Pro-Team Vac Station Bedienungsanleitung

Items Included for Installation:

a. ProTeam Vac Station

b. Mounting Bracket (Factory Installed)

c. Tool storage for cover plate

d. Wall Bracket

e. 2 in. wall bracket screws (3)

Tools Needed for Installation:

Stud Finder

Pen or Pencil

Measuring Tape or Yard Stick

Level

Phillips Head Screwdriver

Drill with 1/8 in. bit

Using a stud finder in the area you wish

to mount the ProTeam Vac Station,

locate and mark a wall stud. Be sure to

mount the Vac Station into a stud, not

just the wall board or sheet rock.

Step 1

Using a tape measure, mark a spot

on the wall 36 in. from the floor.

This will be the location of the

middle mounting hole and screw

for the wall bracket.

Step 3

First Inspect your ProTeam

Vac Station and make sure

that the following items

have been included:

Using a drill with a 1/8 in. bit, drill a

hole 2 in. deep on the mark you made

in step 2. Line the middle hole of the

wall bracket up with the hole and

insert a wall bracket screw. Leave the

screw loose for now.

Step 2

Warning!

DO NOT treat the Vac Station as a toy or seat.

DO NOT take any short cuts or skip steps in the installation of the Vac Station.

Failing to follow instructions, can lead to failure of the Vac Station, damage to the

mounting surface, injury from falling equipment, or any combination thereof.

TURN OFF any ProTeam vacuum before storing it on the Vac Station.

DO NOT LEAVE any ProTeam vacuum plugged in while being stored on the Vac

Station.

USE AND INSTALL ONLY according to the instructions contained in this instruction

sheet. Use only the manufacturer-supplied parts or recommended parts.

DO NOT STORE anything other than your ProTeam vacuum, attachments and

filters on the Vac Station.

DO NOT store any chemicals or materials near the Vac Station that may be

flammable or combustible.

SECURE ONLY to a wall stud. If you are not sure how to find a wall stud, consult

with qualified personnel.

BEFORE DRILLING make sure there are no electrical or pluming lines running

through the wall were you plan to mount the ProTeam Vac Station.

Vac Station Installation

[email protected]

866.888.2168 106848 4/11

Step 4

Vac Station Installation

[email protected]

866.888.2168 106848 4/11

Using a level, align the wall bracket into

the vertical position. Mark the location

of the other two mounting screw points

at both ends of the wall bracket.

Step 5

Rotate the wall bracket back into the

vertical position and place screws in

the last two holes and tighten. Don’t

forget to tighten the center screw

that was left loose in Step 3.

Step 7

Line up the standard guide and mounting

bracket on the Vac Station. Mount the

vac station at the proper height.

You may need to loosen the three mount-

ing screws a little if the bracket doesn’t

slide into a secure fit.

Step 6

Rotate the wall bracket to the side and

with the same 1/8 in. bit, drill two

more holes 2 in. deep, one on each

of the marks you made in Step 4.

Step 8

The proper height of the ProTeam Vac

Station is determined by the user of

the vacuum. The vacuum user should

be able to back up to the Vac Station

and without bending his or her knees

or rising on the balls of his or her feet,

slip the vacuum on or off of the Vac

Station easily.

Step 9

The ProTeam Vac Station has space

to hold all of your ProTeam vacuum

tools, power cord and filters.

Andere Pro-Team Staubsauger Handbücher

Pro-Team

Pro-Team GoCartVac Bedienungsanleitung

Pro-Team

Pro-Team Super CoachVac Bedienungsanleitung

Pro-Team

Pro-Team ProClean Bedienungsanleitung

Pro-Team

Pro-Team AviationVac Bedienungsanleitung

Pro-Team

Pro-Team QuarterVac Bedienungsanleitung

Pro-Team

Pro-Team ProGen 12 Bedienungsanleitung

Pro-Team

Pro-Team ProForce 1200XP Bedienungsanleitung

Pro-Team

Pro-Team Super HalfVac Pro Bedienungsanleitung

Pro-Team

Pro-Team PROGUARD LI 3 CORDLESS Bedienungsanleitung

Pro-Team

Pro-Team RUNNINGVAC Bedienungsanleitung

Pro-Team

Pro-Team GoCartVac Bedienungsanleitung

Pro-Team

Pro-Team Super CoachVac Bedienungsanleitung

Pro-Team

Pro-Team Upright Vacuum Bedienungsanleitung

Pro-Team

Pro-Team ProForce 1200XP HEPA Bedienungsanleitung

Pro-Team

Pro-Team GoCartVac Bedienungsanleitung

Pro-Team

Pro-Team MegaVac Bedienungsanleitung

Pro-Team

Pro-Team MegaVac Bedienungsanleitung

Pro-Team

Pro-Team ProGuard 15 Bedienungsanleitung

Pro-Team

Pro-Team ProGuard 4 Portable 1071280 Bedienungsanleitung

Pro-Team

Pro-Team 1075060 Bedienungsanleitung

Pro-Team

Pro-Team SIERRA Bedienungsanleitung

Pro-Team

Pro-Team Super Coach Pro 6 Bedienungsanleitung

Pro-Team

Pro-Team TailVac Bedienungsanleitung

Pro-Team

Pro-Team Alpine Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung