer everything from simple mating connectors to complex cables assemblies and terminal blocks. All assemblies are

manufactured by Pickering and are guaranteed to mechanically and electrically mate to our modules.

Connectors & Backshells Multiway Cable Assemblies RF Cable Assemblies Connector Blocks

8-Bank, 8-Channel 2-Pole MUX – 40-659A

pickeringtest.com

Supporting Products & Software

Pickering Interfaces maintains a commitment to continuous product development, consequently we reserve the right to vary from the description given in this data sheet.

Programming

Pickering provide kernel, IVI and VISA (NI & Keysight) drivers which are compatible with all Microsoft supported versions of Windows and

popular older versions. For a list of all supporting operating systems, please see: pickeringtest.com/os

The VISA driver is also compatible with Real-Time Operating Systems such as LabVIEW RT. For other RTOS support contact Pickering.

These drivers may be used with a variety of programming environments and applications including:

• Pickering Interfaces Switch Path Manager

• National Instruments products (LabVIEW, LabWindows/CVI, Switch Executive, MAX, TestStand, VeriStand, etc.)

• Microsoft Visual Studio products (Visual Basic, Visual C+)

• Keysight VEE

• Mathworks Matlab

• Marvin ATEasy

• MTQ Testsolutions Tecap Test & Measurement Suite

Drivers for popular Linux distributions are available, other environments are also supported, please contact Pickering with specic enquiries.

We provide Soft Front Panels (SFPs) for our products for familiarity and manual control, as well as comprehensive documentation and

example programs to help you develop test routines with ease.

To learn more about software drivers and development environments, please go to: pickeringtest.com/software

Signal Routing Software

Our signal routing software, Switch Path Manager, automatically selects and energizes switch

paths through Pickering switching systems. Signal routing is performed by simply dening

test system endpoints to be connected together, greatly accelerating Test System software

development.

To learn more, please go to: pickeringtest.com/spm

Diagnostic Relay Test Tools

eBIRST Switching System Test Tools are designed specically for our PXI, PCI or LXI

products, these tools simplify switching system fault-nding by quickly testing the system

and graphically identifying the faulty relay.

To learn more, please go to: pickeringtest.com/ebirst

Three Year Warranty & Guaranteed Long-Term Support

All standard products manufactured by Pickering Interfaces are warranted against

defective materials and workmanship for a period of three years from the date of delivery

to the original purchaser. Extended warranty and service agreements are available for all our modules and systems with various levels to

suit your requirements. Although we offer a 3-year warranty as standard, we also include guaranteed long-term support—with a history of

supporting our products for typically 15-20 years. To learn more, please go to: pickeringtest.com/support

Available Product Resources

We have a large library of product resources including success stories, product and support videos, articles, as well as complete product

catalogs and product reference maps to assist when looking for the switching, simulation and cable and connector solutions you need.

We have also published handy reference books for the PXI and LXI standards.

To view, download or request any of our product resources, please visit: pickeringtest.com/resources

Inhaltsverzeichnis

Andere Pickering Multiplexer Handbücher

Pickering

Pickering 40-670C Bedienungsanleitung

Pickering

Pickering PXI 40-785B Bedienungsanleitung

Pickering

Pickering PXI Power MUX BRIC 40-571 Bedienungsanleitung

Pickering

Pickering PXI 40-617 Bedienungsanleitung

Pickering

Pickering PCI 50-670 Bedienungsanleitung

Pickering

Pickering 40-657 Bedienungsanleitung

Pickering

Pickering 40-630A Bedienungsanleitung

Pickering

Pickering 40-640 Bedienungsanleitung

Pickering

Pickering 40-681 Bedienungsanleitung

Pickering

Pickering 40-657A Bedienungsanleitung

Pickering

Pickering 42-204 Bedienungsanleitung

Pickering

Pickering 40-616 Bedienungsanleitung

Pickering

Pickering LXI 50 Bedienungsanleitung

Pickering

Pickering 40-652A Bedienungsanleitung

Pickering

Pickering 20-610 Bedienungsanleitung

Pickering

Pickering 40-619 Bedienungsanleitung

Pickering

Pickering PXI 40-661 Bedienungsanleitung

Pickering

Pickering 40-784A Bedienungsanleitung

Pickering

Pickering 40-756 Bedienungsanleitung

Pickering

Pickering PXI 40-660 Bedienungsanleitung

Pickering

Pickering 40-655A Bedienungsanleitung

Pickering

Pickering 40-675A Bedienungsanleitung

Pickering

Pickering 40-570A Bedienungsanleitung

Pickering

Pickering 20-745 Bedienungsanleitung

Beliebte Multiplexer Handbücher anderer Marken

Campbell

Campbell AM416 Bedienungsanleitung

Paradyne

Paradyne SIM2000 Bedienungsanleitung

Panasonic

Panasonic WJFS616 - SWITCHER Bedienungsanleitung

Lanex

Lanex TM-77 Bedienungsanleitung

Bosch

Bosch VSS8394/01T Bedienungsanleitung

Quark-Elec

Quark-Elec QK-A035 Bedienungsanleitung

ADTRAN

ADTRAN Frameport 768 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E247 Bedienungsanleitung

Paradyne

Paradyne Hotwire 8786 Bedienungsanleitung

RFL Electronics

RFL Electronics 9508D UCC Bedienungsanleitung

Miranda

Miranda AMX-101i Bedienungsanleitung

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Bedienungsanleitung

GE StoreSafe SDVR-10 Bedienungsanleitung

American Fibertek

American Fibertek MTX-8410C Bedienungsanleitung

ADC

ADC HiGain ELU-319 5E Bedienungsanleitung

Paradyne

Paradyne Hotwire 8774 Bedienungsanleitung

American Fibertek

American Fibertek MTX-8810C-SL Bedienungsanleitung

Viessmann

Viessmann 5229 Bedienungsanleitung