PowerWalker VI 500T/HID Bedienungsanleitung

Line Interactive UPS

PowerWalker VI 500T/HID

PowerWalker VI 750T/HID

PowerWalker VI 1000T/HID

PowerWalker VI 1500T/HID

Quick Start Guide

CONTENT

IMPORTANT SAFETY INSTRUCTIONS......................................................1

1. Introduction...............................................................................................4

2. Description of Features.............................................................................4

3. Package Contents ....................................................................................4

4. Product Overview .....................................................................................5

5. Installation and Initial Startup....................................................................7

6. Functions & Operation............................................................................10

7. Software Installation on your PC ............................................................11

8. Maintenance ...........................................................................................12

9. Trouble Shooting.....................................................................................14

10. Specifications........................................................................................15

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS –This manual contains important instructions

for models PowerWalker VI 500T/HID, 750T/HID, 1000T/HID, 1500T/HID

that should be followed during installation and maintenance of the UPS and

batteries.

This product is specially designed for PCs and it is not recommended for

use in any medical equipment, life-supporting system and other specific

important equipment.

Do not plug household appliances such as hair dryers, microwave ovens

or vacuum cleaners to UPS.

Do not attach a power strip or surge suppressor to the UPS.

Do not plug the UPS into its own output.

Connection to any other type of receptable other than two-pole, three-wire

grounded receptacle may result in shock hazard as well as violate local

electrical codes.

To reduce risk of overheating the UPS, do not cover the UPS´ cooling

vents.

This unit intended for installation in a controlled environment (temperature

controlled, indoor area free of conductive contaminants). Avoid installing

the UPS in locations where there is standing or running water or

excessive humidity and do not use it in any of the following environments:

oAny area with combustible gas, corrosive substance or heavy dust.

oAny area with extraordinarily high or low temperature (above 40˚C or

below 0˚C) and humidity of more than 90%.

oAny area exposed to direct sunshine or near any heating apparatus.

oAny area with serious vibrations.

oOutdoor.

The utility power outlet shall be near the equipment and easily accessible.

In the event of an emergency, press OFF button and disconnect the

power cord from theAC power supply to properly disable the UPS.

The internal short circuiting of the UPS will lead to dangers such as

electric shock or fire; therefore do not allow liquids or any foreign object to

enter the UPS. No water containers (such as a water glass) or any other

liquid-containing vessels shall be placed on the top of the UPS so as to

avoid such dangers as electric shock.

Please do not use the UPS in excess of the rated load capacity.

Unplug the UPS prior to cleaning and do not use liquid or spray detergent.

Risk of electric shock, do not attempt to disassemble the unit. No user

serviceable parts inside. Refer servicing to qualified service personnel.

If UPS is to be stored for a long time, it is recommended to recharge the

batteries (by connecting the utility power to UPS, switch “ON”), once a

month for 24 hours to avoid a full battery discharge.

In case smoke is found coming out from the device, please cut off the

power supply quickly and contact the distributor.

The UPS contains one/two large-capacity batteries. So the shell shall not

be opened, otherwise such dangers as electric shock will be caused. If

any internal overhaul or replacement of the battery is required, please

contact the distributor.

Servicing of batteries should be performed or supervised by personnel

knowledgeable of batteries and the required precautions. Keep

unauthorized personnel away from batteries.

A battery can present a risk of electrical shock and high short circuit

current. The following precautions should be observed when working on

batteries:

oRemove watches, rings, or other metal objects from the hand.

oUse tools with insulated handles and wear rubber gloves and boots.

oDo not lay tools or metal parts on top of batteries.

oDisconnect charging source prior connecting or disconnecting

batteries terminals.

When replacing batteries, replace with the same type and number of the

sealed lead-acid batteries.

The maximum ambient temperature rating is 40°C.

Do not dispose of battery or batteries in a fire. The battery may explode.

Do not open or mutilate the battery or batteries. Released electrolyte is

harmful to the skin and eyes. It may be toxic.

Icon Φ on the rating label stands for phase symbol.

This pluggable type A equipment with battery already installed by the

supplier is operator installable and may be operated by laymen.

During the installation of this equipment it should be assured that the sum

of the leakage currents of the UPS and the connected loads does not

exceed 3.5mA.

Attention, hazardous through electric shock. Also with disconnection of

this unit from the mains, hazardous voltage still may be accessible

through supply from battery. The battery supply should be therefore

disconnected in the plus and minus pole of the battery when maintenance

or service work inside the UPS is necessary.

In the event that there is fire occurring in the vicinity, please use

dry-power extinguishers. The use of liquid extinguishers may give rise to

the danger of electric shock.

This product complies with the safety and environmental regulations in

EU.

If the time arises to throw away your product, please recycle all the

components possible. Batteries and rechargeable batteries are not to be

disposed in your domestic waste! Please recycle them at your local recycling

point. Together we can help to protect the environment.

1. Introduction

PowerWalker VI series is an intelligent and compact line interactive UPS

(Uninterruptable Power Supply) which is designed to protect your personal

computer or sensitive electronic equipments from all forms of power

interference, including complete power failures. It is equipped with many

features that allow any attached equipment to operate longer and more

reliability.

2. Description of Features

Easy to use and install utilized microprocessor control to maximize the

reliability and efficiency

Equipped with built-in boost and buck AVR function

DC Cold start function

Green Power Function for energy saving

Auto restart while AC recovery.

Provides AC Overload protection

RJ11/RJ45 (in/out) LAN/Modem/Phone line protection

3. Package Contents

You should have received the following items inside of package:

UPS Unit

USB Cable

AC Input Power Cord

AC output Power cord

Software CD

User Manual

Warranty Card

4. Product Overview

I: Front Panel:

II: Rear Panel:

VI 500T/750T

VI 1000T/1500T

AC input

RJ11/RJ45 LAN/Modem/phone

line protection

USB port

IEC outlet

AC input

RJ11/RJ45 LAN/Modem/phone

line protection

USB port

IEC outlet

Fan

ON/OFF button

Scroll down button

Mute button

LCD display

III: LCD description:

IV: UPS setting through the LCD:

Release scroll down button to select menu

Example of setting

Save the new value

LCD will shut off if there is no activity for 3 minutes.

(1) In low sensitivity mode (Lo) UPS will tolerate more fluctuations in power

and will go on battery power less often. If the connected load is sensitive to

power disturbances, keep the sensitivity as Standard (Std).

UPS ON

AVR mode

Battery mode

Internal fault

Output load level

Battery level

Input measurements

Output measurements

Measuring unit

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere PowerWalker UPS Handbücher

PowerWalker

PowerWalker 1000 LCD/UK Bedienungsanleitung

PowerWalker

PowerWalker Basic VI SB Series Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000R LCD Bedienungsanleitung

PowerWalker

PowerWalker VI THID Series Bedienungsanleitung

PowerWalker

PowerWalker VFI 6000 TGB Bedienungsanleitung

PowerWalker

PowerWalker VFI 10000TCP 3/1 Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000T/E LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI 160K CPG 3/3 BX Bedienungsanleitung

PowerWalker

PowerWalker VFI 10000CP 3/3 Bedienungsanleitung

PowerWalker

PowerWalker VI 400 Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000RM LCD Bedienungsanleitung

PowerWalker

PowerWalker VI 1000RT/LE Bedienungsanleitung

PowerWalker

PowerWalker VI RT HID Series Bedienungsanleitung

PowerWalker

PowerWalker VI CW Series Bedienungsanleitung

PowerWalker

PowerWalker VI CSW Series Bedienungsanleitung

PowerWalker

PowerWalker VFI 3/3 Series Bedienungsanleitung

PowerWalker

PowerWalker VFI 20000-40000TAP 3/3 BI Bedienungsanleitung

PowerWalker

PowerWalker VI 650SE LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI 6000CRM LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000 LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI ICT IoT Series Bedienungsanleitung

PowerWalker

PowerWalker VFI 10000P/RT LCD Bedienungsanleitung

PowerWalker

PowerWalker VFI CPG PF1 3/3 Series Bedienungsanleitung

PowerWalker

PowerWalker VFI 1000 RMG PF1 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

Eaton

Eaton 3S Montageanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung