PROAIM CINEMA Series Bedienungsanleitung
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything
that is listed below.
Polaris Portable Dolly with Universal Track Ends (DL-PLRS-01)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manual
Polaris Dolly with 16 wheels (Part-1)
Conversion Ring
(Part-7)
75mm Bowl Adapter
(Part-5)
100mm Bowl Adapter
(Part-6)
Break System
(Part-4)
2 x Universal Track Ends (Part-2) Center Support (Part-3)
Wheel color may be vary according to availability
2
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE GEAR!
BE HIGHLY VIGILANT OF SURROUNDINGS
Check the area you will be shooting in, before shooting. Make sure your path is clear. Look for
obstacles and note anything you might run into or trip over. Extra care is also necessary when
tackling stairs and other kinds of uneven ground.
ALWAYS WEAR PROTECTIVE GEAR
If you intend to shoot while moving fast or while traversing uneven terrain, do not hesitate to
wear protective gear as knee or elbow pads, or a helmet.
DO NOT SHOOT IN UNSAFE CONDITIONS
Avoid situations where one commonly falls like skis, skates or running in muddy fields.
ADULT SUPERVISION IS RECOMMENDED
Minors using this product should have adult supervision.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE-FREE OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE
‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE
SpecificaƟons
Polaris Dolly
‐Construcon: Dolly Platform: High-grade CNC Aluminum
Track Wheels: High-density Polyurethane
Bearings: High-Speed Stainless Steel
‐Load Capacity: up to 200kg/440lb, Rest depends on track capacity
‐Camera Mount: Incorporated Mitchell Mount
75mm & 100mm Bowl Adapters
Optional Mitchell to 150mm adapter is available for purchase.
‐Compatible Track: 1.5'' to 2'' (38 – 50.8mm)
‐Track Distance: 12'' Center distance
‐Accessory Mounting: 2 x 3/8" Through Holes
2 x 1/4"-20 Threaded
2 x 3/8"-16 Threaded
‐Temperature Maximum: 100°F (37.8°C)
‐Dimensions (L X W) Dolly: 10" x 14" / 25.4 x 35.5 cm
‐Package Weight: 28.4 kg / 62.6 lb
‐Box Dimensions (L X W X H): 86 x 60 x 35 cm
2
Here we have used 8ft track (not included) for
assembling purpose. So, for longer track, you
need to place the central support (Part-3) in
the middle of the track, as shown in photo.
Polaris Dolly Setup
1Now place the dolly (Part-1) onto the track.
The handles part of the dolly platform
(Part-1) should be inside of the track
(not included) as shown. Make sure all wheels
are aligned correctly on the track (not
included) and dolly runs smoothly.
5Mount the break bracket (Part-4) on side of the
dolly platform (Part-1) & tighten the knob.
Adjust the position of the bracket (Part-4) so it
goes under the track to prevent the platform
(Part-1) from tilting out.
2Insert the universal track ends (Part-2) on the
track (not included).
Use the supplied long thumb screws to lock
the track into position.
7.Now, mount the 75mm bowl adapter (Part-5)
onto the dolly platform (Part-1)
Note: Assembly steps for 75mm
(Part-5) and 100mm (Part-6) Bowl are same.
2. 3.
4.
1.
5. 6.
7.
Now, mount the fluid head (Not Included) onto
the portable dolly (Part-1)
Insert the conversion ring (Part-7) from the
bottom side of dolly through the fluid head
screw.
8.
8.
Note: To prevent the 75mm/100mm or any other fluid head from slipping through the dolly platform's
centre hole, we use a conversion ring, Conversion Ring reduces the gaping of the hole size of the dolly
platform. If the size of fluid head locking base is smaller than the center hole of the dolly platform, then we
have to remove the bolts and use the conversion ring to lock the fluid head in place. But if the size of fluid
head locking base matches the center hole of the dolly platform, then we do not need a conversion ring.
We can directly lock the fluid head with the locking lever.
3
4
6
9.
9.
3
13 Attach the Centre Support Bar (Part-3) under
the centre of the track (Part-1) system.
Help of a Support stand (not included).
15 Now mount your Fluid Head (not included)
onto the Platform (Part-1).
Tighten the knob Properly.
17 Then mount your camera setup.
Note: If you need higher level shots, then you
can put universal track end (Part-2) on C-Stands
(not included).
11. Mount the Universal track ends (Part-2) onto
C-stand (not included)
Tighten the provided knob to secure it
properly.
11. 12.
10.
15.
14.
13.
17.
16.
10. Then tighten properly to secure with it.
12
14
16
YOUR PROAIM POLARIS PORTABLE CAMERA DOLLY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our
utmost support and care unl you use our product.
Andere Handbücher für CINEMA Series
70
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere PROAIM Kamerazubehör Handbücher
PROAIM
PROAIM QR-ELMG-01 Bedienungsanleitung
PROAIM
PROAIM Bazooka BZ-FLXN-01 Bedienungsanleitung
PROAIM
PROAIM P-TP300 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM SnapRig Universal Bedienungsanleitung
PROAIM
PROAIM SnapRig NATO Bedienungsanleitung
PROAIM
PROAIM SnapRig CA202 Bedienungsanleitung
PROAIM
PROAIM Jazz Autopan Camera Slider Bedienungsanleitung
PROAIM
PROAIM CG-014-00 Bedienungsanleitung
PROAIM
PROAIM FF-WRLS-DR-ONE Bedienungsanleitung
PROAIM
PROAIM CINEMA TP-BIPT-01 Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM P-GHF-01 Bedienungsanleitung
PROAIM
PROAIM Fusion Bedienungsanleitung
PROAIM
PROAIM FF-WRLS-DR Bedienungsanleitung
PROAIM
PROAIM CINEMA Series Bedienungsanleitung
PROAIM
PROAIM P-HLR Bedienungsanleitung
PROAIM
PROAIM Power Pack Bedienungsanleitung
PROAIM
PROAIM P-LTCP-01 Bedienungsanleitung
PROAIM
PROAIM SR-016-00 Bedienungsanleitung
