Princeton LCD17M Bedienungsanleitung

15” Flat Panel Display

1 7 ” F L A T P A N E L D I S P L A Y

LCD1M7

part without the written consent of Princeton Graphic Systems, Inc. Princeton Graphic Systems, Inc. is not

responsible for printing or clerical errors. Product designs and specifications are subject to change without

notice. Windows® is a registered trademark of Microsoft Corporation. Apple® and Macintosh™ are a registered

trademark of Apple Computer, Inc. Sun® SPARCStation™ is a registered trademark of Sun Microsystems Inc.

ENERGY STAR® is U.S. registered mark. As an ENERGY STAR® Partner, Princeton Graphic Systems, Inc. has

determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Table of Contents

FCC Compliance Statement

Safety Instructions

Installation

Controls & Functions

Specifications

Display Mode

Troubleshooting

This equipment has been tested and found to comply with the limits for a Class B digital device,

Pursuant to part 15 of the Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient/Relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may cause harmful interference.

(2) This device must accept any interference received, including interference

that may cause undesired operation.

NOTE: To meet FCC limits for a Class B computing device, a shielded signal cable should

be used.

FCC Compliance Statement

Canadian Compliance Statement

This equipment does not exceed Class B limits per radio noise emissions for a digital

apparatus, set out in the Radio Interference Regulation of the Canadian Department of

Communications. Operation in a residential area may cause unacceptable interference to

radio and TV reception requiring the owner or operator to take whatever steps necessary

to correct the interference.

Safety Instructions

Power

• Use the type of power indicated on the marking label.

Plugs

• Do not remove any parts of the Display’s three-pronged power plug.

• Disconnect the power plug from the AC outlet when the Display will not be used

for an indefinite period of time.

Power and extension cords

• Use the proper power cord with the correct plug type. If the power source is 120Vac, use

a power cord that has UL and CSA approvals. If the power source is a 240Vac supply, use

the tandem (t blade) type attachment plug with a ground conductor power cord that meets

the respective European country’s safety regulations, such as VDE for Germany.

• We recommend using the power cord supplied with the product. However, if

another type of power cord is required, power cord H05VV-F or VW-1, 18AWG x 3G

should be used.

• Do not overload wall outlets or power cords. Be sure that the total of all units plugged

into the wall outlet does not exceed 7 amperes.

• Be sure that the total ampere ratings on all units plugged into the extension cord does

not exceed the rating of the cord.

• If the Display power supply cord requires a connection to the PC instead of the wall

outlet, this equipment is to be used with a UL approved computer which has a receptacle

rated of 100-240vac, 50/60Hz, (minimum).

Environment

• Place the Display on a flat and level surface.

• Place the Display in a well-ventilated area.

• Keep the Display away from water, excessive heat, cold, or humidity.

Installation

The LCD17M display incorporates a 17” color active matrix thin-film-transistor (TFT)

liquid crystal display to provide superior display performance. A maximum resolution

of SXGA 1280x1024 is ideal for displaying graphics and images. Other outstanding

features that enhance this LCD Display’s performance are Plug & Play compatibility*, and

advanced OSD controls.

Product Features

• 16.7 million color TFT LCD display Support resolutions up to SXGA 1280x1024

• Compatible with IBM VGA & VESA, Apple Macintosh and Clones*

• Universal power adapter

• Supports DDC1/2B compatibility

• Advanced OSD controls for picture perfect adjustments

• Detachable stand for VESA wall-mounting application

Cleaning your LCD17M

• Gently wipe the screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth.

This removes dust and other particles that can scratch the screen.

• Do not apply pressure to the screen surface when cleaning.

• Do not pour or spray any liquid directly onto the screen or housing of the LCD Display.

Chemical cleaners have been reported to damage the screen or housing of the LCD Display.

Commercial glass cleaner or 50/50 alcohol and water may be used.

* An additional adapter may be required.

(1) Increase [ - ]

This button is used to decrease the value

of the selected OSD function.

(2) Decrease [ + ]

This button is used to increase the value

of the selected OSD function.

(3) Select

This button is used to select (“UP” direc-

tion) the OSD function on the screen.

This button also activates the On-Screen

Display. (OSD)

(4) Select

This button is used to select (“Down”

direction) the OSD function on the screen.

This button also activates the On-Screen

DIsplay. (OSD)

Installation

Taking a closer look

Power Button

Pressing this button switches the

display system power ON or OFF.

There is a few second delay from

the time power is switched on until

the display appears.

2. 3.

POWER BUTTON

Installation

Display Angle

For viewing clarity, you can tilt the

LCD forward (up to -4 degrees) or

backward (up to 19 degrees)

CAUTION: In order to protect the LCD, be sure to hold the

base when you adjust the LCD. Do not touch the screen.

19°

Installation

Connecting the LCD17M to your computer

1. Connect the Power cord with

the power supply as shown.

(see diagram 1)

2. Connect the appropriate cables

to the designated connector shown.

(see diagram 2)

3. Connect the Power cord to your

power outlet. Turn the both the moni-

tor and your computer on.

Installation

Removing the Base for VESA wall/arm mounting.

31. Tilt monitor down on its front face.

Using a screw driver, unscrew one

screwhead. (see diagram 1)

2. Pull the plastic piece off as shown.

(see diagram 2)

3. Remove the 4 screws on as

shown. (see diagram 3)

Please note: this setup is for people who requires wall or arm mounting. Such application requires additional

hardware which may not be included. Please contact your wall/arm mounting vendor for details.

Inhaltsverzeichnis

Andere Princeton Monitor Handbücher

Princeton

Princeton SENERGY2383 Bedienungsanleitung

Princeton

Princeton SENergy 714 Bedienungsanleitung

Princeton

Princeton VL2018W Montageanleitung

Princeton

Princeton LCD1700 Bedienungsanleitung

Princeton

Princeton LCD Flat Panel TV LCD 1708 Montageanleitung

Princeton

Princeton LCD 1912 Montageanleitung

Princeton

Princeton EO710F Bedienungsanleitung

Princeton

Princeton LCD1711 Bedienungsanleitung

Princeton

Princeton VL1514 Bedienungsanleitung

Princeton

Princeton VL154 Bedienungsanleitung

Princeton

Princeton LCD15 Bedienungsanleitung

Princeton

Princeton VL1919 Bedienungsanleitung

Princeton

Princeton LCD1516 Montageanleitung

Princeton

Princeton LCD2000 Bedienungsanleitung

Princeton

Princeton LCD Flat Panel TV PD Montageanleitung

Princeton

Princeton SENergy 914 Bedienungsanleitung

Princeton

Princeton AGX700 Bedienungsanleitung

Princeton

Princeton LCD Flat Panel TV LCD 1911 Montageanleitung

Princeton

Princeton VL1918 Montageanleitung

Princeton

Princeton ULTRA97 Bedienungsanleitung

Princeton

Princeton LCD1711 Montageanleitung

Princeton

Princeton W2200PD Montageanleitung

Princeton

Princeton LCD1950 Bedienungsanleitung

Princeton

Princeton VL2418W Montageanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung