Pioneer VSX-LX101 Installationsanleitung

Hookup

Step1: Choose your Speaker Layout .......................................3

Step2: Connect the Speakers ..................................................9

Step3: Connect the TV ..........................................................11

Step4: Connect the AV Components .....................................13

Step5: Connect Other Cables ................................................16

Setup

Step6: Power On & Initial Setup ............................................17

HDMI Setup ...........................................................................18

Playback

Basic Playback ......................................................................19

Network Functions .................................................................20

Others ....................................................................................22

Part Names

Front Panel ............................................................................24

Rear Panel ............................................................................25

Remote Controller .................................................................26

Display ...................................................................................26

This manual includes information needed when starting up and also

instructions for frequently used operations. The "Advanced Manual" is

available on the internet with details about the playback features/

listening modes/settings details, specifications, and troubleshooting.

The Advanced Manual is created in a format that makes it easy to read

on a PC or Smartphone.

http://www.pioneer-audiovisual.com/manual/vsxlx101/adv/en.html

Advanced Manual found here

> Before start > Hookup > Setup > Playback > Part Names

Basic

Manual

AV Receiver

VSX-LX101

SN29402193_VSX-101_BAS_En.book 1 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

What's in the box

1. Main unit 2. Remote controller (RC-914R)

×1, Batteries (AAA/R03) ×2

3. Indoor FM antenna ×1 4. AM loop antenna ×1 5. Speaker setup microphone ×1

6. Power cord ×1

Main features

This unit is connected between your TV and your AV components. To play, select the source with the input

selector. You can connect 7.1ch of speakers to this unit, with 7ch at 140 W (6 ohms, 1 kHz, 0.9%THD) (North

American models) / 130 W (6 ohms, 1 kHz, 1%THD) (Taiwanese models) per channel plus a powered subwoofer

pre out jack.

Supports playback in Dolby Atmos format which provides 360e sound placement

The HDMI jack supports 4K video input and output. Jacks IN1 to 3 and OUT support HDCP2.2

HDMI CEC functionality: Control features such as linking input switching with the input selector and players

conforming to the CEC standard, switching audio output and volume using the remote controller of a CEC-

compliant TV, and automatically switching this unit to standby when the TV is turned off

HDMI Standby Through: Video and audio signals from AV components can be transmitted to the TV even if this

unit is in standby

ARC: Connection with an ARC-compatible TV is complete with one HDMI cable

Easy Initial Setup using onscreen guidance and On-Screen Display (OSD) showing operations on the TV

Internet radio and AirPlay via wired LAN or Wi-Fi (wireless LAN) and network features such as Music Server

that enables PC music file playback, USB playback, plus other playback features such as AM/FM radio and

BLUETOOTH

play

Playback formats supported by Music Server and USB include WAV, FLAC and DSD high-res source

We plan to provide support for the DTS:X audio format through a firmware update for this unit. Refer to our

homepage for more information.

CAUTION: Connect speakers with 6 Ω to 16 Ω impedance. The power cord must be connected only after

all other cable connections are completed.

0We will not accept responsibility for damage arising from the connection of equipment manufactured by

other companies.

SN29402193_VSX-101_BAS_En.book 2 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

Step1: Choose your Speaker Layout

12 Front Speakers

3Center Speaker

45 Surround Speakers

6Powered Subwoofer

For 5.1-Channel System

This is a 5.1-channel system that is the basic surround system.

Front speakers output front stereo sound and a center speaker outputs center

sound such as dialogs and vocals. Surround speakers create back sound

field. Powered subwoofer reproduces bass sounds and creates rich sound

field. The front speakers should be positioned at ear height, while the

surround speakers should be positioned just above ear height. Center

speaker should be set up facing the listening position. Place the powered

subwoofer towards the front. Placing it between the center speaker and a front

speaker gives you a natural sound even when playing music.

0The front speakers, center speaker, and surround speakers are counted as

5 channels, and the powered subwoofer is counted as 0.1 of a channel,

giving us the name 5.1ch system.

＊1: 22e to 30e, ＊2: 120e

Go To "Hookup" (



P9)

＊1

＊2



SN29402193_VSX-101_BAS_En.book 3 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

(



P3)

78 Surround Back Speakers

For 7.1-Channel System (with

Surround Back Speakers)

This is a system with surround back speakers added to the basic 5.1-channel

system. The connection of surround back speakers improves the sense of

envelopment and connectivity of sound created by the back sound field and

provides a more real sound field. You can select the Dolby Atmos listening

mode, which realizes the most up-to-date 3D surround sound, when the input

format is Dolby Atmos. With formats other than Dolby Atmos, you can still

create a sound field by outputting sound from the surround back speakers

when you select the Dolby Surround listening mode. The optimal positioning is

for surround back speakers to be at ear height. Place the surround speakers

in a more slightly forward position than you would in a 5.1-channel system.

0If you are including surround back speakers in the setup, surround

speakers are required.

＊1: 22e to 30e, ＊2: 90e to 110e, ＊3: 135e to 150e

Go To "Hookup" (



P9)

＊2

＊3

＊1



SN29402193_VSX-101_BAS_En.book 4 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

3´ (0.9 m)

or more

(



P3)

78 Height Speakers

Choose one of the following:

Front High Speakers

Rear High Speakers

For 7.1-Channel System

(with Height Speaker-A)

This is a basic 5.1-channel system with the addition of height speakers, either

as front high speakers or rear high speakers. Select which speakers to setup

according to the environment of the room. You can select the Dolby Atmos

listening mode (5.1.2 channel playback), which realizes the most up-to-date

3D surround sound including overhead sounds, when the input format is Dolby

Atmos. With formats other than Dolby Atmos, you can still create a sound field

by outputting sound from the height speakers when you select the Dolby

Surround listening mode. Front high speakers or rear high speakers should be

situated at least 0.9 m higher than the front speakers. Front high speakers

should be situated directly above the front speakers and the distance between

the rear high speakers should match the distance between the front speakers.

Both should be set up facing the listening position.

＊1: 22e to 30e, ＊2: 120e

Go To "Hookup" (



P9)

＊1

＊2



SN29402193_VSX-101_BAS_En.book 5 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

(



P3)

78 Height Speakers

Choose one of the following:

Top Front Speakers

Top Middle Speakers

Top Rear Speakers

For 7.1-Channel System

(with Height Speaker-B)

This is a basic 5.1-channel system using ceiling speakers, for example, with

the addition of height speakers, either as top front speakers, top middle

speakers, or top rear speakers. Select which speakers to setup according to

the environment of the room. You can select the Dolby Atmos listening mode

(5.1.2 channel playback), which realizes the most up-to-date 3D surround

sound including overhead sounds, when the input format is Dolby Atmos. With

formats other than Dolby Atmos, you can still create a sound field by

outputting sound from the height speakers when you select the Dolby

Surround listening mode. Fit top front speakers on the ceiling forward of the

seating position, top middle speakers on the ceiling directly above the seating

position, and top rear speakers on the ceiling behind the seating position. The

distance between each pair should match the distance between the two front

speakers.

0Dolby Laboratories recommends placing this type of height speakers to

obtain the best Dolby Atmos effect.

＊1: 30e to 55e, ＊2: 65e to 100e, ＊3: 125e to 150e

Go To "Hookup" (



P9)

＊1

＊2

＊3



SN29402193_VSX-101_BAS_En.book 6 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

(



P3)

78 Height Speakers

Choose one of the following:

Dolby Enabled Speakers (Front)

Dolby Enabled Speakers (Surround)

For 7.1-Channel System

(with Height Speakers-C)

This is a basic 5.1-channel system that using Dolby enabled speakers, with

the addition of height speakers, either as Dolby enabled speakers (front) or

Dolby enabled speakers (surround). Select which speakers to setup according

to the environment of the room. Dolby enabled speakers are special speakers

designed to face the ceiling so that sound is heard after bouncing off the

ceiling so that sound appears to be coming from overhead. You can select the

Dolby Atmos listening mode (5.1.2 channel playback), which realizes the most

up-to-date 3D surround sound including overhead sounds, when the input

format is Dolby Atmos. With formats other than Dolby Atmos, you can still

create a sound field by outputting sound from the height speakers when you

select the Dolby Surround listening mode. Place them either above the front

speakers or above the surround speakers. If they are integrated Dolby

enabled speakers, put in place of the front speakers or the surround speakers.

＊1: 22e to 30e, ＊2: 120e

Go To "Hookup" (



P9)

＊1

＊2



SN29402193_VSX-101_BAS_En.book 7 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

12 Front Speakers (Bi-Amping)

3Center Speaker

45 Surround Speakers

6Powered Subwoofer

For Bi-Amping the Speakers

It is possible to connect front speakers supporting Bi-Amping to improve

quality of the bass and treble. The maximum number of channels available

with this connection is 5.1 because Bi-Amping speakers require one amplifier

for the tweeter jacks and one amplifier for the woofer jacks. The effects and

placements for speakers are the same as the 5.1-channel plan that doesn't

use Bi-Amping speakers.

＊1: 22e to 30e, ＊2: 120e

Go To "Hookup" (



P10)

＊1

＊2



SN29402193_VSX-101_BAS_En.book 8 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

Step2: Connect the Speakers

1/2˝

(12 mm)

1 Speaker cable, 2 Subwoofer cable

in case of:

Pages 3 to 7

Connect 123456 for a 5.1-channel system.

For a 7.1-channel system, select either surround back

speakers or height speakers, and connect 78.

Up to two powered subwoofers can be connected. The

same signal is output from each of the SUBWOOFER

jacks.

Make sure the exposed wires of the speakers do not stick out of

the speaker terminals when connecting. If the exposed wires of

the speakers touch the rear panel or the + and – wires touch each

other, the protection circuit will be activated.

Setup

0The speaker configuration is set to

12345678 audio output by default. If there

are speakers you won't be connecting, you need to

change the settings in Initial Setup, "1. Full Auto

MCACC" (



P17) so that the audio from those

speakers you are not connecting is sent to other

speakers.

SN29402193_VSX-101_BAS_En.book 9 ページ２０１６年１月６日　水曜日　午前１２時２９分

> Before start > Hookup > Setup > Playback > Part Names

1/2˝

(12 mm)

For high-

frequency

For low-

frequency

1 Speaker cable, 2 Subwoofer cable

in case of:

Page 8

Connect front speakers compatible with Bi-Amping

connection to the FRONT jacks and the SURROUND

BACK or HEIGHT jacks. Make sure you remove the

jumper bar fitted between the woofer jacks and tweeter

jacks of the front speakers. In case of Bi-Amping

connection, refer to the instruction manual of your

speakers. Up to two powered subwoofers can be

connected. The same signal is output from each of the

SUBWOOFER jacks.

Make sure the exposed wires of the speakers do not stick out of

the speaker terminals when connecting. If the exposed wires of

the speakers touch the rear panel or the + and – wires touch each

other, the protection circuit will be activated.

Setup

0Bi-Amping connection requires you to change

some settings. Select "Yes" in "Bi-Amp" in "1. Full

Auto MCACC" (



P17) in the Initial Setup.

SN29402193_VSX-101_BAS_En.book 10 ページ２０１６年１月６日　水曜日　午前１２時２９分

Inhaltsverzeichnis

Andere Pioneer Empfänger Handbücher

Pioneer

Pioneer avm-p900ruc Bedienungsanleitung

Pioneer

Pioneer AVH-X7700BT Bedienungsanleitung

Pioneer

Pioneer AVH-ZL5150BT Bedienungsanleitung

Pioneer

Pioneer VSX-1017AV-K Bedienungsanleitung

Pioneer

Pioneer VSX-415-K Bedienungsanleitung

Pioneer

Pioneer VSX-C501-S Bedienungsanleitung

Pioneer

Pioneer ELITE VSX-92TXH Bedienungsanleitung

Pioneer

Pioneer VSX-830-K Bedienungsanleitung

Pioneer

Pioneer VSX-84TXSI - AV Receiver Bedienungsanleitung

Pioneer

Pioneer AVH-2480BT Bedienungsanleitung

Pioneer

Pioneer MVH-S310BT Bedienungsanleitung

Pioneer

Pioneer SC-07 - Elite AV Network Receiver Bedienungsanleitung

Pioneer

Pioneer vsx-421-k Bedienungsanleitung

Pioneer

Pioneer Elite VSX-49TXi Bedienungsanleitung

Pioneer

Pioneer SC-75 Bedienungsanleitung

Pioneer

Pioneer deh-p5900mp Bedienungsanleitung

Pioneer

Pioneer AVH-Z2250BT Bedienungsanleitung

Pioneer

Pioneer Elite VSX-90 Bedienungsanleitung

Pioneer

Pioneer Elite VSX-55TXi Bedienungsanleitung

Pioneer

Pioneer VSX-826-k Bedienungsanleitung

Pioneer

Pioneer DEH-x6500dab Bedienungsanleitung

Pioneer

Pioneer VSX-41kuxji Bedienungsanleitung

Pioneer

Pioneer VSX-917V-S/-K Bedienungsanleitung

Pioneer

Pioneer Elite VSX-49TX Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung