Pilz PSEN opII3F Series Bedienungsanleitung

PSEN opII3F Series

Operating Manual 1003504-EN-01

}PSEN sensor technology

Preface

This document is a translation of the original document.

All rights to this documentation are reserved by Pilz GmbH & Co. KG. Copies may be made

for internal purposes. Suggestions and comments for improving this documentation will be

gratefully received.

Source code from third-party manufacturers or open source software has been used for

some components. The relevant licence information is available on the Internet on the Pilz

homepage.

Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS p®,

SafetyEYE®, SafetyNET p®, the spirit of safety® are registered and protected trademarks

of Pilz GmbH & Co. KG in some countries.

SD means Secure Digital

Contents

Operating Manual PSEN opII3F Series

1003504-EN-01 3

Introduction 5

Validity of documentation 5

Using the documentation 5

Definition of symbols 5

Overview 6

Unit view 8

Scope 10

Safety 11

Intended use 11

Safety regulations 12

Safety assessment 12

Use of qualified personnel 12

Warranty and liability 12

Disposal 12

Function description 13

Basic function 13

Automatic start and restart 13

Project configuration 15

Maintaining the safety distance 15

Resolution 16

Protected field perimeters 16

Ambient conditions 16

Distance from reflective surfaces 17

Minimum distance between parallel, aligned safety light grids 20

Installation of several adjacent safety light grids 21

Use of deviating mirrors 21

Dead zones 22

Installation and orientation 24

Attach the safety light grid to the installation surface 25

Orientation 28

General guidelines 28

Safety light grid alignment 29

Wiring 30

General guidelines 30

Connector pin assignment 31

Earthing the safety light grid 31

Commissioning 32

System connection 32

Checking the safety light grid 33

Contents

Operating Manual PSEN opII3F Series

1003504-EN-01 4

Operation 35

Display elements 35

Status information 36

Safety light grid restart 38

Malfunction 38

Regular checks and maintenance 38

Checks 38

Regular check 38

Check after plant/machine modification 39

Maintenance 39

Dimensions 40

Technical details Order no. 632040-632042 42

Technical details Order no. 632043-632045 44

Technical details Order no. 632046-632048 47

Technical details Order no. 632049-632051 49

Safety characteristic data 52

Order reference 52

Order reference for safety light grids 52

Order reference for accessories 53

Order reference: Component parts 55

Appendix 56

Check list 56

EC declaration of conformity 58

PSEN opII3F Series

Operating Manual PSEN opII3F Series

1003504-EN-01 5

Introduction

Validity of documentation

This documentation is valid for the product PSEN opII3F Series. It is valid until new docu-

mentation is published.

This operating manual explains the function and operation, describes the installation and

provides guidelines on how to connect the product.

Using the documentation

This document is intended for instruction. Only install and commission the product if you

have read and understood this document. The document should be retained for future ref-

erence.

Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses

an immediate threat of serious injury and death and indicates preventive

measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could

lead to serious injury and death and indicates preventive measures that can

be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus

material damage, and also provides information on preventive measures

that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-

aged and also provides information on preventive measures that can be

taken. It also highlights areas within the text that are of particular import-

ance.

PSEN opII3F Series

Operating Manual PSEN opII3F Series

1003504-EN-01 6

INFORMATION

This gives advice on applications and provides information on special fea-

tures.

Overview

Safety light grids in the PSEN opII3F Series constitute electrosensitive protective equip-

ment (ESPE type: 3) in accordance with DIN EN 61496-1 for work areas in which ma-

chines, robots, and automated systems could endanger the physical integrity of operators.

Unit features

}Resolution: 14 mm

}Infrared protected field is generated

}LED indicator for status information

}Optical synchronisation of transmitters and receivers

}Connection to evaluation devices

– PDP67 ION and PDP67 ION HP: 5-pin M12 two-sided connector (see Order refer-

ence for accessories, connection to PDP67 [ 54])

– all other suitable evaluation devices (see System connection [ 32]): 5-pin M12

one-sided connector and open cable end connection to clamping sleeves (see Or-

der reference for accessories, connection to other evaluation devices [ 54])

}Aluminium alloy housing

}Die-cast zinc end caps

}Shock resistance

– Bracket Swivel-Mount : 10g

– Bracket Adv Bracket Kit : 50g

}Front panel of PC

}Standard installation kit with flexible bracket (swivel mount) (included in delivery) to hold

the transmitter/receiver

– For standard application

– Transmitter/receiver remains rotatable for proper orientation

}Dead-zone-free safety light grid installation [ 22] with the

PSENopIIAdvBracketKit (available as an accessory [ 53]) as a bracket for a

transmitter/receiver

– Dead-zone-free on both sides for protected field height of 300 mm or more

– Dead-zone-free on one side for protected field height of 150 mm

– Transmitter/receiver remains rotatable for proper orientation

– Protected field heights of 150-600 mm, including: 1PSENopIIAdvBracketKit-2

(=2clamping units per transmitter and receiver)

PSEN opII3F Series

Operating Manual PSEN opII3F Series

1003504-EN-01 7

– Protected field heights of 750-1200 mm, including: 1PSENopIIAdvBracketKit-3

(=3clamping units per transmitter and receiver)

– Protected field heights of 1350-1800 mm, including: 2PSENopIIAdvBracketKit-2

(=4clamping units per transmitter and receiver)

PSEN opII3F Series

Operating Manual PSEN opII3F Series

1003504-EN-01 8

Unit view

[5]

[3]

[1]

[4] [4] [4] [4]

[5]

[3]

[6]

[2]

[1]

Receiver Transmitter

Fig.: Front view of the safety light grid transmitter and receiver, protected field height 300-1800 mm

with connection cable

Legende

[1] Protected field height

[2] Effective protected field height

[3] Tinted front panel

[4] LEDs for status information

PSEN opII3F Series

Operating Manual PSEN opII3F Series

1003504-EN-01 9

[5] Connection cable, M12 connector

[6] Optical centre axis

[5]

[3]

[1]

[4] [4] [4] [4]

[5]

[3]

[7]

[6]

[2]

[1]

Receiver Transmitter

Fig.: Front view of the safety light grid transmitter and receiver, protected field height 150 mm with

connection cable

Legende

[1] Protected field height

[2] Effective protected field height

[3] Tinted front panel

[4] LEDs for status information

[5] Connection cable, M12 connector

[6] Optical centre axis

PSEN opII3F Series

Operating Manual PSEN opII3F Series

1003504-EN-01 10

[7] Dead zone

The beginning of the dead zone is indicated by black lines on both sides of the

front panel

Scope

Qty Description Diagram

1 Transmitter

1 Receiver

4 Standard installation kit

consisting of:

4}Flexible bracket

(swivel mount) in

which transmitters/re-

ceivers can be

fastened and rotated

to the proper orienta-

tion

4}Holder for connecting

the transmitter/re-

ceiver end caps to

the flexible bracket

16 }Tightening screw

M3x33.4 oval-head

screw, self-tapping

4}Clamping screw with

nut

ISO4762 M4x10 8.8

cylinder screw with

nut

8}Mounting screw

ISO4762 M6x20 8.8

cylinder screw with

washer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Pilz Sicherheitssensor Handbücher

Pilz

Pilz PSEN 2.1p-20 Bedienungsanleitung

Pilz

Pilz PSEN ma1.4-51 M12/8-0.15m Bedienungsanleitung

Pilz

Pilz PSEN cs3.1a/b Bedienungsanleitung

Pilz

Pilz PSEN sl-0.5n 2.1 Bedienungsanleitung

Pilz

Pilz PSENslock PSEN sl-1.0p 1.1 VA Bedienungsanleitung

Pilz

Pilz PSEN opII4HS-30-015 Bedienungsanleitung

Pilz

Pilz PSEN cs1.1n Bedienungsanleitung

Pilz

Pilz PSEN ml s 1.1 Bedienungsanleitung

Pilz

Pilz PSEN ma1.3-20 M12/8 VA Bedienungsanleitung

Pilz

Pilz PSEN cs1.1n Bedienungsanleitung

Pilz

Pilz PSEN sl-1.0n 1.1 Bedienungsanleitung

Pilz

Pilz PSEN cs3.1a/b Bedienungsanleitung

Pilz

Pilz PSEN opII4H Series Bedienungsanleitung

Pilz

Pilz PSEN cs2.1n Bedienungsanleitung

Pilz

Pilz PSEN opII3H Series Bedienungsanleitung

Pilz

Pilz PSEN ml ba 1.1 Bedienungsanleitung

Pilz

Pilz PNOZ mmc2p Bedienungsanleitung

Pilz

Pilz PSEN cs2.1p Bedienungsanleitung

Pilz

Pilz PSEN ma2.1p-10 Bedienungsanleitung

Pilz

Pilz PSEN 2.2p-21 Bedienungsanleitung

Pilz

Pilz PSEN cs2.2n Bedienungsanleitung

Pilz

Pilz PSEN ml sa 1.1 Bedienungsanleitung

Pilz

Pilz PSEN opII4F Series Bedienungsanleitung

Pilz

Pilz PSEN ml b 1.1 Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung