The first thing to do is decide
where to mount your new ProCooL
AV Cooling System.
The fan location(s) depend on the
number of fans you have with your
system. Example “a” to the right
shows a 2 fan system
configuration. If your cabinet is
fully enclosed typically you would
want one fan blowing into the
cabinet and the other blowing out
to achieve good air circulation.
If the front of your cabinet is open
you might consider mounting both
fans to blow into the cabinet and
onto your hotter components.
You can also directly cool your
components as shown in figure 4
on page 5.
Examples “b” and “c” show more
configurations for cabinets with
multiple compartments and for
multiple fan systems.
Essentially the fan positions are
your choice. Most important is to
create air circulation, cool your
components and to remove the
hot air.
Example “d” shows a typical layout
for a cabinet with doors enclosing
the front. Typically there is a space
between the front of the shelf and
the inside of the cabinet door. This
air space will allow unobstructed
airflow from bottom to top. This is
the recommended set up for this
type of cabinet.
