ProLights RA2000PROFILEHB Bedienungsanleitung

USER MANUAL

MANUALE UTENTE

RA2000PROFILEHB

LED MOVING PROFILE

EN - IT

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV .01-12/19

RA2000PROFILEHB

Packing content • RA2000PROFILEHB

• Power cable

• OS25 (2 pcs)

• Safety cable

• User manual

TABLE OF CONTENTS Safety

General instructionsGeneral instructions

Warnings and installation precautionsWarnings and installation precautions

1 Introduction

1. 1 Operating elements and connections1. 1 Operating elements and connections

2 Installation

2. 1 Mounting2. 1 Mounting

3 Functions and settings

3. 1 Operation3. 1 Operation

3. 2 Basic3. 2 Basic

3. 3 Menu structure3. 3 Menu structure

3. 4 Linking3. 4 Linking

3. 5 DMX addressing conguration3. 5 DMX addressing conguration

3. 6 DMX mode conguration3. 6 DMX mode conguration

3. 7 DMX addressing3. 7 DMX addressing

3. 8 Wireless settings3. 8 Wireless settings

3. 9 Ethernet3. 9 Ethernet

3. 10 Movement3. 10 Movement

3. 11 Screen3. 11 Screen

3. 12 Fixture settings3. 12 Fixture settings

3. 13 Fans mode3. 13 Fans mode

3. 14 Led red mode3. 14 Led red mode

3. 15 Auto and manual test3. 15 Auto and manual test

3. 16 Reset of the function3. 16 Reset of the function

3. 17 Adjust3. 17 Adjust

3. 18 Informaion of the device3. 18 Informaion of the device

3. 19 DMX view3. 19 DMX view

3. 20 Connection of the DMX line3. 20 Connection of the DMX line

3. 21 Construction of the DMX termination3. 21 Construction of the DMX termination

3. 22 DMX control3. 22 DMX control

3. 23 Color - Gobos wheel3. 23 Color - Gobos wheel

4 Maintenance

4. 1 Maintenance and cleaning the unit4. 1 Maintenance and cleaning the unit

4. 2 Fuse replacement4. 2 Fuse replacement

4. 3 Trouble shooting4. 3 Trouble shooting

RA2000PROFILEHB

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modications on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system tted with ecient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualied electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the xture under the following conditions:

- in places wet;

- in places subject to vibrations or bumps;

- in places with an ambient temperature of over 45°C.

• Make certain that no inammable liquids, water or metal objects enter the xture.

• Do not dismantle or modify the xture.

• All work must always be carried out by qualied technical personnel. Contact the nearest sales point

for an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation denitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way dierent to the one described in this manual, it may suer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut o power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always

comply scrupulously with all the regulations (particularly regarding safety) currently in force in the

country in which the xture’s being used.

• For inside use only. Not designed for outside use.

• The minimum distance between the xture and surrounding walls must be more than 50 cm and the

air vents at the housing must not be covered in any case.

• Install the xture in a well ventilated place.

• Keep any inammable material at a safe distance from the xture.

• The maximum temperature that can be reached on the external surface of the tting, in a thermally

steady state, is high. After power o, please cool down over 15 minutes.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

RA2000PROFILEHB

- 1 - TECHNICAL DRAWING

443

697

293

443

697

507

Technical drawing Fig.1

RA2000PROFILEHB

6 7

89 10 11 11 12 13

1.1 OPERATING ELEMENTS AND CONNECTIONS

1. MOVING HEAD

2. TILT Mechanism Lock and Release

3. ROTARY ARM

4. PAN Mechanism Lock and Release

5. BASE

6. HANDLE

7. CONTROL PANEL with TFT display

and 5 button used to access

the control panel functions and

manage them.

8. POWER IN (PowerCON TRUE

IN): for connection to a socket

(100-240V~/50-60Hz) via the

supplied mains cable.

9. POWER OUT (PowerCON

TRUE OUT): power output for

connection of multiple units in

series.

10. MAIN FUSE HOLDER: replace a

burnt-out fuse by one of the same

type only.

11. EtherCON CONNECTORS IN / OUT

signal.

12. DMX IN (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

13. DMX OUT (5-pole XLR):

1 = ground, 2 = DMX-, 3 = DMX+,

4 N/C, 5 N/C.

14. ANTENNA

15. RUBBER FEET

Fig.2

RA2000PROFILEHB

- 2 - INSTALLATION

2.1 MOUNTING

The RA2000PROFILEHB may be set up on a solid and even surface. By means of the xing facilities of the

baseplate, the unit can also be mounted upside down to a cross arm. The base plate is shown in g.3. For

xing, stable mounting clips are required. According to the gure, the bolts of the brackets are placed into

the openings provided in the base plate and turned clockwise until they lock (to the stop). Always ensure

that the unit is rmly xed to avoid vibration and slipping while operating.The mounting place must be of

sucient stability and be able to support a weight of 10 times of the unit’s weight. When carrying out any

installation, always comply scrupulously with all the regulations (particularly regarding safety) currently

in force in the country in which the xture’s being used. Always additionally secure the projector with the

safety rope from falling down. For this purpose, fasten the safety rope at a suitable position so that the

maximum fall of the projector will be 20 cm.

Fig.3

CLAMPS

OMEGA

RA2000PROFILEHB

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to

reset all motors to their home position. Shortly after that the RA2000PROFILEHB is ready for operation.

To switch o, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and o via light switch.

NOTE: remove the pan and tilt lock before connecting the RA2000PROFILEHB to the power supply.

3.2 BASIC

The control panel of RA2000PROFILEHB has a display and 5 buttons for the complete programming and

management of the projector menu (g.4).

Fig.4 - Functions of the buttons and display icons

UP DOWN LEFT RIGHT ENTER

Increases the value

displayed or passes

to the previous item

in a menu

Decreases the value

displayed or passes

to the next item in

the menu

Return to the top

level

Commute from

units, tens, hundred

in the menu

Conrms the

displayed value,

or activates the

displayed function,

or enters the

successive menu

RA2000PROFILEHB

3.3 MENU STRUCTURE

1CONNECT ðAddress ðValue (1-512)

DMX Mode ðStandard 38Ch

Standard 40Ch

Extended 39Ch

Extended 41Ch

Extended 42Ch

Standard 38Ch

Wireless ðReceive On/O ðON/OFF Default :O

Receive Reset ðNO/YES Default :No

Wireless to DMX ðNO/YES Default :No

Ethernet ðProtocol ðArt-Net/ sACN Default :Art-Net

Net ð0-127 Default: 0

Subnet ð0-15 Default: 0

Universe ð0-15 (Art-Net)/ 1-16 (sACN) Default: 0/1

Start Channel ðValue (001-512) Default: 1

IP Address ð2.133.139.215 Default: 0

Ethernet to DMX ðYES/NO Default :No

2SET UP ðMovement ðPan Reverse ðNO/YES Default: No

Tilt Reverse ðNO/YES Default: No

Pan Feedback ðNO/YES Default: Yes

Tilt Feedback ðNO/YES Default: Yes

Screen ðBacklight ðOn/10s/20s/ 30s Default: On

Flip Display ðNO/YES Default: No

Warn Cue ðON/OFF Default:On

Key Lock ðNO/YES Default: No

Fixture ðDimmer Mode ðOFF/Dimmer 1/Dimmer 2/Dimmer 3 Default: O

Fan Mode ðAuto/Silent/High/O Default: Auto

Temperature unit ð°C /°F Default: °C

Auto Test ðAutoTest …

Manual Test ðPan

Pan Fine

Tilt

Tilt Fine

P/T Speed

Dimmer

Shutter

Cyan

Magenta

Yellow

CTO

ðValue (000-255) for each function Default:

Tilt=128

Dimmer=255

Shutter = 255

RA2000PROFILEHB

Color

Gobo

RGobo

PrismRot.

Eect

REect

Focus

Zoom

Frost 1

Frost 2

Iris

Fr.shutters Rot.

Fr.shutter 1 Move.

Fr.shutter 1 Swiv.

Fr.shutter 2 Move.

Fr.shutter 2 Swiv.

Fr.shutter 3 Move.

Fr.shutter 3 Swiv.

Fr.shutter 4 Move.

Fr.shutter 4 Swiv.

ðValue (000-255) for each function

3ADVANCED ðReset ðAll

Pan

Tilt

Cyan

Magenta

Yellow

CTO

Color

Gobo

Prism

Eect

Focus

Zoom

Frost1

Frost2

Iris

Fr.shutters Rot.

Fr.shutter 1 M1

Fr.shutter 1 M2

Fr.shutter 2 M1

Fr.shutter 2 M2

Fr.shutter 3 M1

Fr.shutter 3 M2

Fr.shutter 4 M1

Fr.shutter 4 M2

ðValue (000-255) for each function

Andere Handbücher für RA2000PROFILEHB

Inhaltsverzeichnis

Sprachen:

Andere ProLights DJ-Equipment Handbücher

ProLights

ProLights MINIECLIPSE Series Bedienungsanleitung

ProLights

ProLights GALLERYCLIPSETU Bedienungsanleitung

ProLights

ProLights SmartBat PlusG2 Bedienungsanleitung

ProLights

ProLights CROMOSPOT500 Bedienungsanleitung

ProLights

ProLights CROMOSPOT400 Bedienungsanleitung

ProLights

ProLights EclFresnel JrVW Bedienungsanleitung

ProLights

ProLights PHYRO600SNOW Bedienungsanleitung

ProLights

ProLights Batstrip160 Bedienungsanleitung

ProLights

ProLights PHYRO1200SNOW Bedienungsanleitung

ProLights

ProLights ARCLED1107UV Bedienungsanleitung

ProLights

ProLights DOTQ Bedienungsanleitung

ProLights

ProLights Z7SPOT Bedienungsanleitung

ProLights

ProLights LEDPINSPOT Bedienungsanleitung

ProLights

ProLights TRIBE LUMIPIX12UT Bedienungsanleitung

ProLights

ProLights MOSAICOXL Bedienungsanleitung

ProLights

ProLights PHYROBUB Bedienungsanleitung

ProLights

ProLights CONFETTIGUNNER Bedienungsanleitung

ProLights

ProLights ARENACOB4FC Bedienungsanleitung

ProLights

ProLights ARCLED7307HD Bedienungsanleitung

ProLights

ProLights Halupix Bedienungsanleitung

ProLights

ProLights LUMIPIX 12QIP Bedienungsanleitung

ProLights

ProLights SUNBAR2500MAX Bedienungsanleitung

ProLights

ProLights SUNBLAST3000FC Bedienungsanleitung

ProLights

ProLights PF5 Series Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung