Pro-Team ProGuard 16 MD Bedienungsanleitung

OWNER’S MANUAL

Large Capacity 2-stage

Commercial Wet/Dry Vacuum

ProGuard®16 MD

1073860

WARNING Read Owner's Manual before using this product.

Failure to do so can result in injury or property damage.

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

ii ProTeam

TABLE OF CONTENTS

ProGuard®16 MD,

16 Gallon Wet/Dry Vacuum

Important Safety Instructions 1-2

Introduction 3

Grounding Instructions 4

Assembly 5-7

Filters 8

Operation 9-10

Accessories 11

Preventive Maintenance 11-13

Parts List 14-17

Limited Warranty 18-20

Spanish 21-42

French 43-65

Go to www.pro-team.com to register your new Vacuum.

INSPECTION

Carefully unpack and inspect your new ProTeam Vacuum for shipping

damage. Each unit is tested and thoroughly inspected before shipping.

All returns must have a Return Authorization Number (RAN). To request

an RAN or to ask questions regarding any shipping damage, contact

ProTeam at 866.888.2168 or [email protected]

This Owner’s Manual has important information for the use and safe

operation of this machine. Read this manual carefully before starting the

machine. Keep this manual available at all times and instruct all owners to

read this manual. If instructions are not followed, an injury may occur or

equipment, furniture or buildings may become damaged.

For new manuals please contact

ProTeam, Inc. at: [email protected]

P.O. Box 7385, Boise, ID 83707

866.888.2168 or visit www.pro-team.com for a downloadable version.

The contents of this manual are based on the latest product information

available at the time of publication. ProTeam reserves the right to make

changes or improvements to its machines without notice.

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

ProTeam 1

Safety is a combination of common sense, staying alert, and knowing how your

Wet/Dry Vacuum cleaner (“Vacuum”) works.

Safety Signal Words

DANGER: Indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

WARNING: Indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

CAUTION: Indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

When using your Vacuum, always follow basic safety precautions including the

following:

WARNING: Read Owner’s Manual before using this product. To

reduce the risk of fire, electric shock, or injury:

IMPORTANT SAFETY INSTRUCTIONS

1. Read and understand this manual and all labels on the Wet/Dry Vacuum before

operating.

2. Use only as described in this manual.

3. DO NOT leave Vacuum running while unattended - you may fail to notice

important signs indicating abnormal operation such as loss of suction, debris/liquid

exiting the exhaust, or abnormal motor noises. Immediately stop using Vacuum if

you notice these signs.

4. DO NOT leave Vacuum when plugged in. Unplug from outlet when not in use and

before servicing.

5. Sparks inside the motor can ignite flammable vapors or dust. To reduce the risk

of fire or explosion, DO NOT use near combustible liquids, gases, or dusts, such

as gasoline or other fuels, lighter fluid, cleaners, oil-based paints, natural gas, coal

dust, magnesium dust, grain dust, aluminum dust, or gun powder.

6. DO NOT vacuum anything that is burning or smoking, such as cigarettes, matches,

or hot ashes.

7. DO NOT vacuum drywall dust, cold fireplace ash, or other fine dusts with standard

filter. These may pass through the filter and be exhausted back into the air. Use a

fine dust filter instead.

8. To reduce the risk of inhaling toxic vapors, DO NOT vacuum or use near toxic or

hazardous materials.

9. To reduce the risk of electric shock, DO NOT expose to rain or allow liquid to enter

motor compartment. Store indoors.

10. DO NOT allow to be used as a toy. Close attention is necessary when used by or

near children.

11. DO NOT use with a torn filter or without the filter installed except when

vacuuming liquids as described in this manual. Dry debris ingested by the impeller

may damage the motor or be exhausted back into the air.

12. Turn off Vacuum before unplugging.

13. To reduce the risk of injury from accidental starting, unplug power cord before

changing or cleaning filter.

14. DO NOT unplug by pulling on cord. To unplug, grasp the plug, not the cord.

15. DO NOT use with damaged cord, plug, or other parts. If your Vacuum is not

working as it should, has missing parts, has been dropped, damaged, left outdoors,

or dropped into water, call ProTeam Customer Service.

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

2 ProTeam

CAUTION:

- To reduce the risk of hearing damage, wear ear protectors when using for extended

time or in a noisy area.

- For dusty operations, wear dust mask, such as an N95 or P100 mask.

- Static shocks are common when the relative humidity of the air is low. vacuuming

fine debris with your Vacuum can deposit static charge on the hose or Vacuum.

To reduce the frequency of static shocks when using this Vacuum, add moisture to

the air with a humidifier.

Observe the following warnings that appear on the motor housing of your Vacuum:

WARNING - For your own safety, read and understand Owner’s Manual.

Do not run unattended. Do not pick up hot ashes, coals, toxic, flammable or other

hazardous materials. Don not use around explosive liquids or vapors.

WARNING - To reduce the risk of electric shock - Do not expose to rain - store

indoors.

IMPORTANT SAFETY INSTRUCTIONS

(Continued)

SAVE THESE INSTRUCTIONS

Violation of any of these instructions may void warranty

16. DO NOT pull or carry by cord, use cord as handle, close a door on cord, or pull

cord around sharp edges or corners. Keep cord away from heated surfaces.

17. DO NOT handle plug, switch, or the Vacuum with wet hands.

18. Use only extension cords that are rated for outdoor use. Extension cords in poor

condition or too small in wire size can pose fire and shock hazards. To reduce the

risk of these hazards, be sure the cord is in good condition and that liquid does not

contact the connection. DO NOT use an extension cord with conductors smaller

than 16 gauge (AWG) in size. To reduce power loss, use a 14 gauge extension

cord if 25 to 50 ft long and 12 gauge for 50 ft or longer.

19. DO NOT put any object into ventilation openings. DO NOT vacuum with any

ventilation openings blocked; keep free of dust, lint, hair, or anything that may

reduce air flow.

20 Keep hair, loose clothing, fingers, and all parts of body away from openings and

moving parts.

21. To reduce the risk of falls, use extra care when cleaning on stairs.

22 To reduce the risk of back injury or falls, do not lift a Vacuum that is heavy with

liquid or debris. Partially empty the Vacuum by scooping debris or draining liquid

to make it comfortable to lift.

23 To reduce the risk of personal injury or damage to Vacuum, use only ProTeam

recommended accessories.

24 To reduce the risk of eye injury, wear safety eyewear. The operation of any utility

Vacuum or blower can result in foreign objects being blown into the eyes, which

can result in severe eye damage.

25. To reduce the risk of being struck by, or pulled down by, a rolling Vac, block the

wheels when using on any uneven or sloped surface.

26. Connect to a properly grounded outlet only. See Grounding Instructions.

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

ProTeam 3

TOOLS REQUIRED

Phillips Screwdriver Mallet

Hammer

INTRODUCTION

10 12

11 13 20

1. 16 Gallon Wet/Dry Vacuum (1)

2. Hose (1)

3. Owner’s Manual (1)

4. Storage Bag (1)

5. 8" Wheel (2)

6. Metal Handle (1)

7. Axle (1)

8. Caddy, Right (1)

9. Caddy, Left (1)

10. Screw, Type AB #10 x 1-3/4 (4)

11. 2" Caster (2)

12. 1/2" Cap Nut (2)

13. Wheel Caps (2)

14. Dry Filter (1)

15. Wet Filter (1)

16. Dust Brush 100110 (1)

17. Crevice Tool 100107PT (1)

18. Nylon Brush Floor Tool 100623 (1)

19. Squeegee Tool 107199 (1)

20. Two-Piece Wand 1 1/2" 101338 (1)

OVERVIEW

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

4 ProTeam

GROUNDING INSTRUCTIONS

THIS VACUUM MUST BE GROUNDED.

If a Vacuum should malfunction or stop

working, grounding provides a path of

least resistance for electrical current,

thereby reducing the risk of electrical

shock. This unit is equipped with a

cord that has an equipment-grounding

conductor and grounding plug. The plug

must be inserted in an appropriate outlet

that is properly installed and grounded

in accordance with all local codes and

ordinances. Cutting off the ground wire

or using a cord that is not equipped with

a ground plug will void the warranty on

the unit, and ProTeam will accept NO

liability associated with the unit.

Improper connection of the equipment

grounding conductor can result in a risk

of electric shock. Check with a qualified

electrician or service person if you are

in doubt as to whether the outlet is

properly grounded. DO NOT modify

the plug provided with the appliance - if

it will not fit the outlet, have a proper

outlet installed by a qualified electrician.

The Vacuum cleaners in this manual are

for use on a nominal 120-volt circuit,

and have a grounded plug that looks

like the plug illustrated in Figure A. A

temporary adaptor that looks like the

adaptor illustrated in Figure C may be

used to connect this plug to a 2-pole

receptacle as shown in Figure B if a

properly grounded outlet is not available.

The temporary adaptor should be

used only until a properly grounded

outlet in Figure A can be installed by a

qualified electrician. The green colored

rigid ear,lug, or the like extending from

the adaptor must be connected to a

permanent ground such as a properly

WARNING

grounded outlet box cover. Whenever

the adaptor is used, it must be held in

place by a metal screw. Note: In Canada,

the use of a temporary adaptor is not

permitted by the Canadian Electrical

Code. For Canada – This appliance is for

use on a nominal 120 - volt circuit and

has a grounded attachment plug that

looks like the plug illustrated in Figure

A. Make sure that the Vacuums are

connected to an outlet having the same

configuration as the plug. No adaptor

should be used with the Vacuums

detailed in this manual.

GROUNDING

TAB FOR

GROUNDING SCREW

(C)

GROUNDED

OUTLET

GROUNDED

OUTLET BOX

(A)

ADAPTER

METAL

SCREW

(B)

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

ProTeam 5

ASSEMBLY

DRUM/CADDY

If any parts are missing or damaged

contact ProTeam Customer Service.

DO NOT assemble until you have all the

parts.

1.Remove left and right caddies from

drum.

2.Install cap nut on one side of shaft

rod. Tap gently with rubber mallet

or hammer until fully seated. Slide

open end of shaft through the wheel

(smooth side of wheel facing outward).

3.Place wheel/shaft assembly through

caddy left and on through the caddy

right, as shown.

4.Then place the remaining wheel onto

the caddy assembly (smooth side of

wheel facing outward), and install

second cap nut.

5.Invert drum to install caddy. Place the

caddy assembly onto the drum, as

shown. Be sure that wheels spin freely,

and DO NOT contact the caddies.

6.Once the caddies are aligned on

the drum, gently tap each end of

each caddy until firmly seated. It

is recommended to tap the center

portion of the front caddies, as shown.

7.Using a rubber mallet or hammer,

gently tap the wheel caps onto each

wheel until the wheel caps are firmly

seated onto each wheel. This is

required on both sides.

NOTE: Smooth side of

the wheel to the outside.

CADDY

ASSEMBLY

Cap

Nut

Shaft

Rod

Caddy Left

Wheel

Cap

Nut

Caddy

Right

Wheel Cap

Mallet

Caddy

Wheel

1/16" Clearance

TAP

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

6 ProTeam

ASSEMBLY (Continued)

DRUM/CADDY (Continued)

8. Insert the caster stem into the socket

of the caster foot as shown. (Front

casters only).

9. Push on the caster until the ball on

the caster stem is inserted all the way

into the socket. You will be able to

hear the ball snap into the socket

and the caster will swivel easily when

positioning is correct.

10. Install (4) #10 x 1-3/4" screws into

matching holes on both right and left

side of caddy, securing the caddies

to the bottom of the drum. Tighten

screws until just snug. DO NOT

over tighten the screws, as this may

deform the caddies.

Press and hold release buttons while

installing handle into handle receptacles

in drum (See illustration).

NOTE: An audible snap of release buttons

indicates successful engagement of

handle.

INSTALLING HANDLE

Press and hold release buttons as shown.

While firmly pushing in release buttons,

pull handle upwards to remove (see

illustration).

REMOVING HANDLE

Socket

Caster Stem

Caster Ball

Caster (2)

#10 x 1-3/4"

Screw (4)

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

ProTeam 7

ASSEMBLY (Continued)

Tote Snaps Tote

Straps (4)

Handle

Extension

Wand

Storage

Locations

Wall

Grommet

Wall Mount

Hook

(Not Included)

1.Install tool holder as shown with exten-

sion wand holders (not included on all

models) facing unit.

2.As an alternative storage solution, the

tool holder may hang on a wall. Two

wall mounting hooks (not included)

must be secured to the wall as shown

(sold separately).

INSTALLING TOOL HOLDER

WET/DRY VACUUM ASSEMBLY

1.Position the powerhead assembly on

the drum/caddy assembly as shown

(assembled earlier).

2.Rotate both latches down and press

until you hear them snap over the

flanges on the drum.

Drum

Latch

Drum

Latch

Drum

Flange

Latch

Drum

Powerhead

Assembly

Insert Hose

Insert the push button end of the hose

into the inlet of the Vacuum. The hose

should snap into place.

To remove the hose from the Vacuum,

press the release button in the hose

assembly and pull the hose out of the

Vacuum inlet, as shown.

Press the curved metal extension wand

into the coupling ring of the hose end.

Join the two metal extension wands,

aligning the button and hole so they snap

together.

Attach the accessories, aligning the

button and hole so they snap together.

Release

Button

Press

and

Pull

Coupling

Ring

Accessory

Metal

Extension

Wand

(Curved)

Metal

Extension

Wand

(Straight)

Wet/Dry Vac &

Hose Assembly

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

8 ProTeam

FILTERS

FILTER REMOVAL AND

INSTALLATION

WARNING: DO NOT operate

without filter cage and float, as they

prevent liquid from entering the

impeller and damaging the motor.

Removal and Installation

of the Qwik Lock™ Filter

Filter Removal:

1.Hold the filter tabs of the Qwik Lock

Wet Filter, or fine Dust Filter in each

hand.

2.With one thumb on the Qwik Lock

stud, which protrudes through the

integrated filter plate, lift up on the

filter tabs while pushing down on the

stud.

3.This action will cause the filter to

release from the filter cage. Slide filter

off cage.

Filter Installation:

1.Carefully slide the Qwik Lock filter

over the filter cage and press down on

the outside edge of the filter until the

rubber gasket on the bottom of the

filter seats securely around the base of

the filter cage and against the lid.

2.Align the small center hole in the top

of the filter over the Qwik Lock stud on

the filter cage. Press firmly on top of

the filter near the stud to allow the filter

to snap over the ball on the end of the

stud. The filter is now attached.

NOTE: Failure to properly seat the

bottom gasket could result in debris

bypassing the filter.

To Reorder Filters: Go to

www.pro-team.com or contact

ProTeam’s Customer Service Department

at 866.888.2168

Quick Lock Wet Fine Dust Cartridge Filter - 107175

Quick Lock HEPA Media Filter - 107176

Quick Lock Wet Filter - 107177

ToOrderPartsCall1-888-702-5326-https://monsterfloorequipmentparts.com

Inhaltsverzeichnis

Sprachen:

Andere Pro-Team Staubsauger Handbücher

Pro-Team

Pro-Team Super CoachVac Bedienungsanleitung

Pro-Team

Pro-Team ProGuard Series Bedienungsanleitung

Pro-Team

Pro-Team QuarterVac Bedienungsanleitung

Pro-Team

Pro-Team ProForce 1500 Bedienungsanleitung

Pro-Team

Pro-Team PROCARE 15 Bedienungsanleitung

Pro-Team

Pro-Team ProForce 1500XP Bedienungsanleitung

Pro-Team

Pro-Team Super CoachVac Bedienungsanleitung

Pro-Team

Pro-Team ProCare15XP Bedienungsanleitung

Pro-Team

Pro-Team Super CoachVac Handbuch

Pro-Team

Pro-Team ProCare 15XP HEPA Bedienungsanleitung

Pro-Team

Pro-Team LineVacer Handbuch

Pro-Team

Pro-Team MegaVac Bedienungsanleitung

Pro-Team

Pro-Team Super CoachVac Bedienungsanleitung

Pro-Team

Pro-Team Super HalfVac Pro Bedienungsanleitung

Pro-Team

Pro-Team Super CoachVac Bedienungsanleitung

Pro-Team

Pro-Team GoFree Flex Pro II Bedienungsanleitung

Pro-Team

Pro-Team MegaVac Handbuch

Pro-Team

Pro-Team GoVac BP Bedienungsanleitung

Pro-Team

Pro-Team LineVacer HEPA Bedienungsanleitung

Pro-Team

Pro-Team Super Coach Pro 10 Bedienungsanleitung

Pro-Team

Pro-Team Super CoachVac HEPA Bedienungsanleitung

Pro-Team

Pro-Team PROCARE 15 Bedienungsanleitung

Pro-Team

Pro-Team FreeFlex Bedienungsanleitung

Pro-Team

Pro-Team AviationVac Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung