Planet ISW-621 Series Bedienungsanleitung

4-Port 10/100Mbps +1/2 100FX Fiber Port

Industrial Fast Ethernet Switch

ISW-511 / ISW-621Series

User's Manual

Trademarks

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work

properly in all environments and applications, and makes no warranty

and representation, either implied or expressed, with respect to

the quality, performance, merchantability, or tness for a particular

purpose.

PLANET has made every effort to ensure that this User’s Manual is

accurate; PLANET disclaims liability for any inaccuracies or omissions

that may have occurred.

Information in this User’s Manual is subject to change without notice

and does not represent a commitment on the part of PLANET. PLANET

assumes no responsibility for any inaccuracies that may be contained in

this User’s Manual. PLANET makes no commitment to update or keep

current the information in this User’s Manual, and reserves the right

to make improvements to this User’s Manual and/or to the products

described in this User’s Manual, at any time without notice.

If you nd information in this manual that is incorrect, misleading, or

incomplete, we would appreciate your comments and suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the Instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may

cause radio interference, in which case the user may be required to

take adequate measures.

WEEE Warning

To avoid the potential effects on the environment and human

health as a result of the presence of hazardous substances in

electrical and electronic equipment, end users of electrical

and electronic equipment should understand the meaning of

the crossed-out wheeled bin symbol. Do not dispose of WEEE as

unsorted municipal waste and have to collect such WEEE separately.

Revision

PLANET 4-Port 10/100Mbps +1/2 100FX Fiber Port Industrial Fast

Ethernet Switch User’s Manual

For Models: ISW-511 / ISW-621 Series

Revision: 1.0 (February, 2009)

Part No: EM-ISW-511_621_v1.0 (2350-AH0150-000)

TABLE OF CONTENTS

1. INTRODUCTION ........................................................................ 6

1.1 Package Contents ............................................................... 6

1.2 How to Use This Manual ..................................................... 6

1.3 Product Features................................................................. 7

Physical Port....................................................................... 7

Layer 2 Features................................................................. 7

Industrial Case / Installation................................................ 8

1.4 Product Specications ......................................................... 9

2. INSTALLATION .........................................................................13

2.1 Product Description.............................................................13

2.1.1 Switch Front Panel ....................................................14

2.1.2 LED Indicators ..........................................................16

2.1.3 Switch Upper Panel ...................................................16

2.1.4 Wiring the Power Inputs ............................................17

2.1.5 Wiring the Fault Alarm Contact...................................18

2.2 Mounting Installation ..........................................................19

2.2.1 Install DIN-Rail Mounting ...........................................19

2.2.2 Wall Mount Plate Mounting.........................................21

3 APPLICATION ...........................................................................22

Installation Steps...............................................................23

4. SWITCH OPERATION.................................................................24

4.1 Address Table....................................................................24

4.2 Learning ...........................................................................24

4.3 Forwarding & Filtering ........................................................24

4.4 Store-and-Forward .............................................................24

4.5 Auto-negotiation ................................................................25

5. TROUBLESHOOTING .................................................................26

APPENDIX A: NETWORKING CONNECTION.......................................27

A.1 Switch’s RJ-45 Pin Assignments ..........................................27

A.2 RJ-45 cable Pin Assignments ..............................................27

1. INTRODUCTION

1.1 Package Contents

Check the contents of your package for following parts:

● Industrial Fast Ethernet Switch x 1

● User's Manual x 1

● DIN Rail Kit x 1

● Wall Mount Kit x 1

If any of these are missing or damaged, please contact your dealer

immediately, if possible, retain the carton including the original packing

material, and use them against to repack the product in case there is a

need to return it to us for repair.

1.2 How to Use This Manual

This Industrial Fast Ethernet Switch User Manual is structured as

follows:

Chapter 2 Installation

The chapter explains the feature, functionality and the physical

installation of the Industrial Fast Ethernet Switch.

Chapter 3 Application

The chapter explains the Industrial Fast Ethernet Switch application.

Chapter 4 Switch operation

The chapter explains the Industrial Fast Ethernet Switch transmit

operation.

Chapter 5 Troubleshooting

The chapter explains the troubleshooting of the Industrial Fast Ethernet

Switch.

Appendix A

This chapter contains cable information of the Industrial Fast Ethernet

Switch.

1.3 Product Features

Physical Port

Model

Name

Ports Fiber Optical

Interface

Copper Optical Mode Distance

ISW-511

4 x 10/100Base-TX

1 x 100Base-FX

Multi-

mode 2km

ISW-511T

ISW-511S15 Single-

mode 15km

ISW-511TS15

ISW-621

2 x 100Base-FX

Multi-

mode 2km

ISW-621T

ISW-621S15 Single-

mode 15km

ISW-621TS15

Layer 2 Features

□ Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX

□ Supports Auto-negotiation and 10/100Mbps half / full duplex mode

for each copper port

□ High performance store and forward architecture, broadcast storm

control, runt/CRC ltering eliminates erroneous packets to optimize

the network bandwidth

□ Prevents packet loss with back pressure (Half-Duplex) and IEEE

802.3x PAUSE frame ow control (Full-Duplex)

□ Backplane (Switching Fabric): ISW-511 Series: 1Gbps, ISW-621

Series: 1.2Gbps

□ Integrated address look-up engine, support 2K absolute MAC

addresses

□ 1Mbit on-chip frame buffer on ISW-511 / ISW-621 Series

□ Automatic address learning and address aging

□ CSMA/CD Protocol

Industrial Case / Installation

□ IP-30 Metal case / Protection

□ DIN Rail and Wall Mount Design

□ 12 to 48V DC, redundant power with polarity reverse protect function

and connective removable terminal block for master and slave power

□ -10 to 60 Degree C operation temperature on ISW-511 / ISW-

511S15 / ISW-621 / ISW-621S15

□ -40 to 75 Degree C operation temperature on ISW-511T / ISW-

511TS15 / ISW-621T / ISW-621TS15

1.4 Product Specications

Model ISW-511 ISW-511S15

Hardware Specication

Copper

Ports 4 x 10/100Base-TX, Auto-negotiation, Auto-MDI/MDI-X

Cable 10Base-T: 2-pair UTP Cat. 3, 4, 5 cable (100meters, max.)

100Base-TX: 2-pair UTP Cat. 5 cable (100meters, max.)

Fiber

Optical

Port 1 x 100Base-FX

Cable 50/125μm or 62.5/125μm ber 9/125μm ber

Mode Multi-mode Single-mode

Distance 2km 15km

Dimensions

(W x D x H) 135mm x 97mm x 32mm

Weight 436g

Power Requirement 12~48 VDC,

Redundant power with polarity reverse protection function

Power Consumption

/ Dissipation 9.1 Watts / 31BTU

Installation DIN rail kit and wall mount ear

Switch Specication

Switch Processing

Scheme Store-and-Forward

Address Table 2K entries

Buffer 1Mbit

Flow Control Back pressure for half duplex,

IEEE 802.3x Pause Frame for full duplex

Switch Fabric 1Gbps

Throughput

(Packet Per Second) 0.74Mpps @ 64Bytes

Standards Conformance

Standards

Compliance

IEEE 802.3 Ethernet, 10Base-T

IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX

IEEE 802.3x Full-duplex ow control

Temperature Operating: -10~60 Degree C

Storage: -40~85 Degree C

Humidity Operating Operating: 5% to 90%, Storage: 5% to 90% (Non-condensing)

Regulation

Compliance FCC Part 15 Class A, CE

Model ISW-511T ISW-511TS15

Hardware Specication

Copper

Ports 4 x 10/100Base-TX, Auto-negotiation, Auto-MDI/MDI-X

Cable 10Base-T: 2-pair UTP Cat. 3, 4, 5 cable (100meters, max.)

100Base-TX: 2-pair UTP Cat. 5 cable (100meters, max.)

Fiber

Optical

Port 1 x 100Base-FX

Cable 50/125μm or 62.5/125μm ber 9/125μm ber

Mode Multi-mode Single-mode

Distance 2km 15km

Dimensions

(W x D x H) 135mm x 97mm x 32mm

Weight 436g

Power Requirement 12~48 VDC,

Redundant power with polarity reverse protection function

Power Consumption

/ Dissipation 9.1 Watts / 31BTU

Installation DIN rail kit and wall mount ear

Switch Specication

Switch Processing

Scheme Store-and-Forward

Address Table 2K entries

Buffer 1Mbit

Flow Control Back pressure for half duplex,

IEEE 802.3x Pause Frame for full duplex

Switch Fabric 1Gbps

Throughput

(Packet Per Second) 0.74Mpps @ 64Bytes

Standards Conformance

Standards

Compliance

IEEE 802.3 Ethernet, 10Base-T

IEEE 802.3u Fast Ethernet, 100Base-TX, 100Base-FX

IEEE 802.3x Full-duplex ow control

Temperature Operating: -40~75 Degree C

Storage: -40~85 Degree C

Humidity Operating Operating: 5% to 90%, Storage: 5% to 90% (Non-condensing)

Regulation

Compliance FCC Part 15 Class A, CE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Planet Netzwerk-Router Handbücher

Planet

Planet VIP-280 Bedienungsanleitung

Planet

Planet FGSW-2402VS Bedienungsanleitung

Planet

Planet VC-234G Bedienungsanleitung

Planet

Planet FGSW-1602 Bedienungsanleitung

Planet

Planet EPN-104 Bedienungsanleitung

Planet

Planet VRT-402N Bedienungsanleitung

Planet

Planet Powerline Ethernet Bridge PL-104E Bedienungsanleitung

Planet

Planet ADSL Firewall Router ADE-4120 Bedienungsanleitung

Planet

Planet FNSW-4800v2 Bedienungsanleitung

Planet

Planet SW-504 Bedienungsanleitung

Planet

Planet WGSD-10020 Bedienungsanleitung

Planet

Planet RT-101 Bedienungsanleitung

Planet

Planet XRT-401B Bedienungsanleitung

Planet

Planet ADE-4400 Bedienungsanleitung

Planet

Planet WGS3-24000 Bedienungsanleitung

Planet

Planet WDRT-1800AX Bedienungsanleitung

Planet

Planet FSD-804PS Bedienungsanleitung

Planet

Planet ADSL 2/2+ VoIP Router IAD-200W Bedienungsanleitung

Planet

Planet IVR-100 Series Bedienungsanleitung

Planet

Planet EH-2400 Bedienungsanleitung

Planet

Planet FNSW-1601 Bedienungsanleitung

Planet

Planet FSD-1603 Bedienungsanleitung

Planet

Planet ADSL 2/2+ VPN Firewall Router ADE-4300A/B Bedienungsanleitung

Planet

Planet XRT-401F Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise