Princeton LCD15 Bedienungsanleitung

15" Flat Panel Display

REFERENCE GUIDE

Precautions

•Read all of these instructions and save them for later use.

•Follow all warnings and instructions on the product.

•Product

-Do not cover or block the vent holes in the case.

-Do not insert sharp objects or spill liquid into the LCD monitor

through cabinet slots. They may cause accident fire, electric shock or

failure.

-Disconnect the power plug from the AC outlet if you will not use it

for an indefinite period of time.

-Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or

other risks.

-Do not touch the screen directly with your fingers. You may damage

the screen, and oil from your skin is difficult to move.

-Do not apply pressure to the screen. The LCD is very delicate.

•Power

-Use the type of power indicated on the marking label.

•Plugs

-Do not remove any of the prongs of the monitor's three-pronged

power plug.

-Disconnect the power plug from the AC outlet under following

conditions:

uIf you will not use it for an indefinite period time.

uWhen the power cord or plug is damaged or frayed.

uIf the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions. Improper adjustment

of other controls may result in damage and will often require

extensive work by a qualified technician to restore the

product to normal operation.

uIf the product has been dropped or the cabinet has been

damaged.

uIf the product exhibits a distinct change in performance,

indicating a need for service.

•Power and extension cords

-Do not allow anything to rest on the power cord.

-Do not locate this product where persons will walk on the cord.

-Use the proper power cord with correct attachment plug type. If the

power source is 120 V AC, use a power cord that has UL and C-UL

approvals. If the power source is a 240 V AC supply, use the tandem

(T blade) type attachment plug with ground conductor power cord

that meets the respective European country's safety regulations, such

as VDE for Germany.

-Do not overload wall outlets or power cords. Ensure that the total of

all units plugged into the wall outlet does not exceed 10 amperes.

-Ensure that the total ampere ratings on all units plugged into the

extension cord is not above the cord's rating.

-If the power supply cord, which came with your monitor, is to be

connected to the PC instead of the wall outlet, this equipment is to be

used with UL/TÜV approved computers with receptacle rated

100~240V AC, 50/60Hz, 1.0A (minimum).

•Environment

-Place the monitor on a flat and leveled surface.

-Place the monitor in a well-ventilated place.

-Keep the monitor away from:

overly hot, cold or humid places, places directly under sunlight, dusty

surroundings, equipment that generate strong magnetic fields.

Federal Communication Commission

Radio Frequency

International Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more the following measures:

•Reorient / Relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Notice:

The use of non-shielded interface with this equipment is prohibited.

If necessary, the user should consult the dealer or an experienced radio /

television technician for additional suggestions. The user may find the

following booklet prepared by the Federal Communications Commission

helpful. This booklet is available from the U.S. Government Printing

Office Washington DC, 20402, Stock No. 004-000-00345-4.

The manufacture is not responsible for any radio or TV interference

caused by unauthorized modification of this equipment. It is the

responsibility of the user to correct such interference.

Caution: To meet FCC limits for a Class B computing device, a

shielded signal cable should be used.

Canadian Department Of

Communications Compliance

Statement

This equipment does not exceed Class B limits per radio noise emissions

for a digital apparatus, set out in the Radio Interference Regulation of the

Canadian Department of Communications. Operation in a residential area

may cause unacceptable interference to radio and TV reception requiring

the owner or operator to take whatever steps necessary to correct the

interference.

Product Description

Congratulations on your purchasing this flat panel monitor of new

generation. Your LCD monitor incorporates high quality display into a

small light weighted module. It has power-saving capabilities and emits

no X-ray radiation. You will certainly benefit from this monitor in lots of

ways; to name some of them, comfort, safety, health, and environmental

protection.

This LCD monitor incorporates 15” color active matrix thin-film-

transistor (TFT) liquid crystal display to provide superior display

performance. A maximum resolution of XGA 1024x768 is ideal for

displaying complex graphics and high definition images. Other

outstanding designs that enhance this LCD monitor’s performance are

Plug & Play compatibility, audio system and OSD (On Screen Display)

controls.

Package Contents

Included with your LCD monitor are following items:

•15” TFT liquid crystal display monitor

•D-sub 15 pin signal cable

•AC power cable

•Audio cable

•This user’s manual

Product Features

lHigh contrast color TFT LCD display support resolution up to XGA

1024x768. Compatible with IBMVGA, VESA, and Macintosh

standards.

lImbedded audio system provides sound performance.

lPower management system conforms to VESADPMSstandard.

lEmbedded universal power system.

lSupport DDC1/2B for Plug & Play compatibility.

lAdvanced OSD control for picture quality adjustment.

lDetachable stand for wall-mounting application.

lEquipped with TCO selection.

Cleaning

lGently wipe the screen with a clean camel hair lens brush, or a soft,

clean, lint-free cloth. This removes dust and other particles that can

scratch the screen.

lDo not apply pressure to the screen surface when wiping it clean.

lDo not pour or spray any liquid directly onto the screen or case of

the LCD monitor. Chemical cleaners have been reported to damage

the screen or case of the LCD monitor.

Taking a Look

Front View

1. Power Switch Pressing this button turns the display system power

on or off.

2. Power LED This LED indicates different status when this unit

operates in different modes.

3. Menu/Select Pressing this button pops up the OSD menus on

the screen, and used to select (“Up” direction) the OSD control

options on the screen.

4. Menu/Select Pressing this button pops up the OSD menus on

the screen, and used to select (“Down” direction) the OSD control

options on the screen.

5. ++ This button is used to adjust the increasing value of the selected

OSD control option.

6. −− This button is used to adjust the decreasing value of the selected

OSD control option.

Rear View

1. Power Connector This is for connecting the power cable.

2. Signal Connector This can be connected with the D-sub 15 pin

signal connector.

3. Audio In This can be connected to the audio-out connector of the

computer.

WARNING When you disconnect the cord/cables,

be sure to hold the connector instead of the wire part.

1. Connect one end of the power cord to the monitor and the other end

to the AC outlet. (Œ)

2. Connect one end of the signal cable to the rear side of computer and

the other to the LCD monitor. Tighten by turning clockwise the two

thumb screws to ensure proper grounding. (•)

3. Connect either end of the audio cable to the Audio In connector on

the monitor and the other end to the audio-out connector of your

computer (Ž)

4. Pressing the power button on front panel turns the display system

power on. (•)

Inhaltsverzeichnis

Andere Princeton Monitor Handbücher

Princeton

Princeton EO710F Bedienungsanleitung

Princeton

Princeton SENergy 714 Bedienungsanleitung

Princeton

Princeton LCD1908 Montageanleitung

Princeton

Princeton VL1919 Montageanleitung

Princeton

Princeton VL1514 Bedienungsanleitung

Princeton

Princeton VL2018W Montageanleitung

Princeton

Princeton LCD17M Bedienungsanleitung

Princeton

Princeton LCD1711 Montageanleitung

Princeton

Princeton W2200PD Montageanleitung

Princeton

Princeton LCD Flat Panel TV LCD 1911 Montageanleitung

Princeton

Princeton ULTRA97 Bedienungsanleitung

Princeton

Princeton VL2418W Montageanleitung

Princeton

Princeton VL1919 Bedienungsanleitung

Princeton

Princeton LCD1950 Bedienungsanleitung

Princeton

Princeton AGX700 Bedienungsanleitung

Princeton

Princeton LCD Flat Panel TV PD Montageanleitung

Princeton

Princeton 1700PD Montageanleitung

Princeton

Princeton LCD17D Bedienungsanleitung

Princeton

Princeton VL2018W Bedienungsanleitung

Princeton

Princeton SENERGY2383 Bedienungsanleitung

Princeton

Princeton LCD Flat Panel TV LCD 1708 Montageanleitung

Princeton

Princeton LCD1700 Bedienungsanleitung

Princeton

Princeton LCD2000 Bedienungsanleitung

Princeton

Princeton LCD1711 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung