ProLights MINIECLFRTU-DY Bedienungsanleitung

EN - IT

USER MANUAL

MANUALE UTENTE

FRESNEL PROIECTOR

MINIECLFRTU-DY

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV.001-09/18

MINIECLFRTU - DY

Packing content • MINIECLFRTU-DY

• Barn doors

• Gel frame

• User manual

TABLE OF CONTENTS Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Technical specications

1. 2 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 DMX mode

3. 5 DMX conguration

3. 6 Screen

3. 7 Dimmer mode

3. 8 Led frequency

3. 9 Factory Reload

3. 10 Fixture Information

3. 11 Maste/Slave

3. 12 Eects

3. 13 Static

3. 14 Connection of the DMX line

3. 15 Construction of the DMX termination

3. 16 Channels DMX

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement

4. 3 Trouble shooting

MINIECLFRTU - DY

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 45 °C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the xture’s being used.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

MINIECLFRTU - DY

- 1 - INTRODUCTION

1.1 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source:1x38 W LEDs

• CT:(TU) 3050 K - (DY) 5000 K

• CRI:(TU) (19°) 92.2 ~ (55°) 92.1 - (DY) (19°) 82 ~ (55°) 81.9

• R9:(TU) (19°) 65.3 ~ (55°) 64.5 - (DY) (19°) 9.4 ~ (55°) 8.5

• Luminous ux:(TU) (19°) 853.77 lm (55°) 2005.9 Im - (DY) (19°) 1349.4 lm (55°) 2840.6 lm

• Lux:(TU) (19°) 744 lux - (55°) 258 lux - (DY) (19°) 978 lux - (55°) 348 lux @3m

• Lux:(TU) (19°) 267.4 lux - (55°) 92.88 lux - (DY) (19°) 352.08 lux - (55°) 125.28 lux @5m

• Source life expectancy: >50.000 h

OPTICS

• Zoom:19°~55 °

• Beam angle:19°~55 °

• Field angle:33°~78 °

• Lens diameter:3.93’’-100 mm

• Lens type: fresnel beam lens

COLOUR SYSTEM

• Colour mixing:TU or DY

DYNAMIC EFFECTS

• Static colour mode: selection of static dimmer

• Auto mode: built-in programs with execution speed adjustment

BODY

• Hardware on-board: lter frame, 4 doors barndoor, omega bracket spigot

• Body: aluminium die-casting

• Body colour: black

CONTROL

• Protocols: DMX512, RDM

• DMX channels:1 ch - 2 ch 1 - 2 ch 2 - 3 ch - 5 channel

• RDM: RDM ready for xture remote monitor and settings

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0~100%, manual knob dimmer

• Dimmer curves:4 dierent dimming curves available

• Strobe / shutter:28 Hz, electronic

• Operating temperature: -10° ~ +45°

• Flicker: icker free frequency with adjustable PWM

• Selectable PWM: 600~25K Hz

MINIECLFRTU - DY

ELECTRICAL

• Power consumption:48

• Power supply: 100-240V – 50/60Hz

• Power consumption (at 230V):33.2 W

• Power consumption (at 120V):31.8 W

PHYSICAL

• Cooling: natural cooling of the peculiar chassis and to absence of fans

• Signal connection: DMX 5p IN/OUT

• Power connection:Power cable

• IP rating:20

• Dimensions (WxHxD):203x191x279 mm

• Weight:2.38 kg

Fig.1 - Technical drawing

191 [7.51 in]

279 [10.98 in]

203 [7.99 in]

Fig.2

679

MINIECLFRTU - DY

1.2 OPERATING ELEMENTS AND CONNECTIONS

1. AIR OPENING

2. LOCKING KNOB for mounting bracket

3. MOUNTING BRACKET

4. BARNDOOR HOLDER for insertion and locking

barn door

5. Rotary knob for manual focus

6. CONTROL PANEL with display and rotary knob

used to access the control panel functions

and manage them

7. MAIN FUSE HOLDER: replace a burnt-out fuse

by one of the same type only

8. Cable exible with 16A Shuko plug for con-

nection to a socket (100-240V~/50-60Hz)

9. Cable exible composed of a DMX IN (5-pole

XLR): 1 = ground, 2 = DMX-, 3 = DMX+, 4 N/C,

5 N/C and DMX OUT (5-pole XLR): 1 = ground,

2 = DMX-, 3 = DMX+, 4 N/C, 5 N/C

Fig.3

MINIECLFRTU - DY

- 2 - INSTALLATION

2.1 MOUNTING

MINIECLFRTU-DY is designed for applications in exhibition areas, commercial spaces, museums, restau-

rant, churches, and any other installation where size is an important factor. For xing, stable mounting

clips are required. The mounting place must be of sucient stability and be able to support a weight of

10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the xture’s being used.

• Install the projector at a suitable location.

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm. The

adjust the projector and use the knobs.

NOTE - For the installation of the MINIECLFRTU-DY make sure that the ridge of the adaptor is in with the

groove of the track. Turn knobs 90° to connect the adaptor to the circuit.

MINIECLFRTU - DY

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

To turn on the MINIECLFRTU-DY connect the supplied main cable to a socket (100-240 VAC-50/60 Hz).

Then the unit is ready for operation.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via a light switch.

ATTENTION - Mains voltage must be switched o before mounting; maintenance; insert and replace

Adaptors; spots and luminaires.

3.2 BASIC

Access control panel functions using the rotary knob located directly on the left the LED Display (g.5).

Fig.4- Functions of the buttons

1CONNECT ðDMX Address ð(001-512)

DMX Mode ðEASY-1Ch

BASIC-2Ch 1

BASIC-2Ch 2

BASIC-3Ch

STANDARD–5CH

2SETUP ðScreen ðBack Light ðOn

10S

20S

30S

ðFlip Display ðNO-Yes

3ADVANCED ðDimmer Mode ðO

Dimmer 1

Dimmer 2

Dimmer 3

Led Frequency ð 600Hz

1200 Hz

2000 Hz

4000 Hz

6000Hz

25kHZ

Factory Reload ðNO-Yes

4INFORMATION ðFixture Hours ð0-9999

Version ðV1.0

Temperature ð°C

UID ð15D00223****

5STAND ALONE ðMaster/Slave ðMaster

Slave

Eect ðEect 1

Eect 2

Eect 3

Eect 4

Static ðDimmer

Strobe

MINIECLFRTU - DY

3.3 MENU STRUCTURE

Inhaltsverzeichnis

Sprachen:

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights Z7SPOT Bedienungsanleitung

ProLights

ProLights SMARTBATHEX Bedienungsanleitung

ProLights

ProLights SmartBat Wash Bedienungsanleitung

ProLights

ProLights STARK1000 Bedienungsanleitung

ProLights

ProLights SUNBLAST3000FC Bedienungsanleitung

ProLights

ProLights JETSPOT-3 Bedienungsanleitung

ProLights

ProLights DISPLAYCOBTRWDFC Bedienungsanleitung

ProLights

ProLights RUBYFCX Bedienungsanleitung

ProLights

ProLights PIXIEWASHXB Bedienungsanleitung

ProLights

ProLights SmartBat PlusG2 Bedienungsanleitung

ProLights

ProLights ARCLED7314HD Bedienungsanleitung

ProLights

ProLights TRIPLESCAN Bedienungsanleitung

ProLights

ProLights RA2000PROFILEHB Bedienungsanleitung

ProLights

ProLights PF5 Series Bedienungsanleitung

ProLights

ProLights ECLFRJPTU-DY Bedienungsanleitung

ProLights

ProLights HZ660D Bedienungsanleitung

ProLights

ProLights Mobiblast Bedienungsanleitung

ProLights

ProLights ARCLED7337VW Bedienungsanleitung

ProLights

ProLights LUMIPAR7VWPRO Bedienungsanleitung

ProLights

ProLights GALLERYCLIPSETU Bedienungsanleitung

ProLights

ProLights RA2000PROFILE Bedienungsanleitung

ProLights

ProLights LUMIPAR18TRI Bedienungsanleitung

ProLights

ProLights LEDPAR64363RGB Bedienungsanleitung

ProLights

ProLights 6 BEAM Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung