Pickering 40-850 Bedienungsanleitung

pickeringtest.com

Issue 5.5 August 2022

40-850/852 User Manual

PXI MEMS Fiber Optic Multiplexer Module

Page (II) MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

Page (II) REED RELAY MODULE 40-110/115/120/125

pickering

No part of this publication may be reproduced, transmitted, transcribed, translated or stored in any form, or by

any means without the written permission of Pickering Interfaces.

Technical details contained within this publication are subject to change without notice.

ISO 9001

Reg No. FM38792

Page (III)

MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

Page (III)

REED RELAY MODULE 40-110/115/120/125

pickering

TECHNICAL SUPPORT

For Technical Support please contact Pickering Interfaces either by phone, the website or via e-mail.

WARRANTY

All products manufactured by Pickering Interfaces are warranted against defective materials and workmanship for a period of

three years, excluding programmable power supplies, from the date of delivery to the original purchaser. Any product found to be

defective within this period will, at the discretion of Pickering Interfaces be repaired or replaced.

Products serviced and repaired outside of the warranty period are warranted for ninety days.

Extended warranty and service are available. Please contact Pickering Interfaces by phone, the website or via e-mail.

ENVIRONMENTAL POLICY

Pickering Interfaces operates under an environmental management system similar to ISO 14001.

Pickering Interfaces strives to full all relevant environmental laws and regulations and reduce wastes and releases to the

environment. Pickering Interfaces aims to design and operate products in a way that protects the environment and the health and

safety of its employees, customers and the public. Pickering Interfaces endeavours to develop and manufacture products that can

be produced, distributed, used and recycled, or disposed of, in a safe and environmentally friendly manner.

Worldwide Technical Support and Product Information

pickeringtest.com

Germany

Tel: +49 89 125 953 160

E-mail: [email protected]

Sweden

Tel: +46 340-69 06 69

E-mail: [email protected]

USA

Tel: (West) +1 541 471 0700

Tel: (East) +1 781 897 1710

E-mail: [email protected]

Czech Republic

Tel: +420 558 987 613

E-mail: [email protected]

France

Tel +33 9 72 58 77 00

E-mail [email protected]

Pickering Interfaces Headquarters

Stephenson Road Clacton-on-Sea CO15 4NL United Kingdom

Tel: +44 (0)1255-687900

E-Mail: [email protected]

China

Tel: +86 4008 799 765

E-mail: [email protected]

Page (IV) MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

Page (IV) REED RELAY MODULE 40-110/115/120/125

pickering

MEANING / DESCRIPTION SYMBOL

PROTECTIVE EARTH (GROUND)

To identify any terminal which is intended for connection to an external conductor for

protection against electric shock in case of a fault, or the terminal of a protective earth

(ground) electrode.

DANGEROUS VOLTAGE

To indicate hazards arising from dangerous voltages.

WARNING / CAUTION

An appropriate safety instruction should be followed or caution to a potential hazard

exists.

Refer to the relevant instructions detailed within the product manual.

HEAVY

If this product is heavy and reference should be made to the safety instructions for

provisions of lifting and moving.

LASER PRODUCT

This product is capable of switching laser optical signals.

STATIC SENSITIVE

To indicate that static sensitive devices are present and handling precautions should

be followed.

SAFETY SYMBOLS

PRODUCT SAFETY

The following safety symbols may be used on the product and throughout the product documentation.

Page (V)

MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

Technical Support and Warranty................................................III

Product Safety .............................................................................IV

Contents (this page)....................................................................V

Warnings and Cautions ..............................................................VII

Section 1

Technical Specication...............................................................1.1

Section 2

Technical Description .................................................................2.1

Functional Description..........................................................2.1

Section 3

Installation....................................................................................3.1

Pre Operation Checks...........................................................3.1

Hardware Installation ............................................................3.2

Software Installation .............................................................3.2

Testing Operation ..................................................................3.3

Section 4

Programming Guide....................................................................4.1

Programming Options For Pickering PXI Modules ............4.1

Module Architecture..............................................................4.2

Programming The Module ....................................................4.3

Section 5

Connector Information................................................................5.1

Section 6

Trouble Shooting .........................................................................6.1

Section 7

Maintenance Information............................................................7.1

Relay Lookup Tables.............................................................7.1

Component Layout................................................................7.2

CONTENTS

Page (VI) MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

THIS PAGE INTENTIONALLY BLANK

Page (VII)

MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

Page (VII)

REED RELAY MODULE 40-110/115/120/125

pickering

WARNINGS AND CAUTIONS

WARNING - HAZARDOUS ENVIRONMENTS SYMBOL

This product is not specically designed for use in hazardous environments, for example in explosive

atmospheres. If the product is to be used in hazardous environments we recommend that the user

ensures suitable protective measures are taken.

WARNING - DANGER OF ELECTRIC SHOCK SYMBOL

This module may contain hazardous voltages. Before removing the module from the rack remove all

supplies and disconnect user I/O signals.

Unused slots in the PXI/LXI chassis are populated with blanking plates to prevent access to user

I/O signals that may be present. Blanking panels are available to order from Pickering in a variety

of slot widths. If the product is not used in this manner for example by using an extender card then

additional care must be taken to avoid contact with exposed signals.

CAUTION - HANDLING OF ELECTROSTATIC-SENSITIVE DEVICES SYMBOL

Certain semiconductor devices used in this equipment are liable to damage due to static voltage.

Observe the following precautions when handling these devices in their unterminated state, or

sub-assemblies containing these devices:

1. Persons removing sub-assemblies from equipment using these devices must be earthed by a

wrist strap and a resistor at the point provided on the equipment.

2. Soldering irons used during the repair operations must be low voltage types with earthed tips and

isolated from the mains voltage by a double insulated transformer.

3. Outer clothing worn must be unable to generate static charges.

4. Printed Circuit Boards (PCBs) tted with these devices must be stored and transported in

anti-static bags.

CAUTION - PRODUCT DOCUMENTATION SYMBOL

Suitably qualied & trained users should ensure that the accompanying documentation is fully read

and understood before attempting to install or operate the product.

WARNING - RISK OF INJURY SYMBOL

This product may be specically designed to switch optical signals. Under no circumstances look

into the end of an optical output or an optical cable attached to an optical output. LASER RADIATION

CAN SERIOUSLY DAMAGE YOUR EYESIGHT.

Read and understand the safety information of the laser source connected to the optical switch.

Page (VIII) MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

Page (VIII) REED RELAY MODULE 40-110/115/120/125

pickering

SAFETY INSTRUCTIONS

All cleaning and servicing requires the equipment to be isolated and disconnected from the power source and user

I/O signals (refer to the Maintenance Section).

• Appropriate manual handling procedures should be followed as dictated by the weight of the individual module or

the combined weight of the modules & chassis.

• Should a fault occur with the module or chassis, immediately isolate and disconnect the incoming power to the

chassis and the user I/O signals.

• Ensure the equipment is installed, operated and maintained by trained and authorised personnel.

• Modules are not accessed to EN 60825, users should observe the safety instructions and laser

class for the 3rd party laser source.

• The module may be capable of switching optical signals from a laser device; do not stare directly

at the user I/O ports.

• For suitably equipped products in the event of an emergency press the red “emergency stop” button situated on

the front of the unit.

Page 1.1

MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering SECTION 1 - TECHNICAL SPECIFICATION

SECTION 1 - TECHNICAL SPECIFICATION

PXI MEMS Fiber Optic Multiplexer 40-850/852

pickeringtest.com

ISSUE 8.2 AUG 2022

Ch 1

Ch 2

Ch 3

Ch 4

Com

Ch 5

Ch 6

Ch 7

Ch 8

Com

Ch 1

Ch 2

Ch 3

Ch 4

Block Diagram of

8 Channel Fiber

Optic Multiplexer

Block Diagram of

4 Channel Fiber

Optic Multiplexer

40-852-018

8 Channel Fiber

Optic Multiplexer

ySingle 8 to 1 or Single 4 to 1 Fiber Optic MUX

yHigh Density 1 or 2 Slot Width Modules

yFC/APC, FC/PC or SC/PC Connectors

ySmall Form Factor Connectors LC or MU (mini SC)

y1240 to 1640 nm Single Mode

y700 to 1700 nm Multi-Mode

yReturn Loss >55 dB

yLong Operating Life >109 Operations with High

Repeatability ± 0.01 dB and Good Temperature

Stability

yCrosstalk -60 dB Typical

y1 ms Typical Switching Time

yVISA, IVI & Kernel Drivers Supplied for Windows

ySupported by PXI or LXI Chassis

y3 Year Warranty

Pickering PXI MEMS Fiber Optic multiplexer modules are available

in 8:1 or 4:1 formats with a choice of 5 different connector styles to

suit most applications: FC/APC (for optimal performance), FC/PC

and SC/PC for general applications and LC and MU for high density

applications.

The ﬁber optic multiplexers connect the common to a channel by

redirecting the optical signal into a selected output ﬁber. This is

achieved using Micro-Mechanical Mirrors driven by a highly precise

mechanism and activated via an electrical control signal.

The range of MEMS (Micro-Electro-Mechanical-Systems) based

optical switches is:

• 40-850 – Single 4 Channel Multiplexer

• 40-852 – Single 8 Channel Multiplexer

Pickering can construct custom optical systems to customers

precise requirements. We have a large range of electrical switching

modules which can form a complete PXI based telecom switching

solution.

MEMS offers many advantages over traditional optical prism

technology as used in the 40-810/815/820 modules. MEMS offers

similar optical performance but with lower price, higher packing

density, faster operate time and much longer operating life.

Key Features

• Very fast operate time <1 ms

• Very long life >109 operations

• Return loss greater than 55 dB

• High repeatability over a broad range of environmental conditions

• High density

Applications

• Optical signal routing

• Fiber network conﬁguration

• Fiber Optic Component Test

Page 1.2 MEMS FIBER OPTIC MULTIPLEXER MODULE 40-850/852

pickering

SECTION 1 - TECHNICAL SPECIFICATION

MEMS Fiber Optic MUX, 40-850/852

pickeringtest.com

Speciﬁcations

Power Requirements

+3.3 V +5 V +12 V -12 V

0 300 mA (typ 220 mA) 0 0

Operating/Storage Conditions

Operating Conditions

Operating Temperature:

Humidity:

Altitude:

0 °C to +55 °C

Up to 90 % non-condensing

5000 m

Storage and Transport Conditions

Storage Temperature:

Humidity:

Altitude:

-20 °C to +75 °C

Up to 90 % non-condensing

15000 m

PXI & CompactPCI Compliance

The module is compliant with the PXI Speciﬁcation

2.2. Local Bus, Trigger Bus and Star Trigger are not

implemented.

Uses a 33 MHz 32-bit backplane interface.

Safety & CE Compliance

All modules are fully CE compliant and meet applicable

EU directives: Low-voltage safety EN61010-1:2010,

EMC Immunity EN61326-1:2013,

Emissions EN55011:2009+A1:2010.

General Speciﬁcation (All versions)

Fiber Switch Type:

Internal Fiber Type:

MEMS

SM 9/125

Wavelength:

Insertion loss (4 channel versions):

Insertion loss (8 channel versions):

Return loss (APC version):

Return loss (other versions):

Polarization dependent loss (PDL):

Repeatability:

Crosstalk:

Optical Input Power:

1240 to 1640 nm

1 dB Typ

1.5 dB Typ

60 dB Min

55 dB Min

0.05 dB Max

±0.01 dB Max

-60 dB Max

300 mW Max

Thermal Stability:

(-10 to 75 °C insertion loss variation)

0.2 dB Max

Expected Life: >>109 operations

Maximum Switching Time:

Cycle Rate:

1 ms

500/sec

Additional Speciﬁcation (MM versions)

Fiber Switch Type:

Internal Fiber Type:

MEMS

MM 62.5/125 or

50/125

Wavelength:

Insertion loss (4 channel versions):

Insertion loss (8 channel versions):

Return loss (other versions):

Polarization dependent loss (PDL):

700 to 1700nm

1 dB Typ

1.5 dB Typ

55 dB Min

0.05 dB Max

Mechanical Characteristics

All modules are either 1 or 2 slot 3U PXI (CompactPCI)

cards as indicated in Product Order Codes.

Module weight: <0.8 Kg typical.

3D models for all versions in a variety of popular ﬁle

formats are available on request.

Connectors

PXI bus via 32-bit P1/J1 backplane connector.

Signals via front panel ﬁber optic connectors (choice of FC/

APC, FC/PC, SC/PC, MU or LC types).

Other Connector Styles

Pickering can manufacture Fiber Optic Switch modules

with other connector styles, please contact sales ofﬁce for

further information.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pickering Multiplexer Handbücher

Pickering

Pickering 40-650A Bedienungsanleitung

Pickering

Pickering 40-681A Bedienungsanleitung

Pickering

Pickering 40-611A Bedienungsanleitung

Pickering

Pickering 40-614B Bedienungsanleitung

Pickering

Pickering 40-735 Bedienungsanleitung

Pickering

Pickering 40-662A Bedienungsanleitung

Pickering

Pickering 50-670A Bedienungsanleitung

Pickering

Pickering 40-310 Bedienungsanleitung

Pickering

Pickering 40-761 Series Bedienungsanleitung

Pickering

Pickering 40-675A Bedienungsanleitung

Pickering

Pickering 42-204 Bedienungsanleitung

Pickering

Pickering PXI Power MUX BRIC 40-571A Bedienungsanleitung

Pickering

Pickering PXI 40-661 Bedienungsanleitung

Pickering

Pickering LXI 60-555 Bedienungsanleitung

Pickering

Pickering PXI 40-655 Bedienungsanleitung

Pickering

Pickering 40-613 Bedienungsanleitung

Pickering

Pickering PXI 40-850A Bedienungsanleitung

Pickering

Pickering 40-659A Bedienungsanleitung

Pickering

Pickering 40-756 Bedienungsanleitung

Pickering

Pickering PCI 50-725 Bedienungsanleitung

Pickering

Pickering 50-670C Bedienungsanleitung

Pickering

Pickering PXI 40-620 Bedienungsanleitung

Pickering

Pickering PXI 40-617 Bedienungsanleitung

Pickering

Pickering 40-640 Bedienungsanleitung

Beliebte Multiplexer Handbücher anderer Marken

Campbell

Campbell AM416 Bedienungsanleitung

Paradyne

Paradyne SIM2000 Bedienungsanleitung

Panasonic

Panasonic WJFS616 - SWITCHER Bedienungsanleitung

Lanex

Lanex TM-77 Bedienungsanleitung

Bosch

Bosch VSS8394/01T Bedienungsanleitung

Quark-Elec

Quark-Elec QK-A035 Bedienungsanleitung

ADTRAN

ADTRAN Frameport 768 Bedienungsanleitung

Elo TouchSystems

Elo TouchSystems E247 Bedienungsanleitung

Paradyne

Paradyne Hotwire 8786 Bedienungsanleitung

RFL Electronics

RFL Electronics 9508D UCC Bedienungsanleitung

Miranda

Miranda AMX-101i Bedienungsanleitung

ShipModul

ShipModul MiniPlex-AIX NMEA-0183 Bedienungsanleitung

GE StoreSafe SDVR-10 Bedienungsanleitung

American Fibertek

American Fibertek MTX-8410C Bedienungsanleitung

ADC

ADC HiGain ELU-319 5E Bedienungsanleitung

Paradyne

Paradyne Hotwire 8774 Bedienungsanleitung

American Fibertek

American Fibertek MTX-8810C-SL Bedienungsanleitung

Viessmann

Viessmann 5229 Bedienungsanleitung