Pool Blaster IVac M3 Bedienungsanleitung

Installation Guide - NiMH to Lithium

Need Help? Contact Customer Care at (732) 967-9888

Upgrading the Pool Blaster® iVac M3 Motor Box

Why did my new motor box kit come with a charger?

This complete kit replaces all of the electronics for the Pool

Blaster® iVac M3 and will guarantee that your machine will

be repaired and increase the longevity of your battery.

Your old charger will not work. Please dispose of

your original charger.

No cover needed

Your new kit includes:

Motor Box with ON/OFF Button (P30X003LI)

Charger (LC099-3S-US-EU)

You will need the following tools:

Phillips screwdriver or battery

powered screwdriver and a cutting tool

(set drill at low torque setting)

STEP 1: Place the unit on a workbench

with the ON/OFF knob facing up. Note the

screw locations shown above. 4 screws on

the main body and 1 small screw on the

bottom right.

STEP 2: Using cutters, cut the lanyard and

unscrew the ON / OFF Knob. Discard it as it

won’t be needed anymore.

Installation Guide - NiMH to Lithium

Need Help? Contact Customer Care at (732) 967-9888

Upgrading the Pool Blaster® iVac M3 Motor Box

STEP 3: Remove the 4 screws on the main

body.

STEP 4: Using a screwdriver, remove the

small screw as shown above.

STEP 5: Separate the shells until you have

access to the motor box. Remove the old

motor box and discard it as per your town’s

recycling regulations.

STEP 6: Make sure to grab the shell where

the old motor box was and face it down as

shown in the image above.

Installation Guide - NiMH to Lithium

Need Help? Contact Customer Care at (732) 967-9888

Upgrading the Pool Blaster® iVac M3 Motor Box

STEP 7: Grab the new motor box. Note that

the ON / OFF button does not need a cover

as the design makes the motor box sealed

to prevent water damage.

STEP 8: Place the new motor box into the

shell.

STEP 9: Grab the other half of the shell

and connect the two shells. Screw back the

main body screws.

STEP 10: Last, using a screwdriver, screw

the small screw back in.

Installation Guide - NiMH to Lithium

Need Help? Contact Customer Care at (732) 967-9888

Upgrading the Pool Blaster® iVac M3 Motor Box

STEP 11: Finally, attach the charging adapter

to the unit to make sure it ts securely.

Rev.: 4262018

http://watertechcorp.com/switch

How to properly charge your unit

Andere Pool Blaster Staubsauger Handbücher

Pool Blaster

Pool Blaster HYDRO 100 14051AL Bedienungsanleitung

Pool Blaster

Pool Blaster Rush X21 Bedienungsanleitung

Pool Blaster

Pool Blaster AQUA BROOM XL ULTRA Bedienungsanleitung

Pool Blaster

Pool Blaster HYDRO 100 Bedienungsanleitung

Pool Blaster

Pool Blaster AQUA BROOM SWEEP XL Bedienungsanleitung

Pool Blaster

Pool Blaster Speed Vac Turbo 26000SL Bedienungsanleitung

Pool Blaster

Pool Blaster MAX Li 30000ML Bedienungsanleitung

Pool Blaster

Pool Blaster MAX CG 31000KL Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Pool Blaster iVac M3 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken