Pioneer SX-10AE Bedienungsanleitung

SX-10AE

STEREO RECEIVER

Instruction Manual

SN29403247_SX-10AE_En_1707XX.book 1 ページ２０１７年７月１９日　水曜日　午後１時５９分

Before Start

Table of Contents

Before Start............................................................. 2

What's in the box .....................................................3

Part Names .............................................................4

Install....................................................................... 8

Step1: Connect the Speakers .................................8

Step2: Connect an other External Device ...............9

Step3: Connect Other Cables ...............................10

Playback ............................................................... 11

Playing Audio from a Connected Device .............. 11

BLUETOOTH

Playback ......................................12

Listening to the AM/FM Radio................................13

Registering a Station ............................................. 15

Naming Radio Stations Registered as Presets ..... 16

Adjusting the Sound Quality ..................................17

Setup ..................................................................... 18

Setup Menu ...........................................................18

Others .................................................................. 21

Troubleshooting .................................................... 21

General Specifications .......................................... 23

> Before Start > Part Names > Install > Playback

Setup | Others

SN29403247_SX-10AE_En_1707XX.book 2 ページ２０１７年７月１９日　水曜日　午後１時５９分

What's in the box

1. Main unit (1)

2. Remote controller (RC-963R) (1), batteries (AAA/R03)

(2)

3. FM indoor antenna (1)

4. AM indoor antenna (1)

≥Instruction Manual (This document) (1)

0Connect speakers with 4 ≠ to 16 ≠ impedance. Note that

when connecting to both SPEAKERS A and B terminals,

connect speakers with 8 ≠ to 16 ≠ impedance to both A

and B.

0The power cord must be connected only after all other

cable connections are completed.

0We will not accept responsibility for damage arising from

the connection of equipment manufactured by other

companies.

0Specifications and appearance are subject to change

without prior notice.

> Before Start > Part Names > Install > Playback

Setup | Others

SN29403247_SX-10AE_En_1707XX.book 3 ページ２０１７年７月１９日　水曜日　午後１時５９分

Part Names

Front Panel

1. ÍSTANDBY/ON button

2. SPEAKERS A/B button: Select the terminals to output audio from between SPEAKERS

A/B.

3. DIRECT button: Switches to the DIRECT mode which outputs pure sound as it was

intended.

4. Display (P5)

5. Remote control sensor: Receives signals from the remote controller.

0The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on

the perpendicular axis and 30° to either side.

6. Bluetooth indicator: Lights when the unit is connected by BLUETOOTH. It will flash during

pairing or if the connection is not correct.

7. MEMORY button: Used to register AM/FM radio stations (P15).

8. TUNING/PRESET button: Switch between the TUNING mode, where you select a

frequency to tune to a station, and the PRESET mode, where you select a preset station.

9. VOLUME

10.

PHONES jack: Connect stereo headphones with a standard plug (Ø1/4z/6.3 mm).

11.

Input Selector buttons: Switches the input to be played.

12.

TONE button: Switches to the TONE mode which enables BASS and TREBLE. After

switching to the TONE mode, press again to see the settings for "Bass", "Treble", and

"P.BASS" with each press.

13.

buttons: Used to tune to AM/FM stations, select preset numbers, and to

adjust the sound quality.

14.

BALANCE button: Adjusts the balance of the sounds output from the left and right

speakers (P17).

> Before Start >PartNames > Install > Playback

Setup | Others



     



SN29403247_SX-10AE_En_1707XX.book 4 ページ２０１７年７月１９日　水曜日　午後１時５９分

> Before Start >PartNames > Install > Playback

Setup | Others

Display

1. The currently selected speaker system lights.

2. Lights when headphones are connected.

3. Lights in the following conditions.

PRESET: PRESET mode has been selected with

TUNING/PRESET on the main unit.

RDS (European and Australian models): Receiving

RDS broadcasting.

AUTO: When tuning mode is auto.

1TUNED2: Receiving AM/FM radio.

FM STEREO: Receiving FM stereo.

4. Flashes when muting is on.

5. Displays radio and a variety of other information.

6. Lights in the following conditions.

SLEEP: Sleep timer has been set.

ASb: Auto Standby has been set.

Hz: May light while "Tuner Setting" in the Setup menu

is being set.









SN29403247_SX-10AE_En_1707XX.book 5 ページ２０１７年７月１９日　水曜日　午後１時５９分

Rear Panel

1. FM UMBAL 75Ω/AM LOOP ANTENNA terminals: Connect the supplied FM indoor

antenna and AM indoor antenna.

2. PRE OUT SUBWOOFER jack: Connect a powered subwoofer with a subwoofer cable.

3. SPEAKERS jacks: Connect speakers with speaker cables. You can connect a set of left

and right speakers to each of the A/B terminals.

4. Power cord

5. AUDIO IN jacks: Input audio signals from an other external device with an analog audio

cable.

6. LINE OUT jacks: Connect a recording device, such as a cassette tape deck. Connect to

the AUDIO IN jacks on the recording device using analog audio cable.

> Before Start >PartNames > Install > Playback

Setup | Others

 





SN29403247_SX-10AE_En_1707XX.book 6 ページ２０１７年７月１９日　水曜日　午後１時５９分

Remote Controller

1. ÍSTANDBY/ON button

2. SLEEP button: Set the sleep timer (P20).

3. INPUT SELECTOR buttons: Switches the input to be played.

4. Numbered buttons

5. DIRECT TUNING button: Use to select the number of a preset station or to directly input

the frequency of the station.

6. button: Temporarily mutes audio. Press again to cancel muting.

7. VOLUME buttons

8. Cursors (Up / Down / Left / Right), ENTER button: Select the item with the cursors and

press ENTER to confirm.

9. SETUP button: You can show advanced setting items on the display to provide you with

an even better experience (P18).

10.

BASS buttons: Enhance or moderate the bass range (P17).

11.

TREBLE buttons: Enhance or moderate the treble range (P17).

12.

DISPLAY button: Switches the information on the display.

13.

DIMMER button: You can adjust the brightness of the display in three steps. It cannot be

turned off completely.

14.

buttons: Select the input to be played. The input changes CD  NETWORK 

LINE 1  LINE 2  FM  AM  BLUETOOTH each time you press the button.

15.

CLEAR button: Deletes all characters you have entered when entering text.

16.

PAIRING button: Used to connect to another BLUETOOTH wireless technology enabled

device (P12).

17.

PRESET buttons: Used to select AM/FM radio stations (P15).

18.

RETURN button: Returns the display to the previous state during setting.

19.

DIRECT button: Switches to the DIRECT mode which outputs pure sound as it was

intended (P17).

20.

TONE button: Switches to the TONE mode which enables BASS and TREBLE (P17).

> Before Start >PartNames > Install > Playback

Setup | Others







































SN29403247_SX-10AE_En_1707XX.book 7 ページ２０１７年７月１９日　水曜日　午後１時５９分

Install

Step1: Connect the Speakers

You can connect two systems, Speaker A and Speaker B,

as the Speaker System. When connecting only one set,

connect to the SPEAKERS A terminals. With one set, use

speakers with 4 ≠ to 16 ≠ impedance.

Note that when connecting to both SPEAKERS A and B

terminals, connect speakers with 8 ≠ to 16 ≠ impedance to

both A and B.

Connect the speaker cable so the wires do not protrude

from the speaker jacks. If the exposed wires of the

speakers touch the rear panel or the + and – wires touch

each other, the protection circuit will be activated.

(*)You can also connect a powered subwoofer to the PRE

OUT SUBWOOFER jack to boost bass playback even

more. Use a subwoofer cable for connection.

> Before Start > Part Names >Install > Playback

Setup | Others

5/8˝

(15 mm)

Speaker B

Speaker A

Right Left Right Left

a Speaker Cable

Setup

0When connected as a Speaker B System, you

can output the same audio as Speaker A System

by switching with A/B/A+B. Press SPEAKER A/B

on the main unit to switch. The selection changes

in the order SPEAKER A, SPEAKER B,

SPEAKER A+B, Off with each press.

0If any of the connected speakers have an

impedance of 4 ≠ or more to less than 6 ≠, or

when a Speaker B system is to be used, press

SETUP (P7) on the remote controller, and set "SP

Impedance" to "4 ohm".

SN29403247_SX-10AE_En_1707XX.book 8 ページ２０１７年７月１９日　水曜日　午後１時５９分

Step2: Connect an other External Device

AUDIO IN connection

Connect an other external device with an analog audio

cable.

> Before Start > Part Names >Install > Playback

Setup | Others

Network Audio

Player

a Analog Audio Cable

SN29403247_SX-10AE_En_1707XX.book 9 ページ２０１７年７月１９日　水曜日　午後１時５９分

Step3: Connect Other Cables

Antenna Hookup

Move the antenna around while playing the radio to find the

position with the best reception.

Power Cord Hookup

The power cord must be connected only after all other

connections are completed.

> Before Start > Part Names >Install > Playback

Setup | Others

(North American

models)

(European and

Australian models)

a FM indoor antenna, b AM indoor antenna

SN29403247_SX-10AE_En_1707XX.book 10 ページ２０１７年７月１９日　水曜日　午後１時５９分

Inhaltsverzeichnis

Andere Pioneer Stereo-Receiver Handbücher

Pioneer

Pioneer VSX-D603S Bedienungsanleitung

Pioneer

Pioneer SPH-DA360DAB Bedienungsanleitung

Pioneer

Pioneer VSX-LX504 Bedienungsanleitung

Pioneer

Pioneer DMH-ZS8290BT Bedienungsanleitung

Pioneer

Pioneer XR-VS400 Bedienungsanleitung

Pioneer

Pioneer AVH-Z7000DAB Bedienungsanleitung

Pioneer

Pioneer AVH P4300DVD Bedienungsanleitung

Pioneer

Pioneer SX-1080 Bedienungsanleitung

Pioneer

Pioneer SPH-DA160DAB Bedienungsanleitung

Pioneer

Pioneer SX-2700 Kurzanleitung

Pioneer

Pioneer AVH-5200DVD Bedienungsanleitung

Pioneer

Pioneer VSX-D1S Bedienungsanleitung

Pioneer

Pioneer AVH-P5900DVD/XN/UC Bedienungsanleitung

Pioneer

Pioneer VSX-D906S Bedienungsanleitung

Pioneer

Pioneer VSX-918V-S Bedienungsanleitung

Pioneer

Pioneer SX-434 Bedienungsanleitung

Pioneer

Pioneer VSX-4000 Bedienungsanleitung

Pioneer

Pioneer SX-535 Bedienungsanleitung

Pioneer

Pioneer VSX-1130-K Bedienungsanleitung

Pioneer

Pioneer VSX-1015-K Bedienungsanleitung

Pioneer

Pioneer AVH-X2800BT Bedienungsanleitung

Pioneer

Pioneer DVH-785AV Bedienungsanleitung

Pioneer

Pioneer DMH-A241 BT Bedienungsanleitung

Pioneer

Pioneer Super Tuner IIID AVH-P3100DVD Bedienungsanleitung

Beliebte Stereo-Receiver Handbücher anderer Marken

Marantz

Marantz CINEMA 70S Bedienungsanleitung

Kenwood

Kenwood KMDX92 Bedienungsanleitung

Yamaha

Yamaha RX-830 Bedienungsanleitung

Yamaha

Yamaha RX-750 Bedienungsanleitung

Denon

Denon AVR-1311 Bedienungsanleitung

Denon

Denon AVR-S760H Bedienungsanleitung

Denon

Denon AVR-X7200W Bedienungsanleitung

Sony

Sony XAV-1500 Bedienungsanleitung

Radio Shack

Radio Shack DX-399 Bedienungsanleitung

Sony

Sony STR-DE535 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Yamaha

Yamaha MusicCast TSR-5B3D Bedienungsanleitung

Sony

Sony STR-DE335 - Fm Stereo/fm-am Receiver Bedienungsanleitung

Sony

Sony STR-DG500 - Multi Channel Av Receiver Bedienungsanleitung

Panasonic

Panasonic AJSD955B - DVCPRO50 STUDIO DECK Bedienungsanleitung

Sherwood

Sherwood S-2660CP Technisches Handbuch

Sony

Sony STR-K790 - Lifier Bedienungsanleitung

Denon

Denon DRA-697CI Bedienungsanleitung

SMART-AVI

SMART-AVI HDX-PRO Series Bedienungsanleitung