POSIFLEX TX-2101 Bedienungsanleitung

Package Contents

TX-2000/2100/2101 POS box (x 1)

12VDC/40W power adaptor (x 1)

Power cord (x 1)

User manual (x 1)

Product Features

Compact size to suit various applications

Optional internal Wi-Fi

6 USB 2.0 external ports for TX-2000/2100

4 USB 2.0 and 2 USB 3.0 external ports for TX-2101

Dual DSub VGA port

Fan-less system

14560900060 Ver. D0

http://www.posiflex.com

TX-2000/2100/2101

Fanfree POS Box User Manual

SOME IMPORTANT NOTES

FCC NOTES

This system meets industry & government requirements and applicable

standards. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions

manual, may cause interference to radio communications. It has been tested

and found to comply with limits for a Class A digital device pursuant to

subpart B of Part 15 of FCC Rules, which are designed to provide reasonable

protection against interference when operated in a commercial environment.

Operation of this equipment in a residential area is likely to cause interference

in which case the user at his own expense will be required to take whatever

measures to correct the interference.

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

CE CLASS A WARNING

This equipment is compliant with Class A of CISPR 32. In a residential

environment this equipment may cause radio interference.

WARRANTY LIMITS

Warranty will terminate automatically when the machine is opened by any

person other than the authorized technicians. The user should consult his/her

dealer for the problem happening. Warranty voids if the user does not follow

the instructions in application of this merchandise. The manufacturer is by no

means responsible for any damage or hazard caused by improper application.

警告使用者

這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情

況下，使用者會被要求採取某些適當的對策。

Views of the TX-2000/2100/2101

Front View

Rear View

TX-2000/2100

TX-2101

I/O Interface

Bottom View

View of Rear I/O Interface of TX-2000/2100/2101

TX-2000/2100

Line out

USB 2.0 port

RJ45 LAN port

Dual DSub VGA port

COM (DB9) port

(COM 1 / COM 2)

COM (RJ50) port

(COM 3 / COM 4)

LPT Port

12VDC-IN power jack

RJ11 cash drawer (CR) port

Rubber Pad

DRAM Cover

TX-2101

Line out

HDMI port

USB 2.0 port

RJ45 LAN port

Dual DSub VGA port

COM (DB9) port

(COM 1 / COM 2)

COM (RJ50) port

(COM 3 / COM 4)

LPT Port

12VDC-IN power jack

RJ11 cash drawer (CR) port

USB 3.0 port

Connecting Power Adapter and I/O Cables

To have the terminal ready for operation, please connect the connector

of power adapter and all of the connectors of required I/O cables

respectively to the 12VDC-IN power jack and appropriate I/O ports.

Please make sure that each of the cables is fully connected to the

correct port. Damages due to incorrect connection or orientation are not

covered by product warranty!

Some cable connectors like the connectors of COM (RJ50) or LAN or

cash drawer (CR) cables have to be gently inserted until a click sound is

given. It is recommended that the I/O ports, such as COM (DB9) port

and VGA port, should be fastened with connector thumb screws after

the I/O cable connectors are completely connected. And please make

sure that each connector has to be connected to the right peripheral

device in the right way.

CAUTION: On doing insertion or extraction of a cable

connector, please always hold the connector head

itself instead of pulling the cable wire. Doing this

could damage the cables, which is considered as

an artificial damage and is not covered by the

warranty.

Note: The COM ports of TX-2000/2100/2101 do not supply power by

default. To make the COM ports supply 5VDC or 12VDC power,

you can set up the COM ports through jumper setting.

The VGA port of TX-2000/2100/2101 can supply +12VDC

power through jumper setting for Posiflex LCD monitor.

Nevertheless, except Posiflex peripheral device, do not connect

any other device to this port.

Installing Optional Peripheral Devices

Posiflex TX-2000/2100/2101 can work with multiple optional

peripheral devices, such as LCD monitor, cash drawer and the like.

Before installing an optional peripheral device, make sure that the

system is powered off and the external power source is removed from

the POS box to prevent electric hazard! Failure to follow the warning

description will void the product warranty!

For the detailed instruction, refer to each of the user manuals of the

optional peripheral devices.

Memory Upgrade

The TX-series system is provided with a DRAM slot for you to

expand or replace memory. Before shipping, a DRAM memory

has been inserted into the slot of the main board. To expand or

replace memory, follow 3 steps below.

1. Loosen and remove the screw from the

DRAM cover.

2. Remove the DRAM cover.

3. Replace the existing memory module.

To avoid users from damaging the main board of the system, it is

highly recommended that the memory expansion and replacement

are implemented by professional technicians.

Mounting the TX-2000/2100/2101 on the Wall (Optional)

1. Fix the wall mount bracket onto the wall

by using attached plastic anchors and

screws.

2. Do spiral insertion of 4 screw bolts into

the 4 screw bolt holes.

3. Lineup the 4 screw bolts to be inserted

into the 4 tracks. Then slide downwards

the system along the track until a click

sound is given for completely mounting

the system with the bracket on the wall.

For detailed installation description, please refer to the WB-4200

bracket installation guide.

Powering ON TX-2000/2100/2101

Then press the power button to power on the TX-

2000/2100/2101. To power it off, press the button

again.

Once powering off the system, if you want to

power it on again, please wait at least 3 seconds.

If the system hangs due to a reason, such as software resource

conflict, please press and hold the power button for 10 seconds

around to forcedly shut down the system.

Power Status LED Indicator

There is a power status LED indicators on the front side of the TX-

2000/2100/2101. After powering ON the TX-2000/2100/2101, you can

read the system operation status from the power status LED indicator.

The power LED status is described below.

LED

Status

Description

POWER

Solid green

System power ON

Solid red

System standby

Installing an Operating System

This product is highly professional equipment. Therefore, we do NOT

encourage you to install any operating system into this machine without

professional assistance. Posiflex Technology, Inc. shall not be

responsible for any technical support to questions on this aspect. We

suggest that you contact your dealer for OS installation.

Operating System Recovery

For the TX-2000/2100/2101 main system preloaded with an operating

system on HDD or SSD, Posiflex provides a recovery DVD shipped

with the main system for the preloaded operating system. The system

integrator shall take care of software restoration after the OS is

recovered.

If you plan to recover your operating system, we do NOT encourage

you to recover any operating system by yourself. Please contact your

service center for operating system recovery.

Operation Environment

Do NOT operate this terminal in an environment of poor ventilation.

During operation of the terminal, to avoid this terminal from

overheating, keep at least proper air clearance away from this terminal

for adequate air traffic.

Specifications

TX-2000

TX-2100

TX-2101

Processor

Intel® Baytrail-D,

J1800 (Default)

Intel® Baytrail-M,

N2807 (Option)

Intel® Baytrail-D, J1900

System Memory

DDR3L SO-DIMM socket x 1, up to 4GB

Storage Device

1 x SATA + 1 x

eMMC +1 x

MSATA Slot

1 x SATA port + 1 x eMMC

Power Supply

12V/40W, capable of being upgraded to 12V/60W or 12V/80W

OS support

POSReady 7 / Windows 7 / WIN 8.1 Industry / Windows 10 IoT

/ DOS

BIOS

INSYDE

Serial Port

2 x DB-9 ports+ 2 x RJ-50 ports

Parallel Port

1 x DB-25 connector

Standard USB

Port

6 x USB 2.0 External Ports+ 1 x USB 2.0

Internal Port

4 x USB 2.0 + 2 x

USB 3.0 External

Ports + 1 x USB

2.0 Internal Port

LAN Port

1 x 10 /100 /1000 Mb

Display Port

2 x VGA ports

2 x VGA ports + 1

x HDMI Port

CR Port

1 port, controlling 1 CR

PS/2 Port

1 port, on the front panel

DC Jack

1 port

Expansion Slot

1 x PCIe

Audio

Line out

mini-PCIe

mini-PCIe slot for WIFI module

LED Indicator

Bi-color power status LED indicator

TX-2000

TX-2100

TX-2101

WIFI/BT

802.11 b/g/n (WIFI + BT combo card for optional with two

antenna sets)

Environmental

Requirements

Operating :

0°C - 40°C, 20%RH - 90%RH

Storage :

-20°C - 70°C, 10%RH - 90%RH

※The product information and specifications are subject to change without prior

notice. To get the detailed information on TX-2000/2100/2101, please check this

model from Posiflex Global Website

(http://www.posiflex.com/en-global/Download/download).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere POSIFLEX Touch-Terminal Handbücher

POSIFLEX

POSIFLEX TX-4200 Bedienungsanleitung

POSIFLEX

POSIFLEX Jiva LT-5600 Bedienungsanleitung

POSIFLEX

POSIFLEX Jiva TP-8000 Bedienungsanleitung

POSIFLEX

POSIFLEX MT-4210A Bedienungsanleitung

POSIFLEX

POSIFLEX HS-3510W-E Bedienungsanleitung

POSIFLEX

POSIFLEX JIVA TP-5700 Bedienungsanleitung

POSIFLEX

POSIFLEX PS-3416 Bedienungsanleitung

POSIFLEX

POSIFLEX RT-2015-G2 Bedienungsanleitung

POSIFLEX

POSIFLEX MT-4308W Series Bedienungsanleitung

POSIFLEX

POSIFLEX HT-3200 SERIES Bedienungsanleitung

POSIFLEX

POSIFLEX KS - 6915 Bedienungsanleitung

POSIFLEX

POSIFLEX KS - 6810 Bedienungsanleitung

POSIFLEX

POSIFLEX HC-1621IR Bedienungsanleitung

POSIFLEX

POSIFLEX KS - 6910 series Bedienungsanleitung

POSIFLEX

POSIFLEX HT-4600 Series Bedienungsanleitung

POSIFLEX

POSIFLEX TX-5300 Bedienungsanleitung

POSIFLEX

POSIFLEX TX-3700 Series Bedienungsanleitung

POSIFLEX

POSIFLEX KS - 6815 Bedienungsanleitung

POSIFLEX

POSIFLEX KS-6812A Bedienungsanleitung

POSIFLEX

POSIFLEX JIVA HS-2410W Bedienungsanleitung

POSIFLEX

POSIFLEX XP-3000 Series Bedienungsanleitung

POSIFLEX

POSIFLEX XT-3817 Bedienungsanleitung

POSIFLEX

POSIFLEX Jiva KS-6615 Series Bedienungsanleitung

POSIFLEX

POSIFLEX XT-4015 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung