ProLights AIR5FAN Bedienungsanleitung

MANUALE UTENTE

USER MANUAL

AIR5FAN

MOVING HEAD

IT - EN

AIR5FAN

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.002-02/18

AIR5FAN

Packing content • AIR5FAN

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 Linking

3. 5 DMX mode

3. 6 DMX conguration

3. 7 DMX addressing

3. 8 Wireless control settings

3. 9 DMX control

3. 10 Display settings

3. 11 Special functions

3. 12 Fixture settings

3. 13 Lamp settings

3. 14 Fixture information

3. 15 Operation in automatic mode

3. 16 Slave Receive mode

3. 17 Scenes Record mode

3. 18 Music mode

3. 19 Sensitivity microphone

3. 20 Connection of the DMX line

3. 21 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

AIR5FAN

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope.When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

AIR5FAN

- 1 - INTRODUCTION

1.1 DESCRIPTION

AIR5FAN is a pixel-FX moving head able to control the spread of its pixels through motorized lens system,

passing from a sharp linear beam eect to a MultiRay. It empowers 5x40W RGBW/FC LED, with 2° beam

each, delivering stunning brightness for big setups and featuring innite rotation over Pan and Tilt. Last

but not least, AIR5FAN allows to mount a mirror on its housing, featuring an added eect as moving pro-

jecting surface bouncing beams of other light sources.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 5x40W RGBW Osram Ostar LED

• Lux: 27211lux @3m

• Source Life Expectancy: >50.000 h

OPTICS

• Beam Angle: 2°

• Lens Diameter: 68mm

• Lens Type: HQ glass lens optics

COLOR SYSTEM

• Color Mixing: RGBW/FC

• CTC: CTC control through independent DMX channel

• White Presets: 2700-10000K

• Color Wheel: Virtual color wheel with presets

DYNAMIC EFFECTS

• Pixel Patterns: Preprogrammed dynamic and static patterns

• FX Generator: Adjustable foreground/background color, index, speed, direction

• Special Features: Head pivot control, mirror reecting beams

BODY

• Hardware On-board: Mountable mirror through quick-lock screws

• Pan Angle: 540/630° with 360° continuous rotation

• Tilt Angle: 360° with 360° continuous rotation

• Pan/Tilt Resolution: 16bit

• Feedback: Automatic repositioning after accidental movement

• Body: Aluminium structure with hi-resistance polycarbonate cover

• Body Color: Black

• Other: Pivot angle: 0-28°

CONTROL

• Protocols: DMX512, RDM, Art-Net

• DMX Channels: 17/27/43ch

• Pixel Control: Pixel2Pixel control

• W-DMX: Optional, Wireless Solution receiver

• RDM: RDM ready for xture remote monitor and settings

• Display: LCD high resolution color display with autoip

• Firmware Upgrade: Yes, via USB-DMX interface (UPBOX2) not included

AIR5FAN

• Hibernation: Power Safe Mode when lost DMX

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: Linear 0~100% electronic dimmer

• Strobe/Shutter: 1-30 Hz, electronic

• Battery Backup: Battery backup for user operation without connecting to the main power

• Operating Temperature: -10° ~ +45°

• Flicker: Flicker free operation

ELECTRICAL

• Power Supply: 100-240V – 50/60Hz

• Power Consumption (at 230V): 208W

• Power Consumption (at 120V): 218W

PHYSICAL

• Cooling: Aluminium heat sink cooling system and low noise fan

• Suspension And Fixing: Any position with“quick-lock” omega brackets

• Pan/Tilt Lock: Pivot lock for trasportation and maintenance

• Signal Connection: DMX 5p IN/OUT Amphenol, ARTNET IN/OUT

• Power Connection: PowerCON TRUE1 in

• IP: 20

• Dimensions (WxHxD): 577.5x473.8x242 mm

• Weight: 16kg

577.5mm

227,36 in

473.8mm

186,53 in

412.7mm

162,48in

242mm

9,53 in

Technical drawing Fig.1

AIR5FAN

1.3 OPERATING ELEMENTS AND CONNECTIONS

Fig.3

1. LED BAR

2. ROTARY ARM

3. HANDLE

4. LED INDICATOR "WDMX"

5. MICROPHONE

6. CONTROL PANEL with LCD display and 5

button used to access the control panel

functions and manage them.

7. EtherCON connector Signal IN/OUT

8. EtherCON connector Signal IN/OUT

9. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3

= DMX+, 4 N/C, 5 N/C

10. DMX OUT (XLR a 5 poli): 1= massa, 2 = DMX -,

3 = DMX +, 4 N/C, 5 N/C

11. POWER IN (PowerCON IN): for connection to a

socket (100-240V~/50-60Hz) via the supplied

12. MAIN FUSE HOLDER: replace a burnt-out fuse

by one of the same type onlymains cable.

564

10 117 8

View B

View A

AIR5FAN

2.1 MOUNTING

The may be set up on a solid and even surface. By means of the xing facilities of the baseplate, the

unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For xing, stable

mounting clips are required. According to the gure, the bolts of the brackets are placed into the openings

provided in the base plate and turned clockwise until they lock (to the stop). Always ensure that the unit

is rmly xed to avoid vibration and slipping while operating. The mounting place must be of sucient

stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any installa-

tion, always comply scrupulously with all the regulations (particularly regarding safety) currently in force

in the country in which the xture’s being used. Always additionally secure the projector with the safety

rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the maximum

fall of the projector will be 20 cm.

Fig.3

ALISCAFF

CLAMP

SAFETY

CABLE

OMEGA

BRACKETS

- 2 - INSTALLATION

AIR5FAN

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the AIR5FAN is ready for operation. To switch o,

disconnect the mains plug from the socket. For a more convenient operation it is recommended to con-

nect the unit to a socket which can be switched on and o via light switch.

3.2 BASIC

The AIR5FAN has a LCD display and 5 button used to access the control panel functions and manage them

(g.4).

Fig.4 - Functions of the buttons and display icons

LEFT RIGHT UP DOWN ENTER BATTERY

Return to the top

level

Commute from

units, tens, hundred

in the menu

Increases the value

displayed or passes

to the previous item

in a menu

Decreases the value

displayed or passes

to the next item in

the menu

Conrms the

displayed value,

or activates the

displayed function,

or enters the

successive menu

Used to activate the

backup battery. It

allows to switching

display interface

without main power

CONNECT LIGHT INFORMATION SET PROGRAM

AIR5FAN

3.3 MENU STRUCTURE

1CONNECT ðAddress ðDMX ðValue (1-512)

W-DMX ðValue (1-512)

Artnet ðValue (1-512)

DMX Mode ðMode ðWASH / FX / PIXFX/User

Edit User ðMax Channel/Control// Fine/Tilt/...

Wireless ðDMX Out ðON/OFF

Reset Connect ðYES/NO

Ethernet ðDMX Out ðON/OFF

IP Address

IP Mask

Universe

RDM ID ðName ðFixture ID Name

Mode ðMode1/Mode2

Password

PID Code

2SET UP ðTemperature ðTemperature C/F ðCelsius/Fahrenheit

Max Temperature ðValue (80~139°/176~282° (90°))

Movement ðPan Reverse ðYES/NO

Tilt Reverse ðYES/NO

Pan degree ð630/540

Feedbacks ðYES/NO

Pan/Tilt Mode ðStandard/Smooth

Continuos

Screen ðBacklight ðAlways On/Min (01-99)

Flip Display ðYES/NO/AUTO

Display Bright ðValue (00-31)

Key Lock ðON/OFF

Language ðEN/FR/SP...

Fixture ðFans Mode ðAuto Speed/High Speed

No Signal ðClose/Hold/Auto/Music

Hibernation ðDisable/Min (01-99)

Theater Mode ðYES/NO

Frequency 600Hz…… (1200Hz)

Adjust ðPan, Tilt, [...] ðValue (000-255) for each function

3ADVANCED ðReset ðAll

Pan&Tilt

Others

Inhaltsverzeichnis

Sprachen:

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights MINIECLFRTU-DY Bedienungsanleitung

ProLights

ProLights ECLIPSETU Bedienungsanleitung

ProLights

ProLights RA2000PROFILE Bedienungsanleitung

ProLights

ProLights SUPERFLOWER DMX led Bedienungsanleitung

ProLights

ProLights LUMIPAR12UQ Bedienungsanleitung

ProLights

ProLights PHYRO1200SNOW Bedienungsanleitung

ProLights

ProLights Pendant stations Bedienungsanleitung

ProLights

ProLights DIGIDRIVER Bedienungsanleitung

ProLights

ProLights PANORAMAIPWBX Bedienungsanleitung

ProLights

ProLights LUMIPIX 12QIP Bedienungsanleitung

ProLights

ProLights CROMOSPOT500 Bedienungsanleitung

ProLights

ProLights MINIECLFRFC Bedienungsanleitung

ProLights

ProLights VORTEX VXBUBBLE Bedienungsanleitung

ProLights

ProLights Z8STRIP Bedienungsanleitung

ProLights

ProLights LUMIPAR6Q Bedienungsanleitung

ProLights

ProLights ARCLED7314HD Bedienungsanleitung

ProLights

ProLights PANORAMAIPSPOT Bedienungsanleitung

ProLights

ProLights ECLIPSEHDTWC Bedienungsanleitung

ProLights

ProLights ARENACOB4FC Bedienungsanleitung

ProLights

ProLights STARBALL Bedienungsanleitung

ProLights

ProLights SUNBLAST3000FC Bedienungsanleitung

ProLights

ProLights PIXIEWASHXB Bedienungsanleitung

ProLights

ProLights Batstrip160 Bedienungsanleitung

ProLights

ProLights TRIPLESCAN Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung