ProMinent Beta BT4a Bedienungsanleitung

Two sets of operating instructions are required for the safe and correct use of the metering pumps:

The product specific operating instructions manual

and the “General Operating Instructions ProMinent®Solenoid Metering Pumps”.

The two are valid only when read in conjunction with one another.

Please read the Operating Instructions manual through completely before commissioning this equipment.

Do not discard! The operator shall be liable for any damage caused by installation or operating errors!

Publishing details:

Operating Instructions for Solenoid Dosing Pump ProMinent®Beta®

Address:

ProMinent Dosiertechnik GmbH

Im Schuhmachergewann 5-11

69123 Heidelberg

Germany

info@prominent.com

www.prominent.com

Subject to technical modifications

ProMinent

ProMinent®

Please tear out this page!

ProMinent

Operating Instructions Manual

Solenoid Dosing Pump

Beta® BT4a and BT5a

Part No. 987871 ProMinent Dosiertechnik GmbH · 69123 Heidelberg · Germany BA BE 021 07/08 GB

Please enter identcode of the device here.

BT4A ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

BT5A ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

BA_BE_021_07_08_GB1.p65 04.08.2008, 8:03 Uhr2

Two sets of operating instructions are required for the safe and correct use of the metering pumps:

The product specific operating instructions manual

and the “General Operating Instructions ProMinent®Solenoid Metering Pumps”.

The two are valid only when read in conjunction with one another.

Please read the Operating Instructions manual through completely before commissioning this equipment.

Do not discard! The operator shall be liable for any damage caused by installation or operating errors!

Publishing details:

Operating Instructions for Solenoid Dosing Pump ProMinent®Beta®

Address:

ProMinent Dosiertechnik GmbH

Im Schuhmachergewann 5-11

69123 Heidelberg

Germany

[email protected]

www.prominent.com

Subject to technical modifications

ProMinent

ProMinent®

Please tear out this page!

ProMinent

Operating Instructions Manual

Solenoid Dosing Pump

Beta® BT4a and BT5a

Part No. 987871 ProMinent Dosiertechnik GmbH · 69123 Heidelberg · Germany BA BE 021 07/08 GB

Please enter identcode of the device here.

BT4A ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

BT5A ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___

BA_BE_021_07_08_GB1.p65 04.08.2008, 8:03 Uhr2

General User Information:

This operating instructions manual contains the product descriptions in the main text.

•main points

➤instructions

and safety information are indicated by pictograms (see chap. 2).

NOTE

Working guidelines.

Major Components

Illustrated views of Beta®

Page 2

Fig. 01

Page 1

3.1

3.2

3.3

3.4

3.5

1 2 3

ProMinent®

Major Components

1Control unit

1a Stroke length adjustment knob

1b Red LED display, fault indicator

1c Yellow LED display, warning indicator

1d Green LED display, operating status

1e Multifunction switch

1f Mains connector

1g External operating terminal

1h Float switch connector

2Power end

2a Relay insertion point

2b Optional relay

3Liquid end

3.1 Liquid end without bleed valve, with/without valve spring

3.2 Liquid end without bleed valve, with/without valve spring

3.3 Liquid end with bleed valve, with/without valve spring (PP-version)

3.4 Liquid end with bleed valve, with/without valve spring (NP-version)

3.5 Self-degassing liquid end

3a Liquid end back plate

3b Liquid end

3c Suction connection

3d Discharge connection

3e Bleed valve connection (self degassing liquid ends)

3f Bleeding/fine bleeding valve

3g Bypass tubing nozzle

BA_BE_021_07_08_GB1.p65 04.08.2008, 8:03 Uhr1

General User Information:

This operating instructions manual contains the product descriptions in the main text.

•main points

➤instructions

and safety information are indicated by pictograms (see chap. 2).

NOTE

Working guidelines.

Major Components

Illustrated views of Beta®

Page 2

Fig. 01

Page 1

3.1

3.2

3.3

3.4

3.5

1 2 3

ProMinent®

Major Components

1Control unit

1a Stroke length adjustment knob

1b Red LED display, fault indicator

1c Yellow LED display, warning indicator

1d Green LED display, operating status

1e Multifunction switch

1f Mains connector

1g External operating terminal

1h Float switch connector

2Power end

2a Relay insertion point

2b Optional relay

3Liquid end

3.1 Liquid end without bleed valve, with/without valve spring

3.2 Liquid end without bleed valve, with/without valve spring

3.3 Liquid end with bleed valve, with/without valve spring (PP-version)

3.4 Liquid end with bleed valve, with/without valve spring (NP-version)

3.5 Self-degassing liquid end

3a Liquid end back plate

3b Liquid end

3c Suction connection

3d Discharge connection

3e Bleed valve connection (self degassing liquid ends)

3f Bleeding/fine bleeding valve

3g Bypass tubing nozzle

BA_BE_021_07_08_GB1.p65 04.08.2008, 8:03 Uhr1

ProMinent®Page 3

Table of Contents

Page

1 Application ............................................................................. 4

2 Safety ..................................................................................... 4

2.1 Identification of the notes on safety .............................. 4

2.2 Safety Guidelines ........................................................... 5

2.3 Sound intensity level ...................................................... 5

2.4 EC Declaration of Conformity ........................................ 6

3Design and Function ............................................................. 7

4Technical Data ....................................................................... 8

4.1 Identcode ....................................................................... 8

4.2 Sizes and Weights ......................................................... 9

4.3 Capacity Data ................................................................ 12

4.4 Reproducibility ............................................................... 14

4.5 Viscosity ......................................................................... 14

4.6 Materials Information ..................................................... 14

4.7 Electrical Data ................................................................ 14

4.8 Environmental Conditions .............................................. 15

5Removal of Packaging.......................................................... 16

6Electrical Installation ............................................................ 16

7Operation and Settings ........................................................ 17

7.1 Operating Components and Functions ......................... 17

7.2 Beta®Relay Retrofit Kit .................................................. 20

8Maintenance .......................................................................... 24

9Repairs ................................................................................... 24

10 Troubleshooting .................................................................... 29

11 Decommissioning, Dismantling and Disposal ................... 29

Appendix: ...................................................................................... 30

Exploded diagrams of liquid ends .......................................... 30

BA_BE_021_07_08_GB2.p65 17.07.2008, 14:35 Uhr3

ProMinent®

Page 4

1 Application

The pumps in the ProMinent® Beta®series are microprocessor controlled solenoid metering

pumps.

Liquid media They offer highly accurate reproducible metering in the dosing of liquid chemicals in pressurised

pipe systems and into open and closed containers.

Compatibility Specified components/accessories in the Beta®pump series are compatible with those in the

CONCEPT, gamma-Classic and gamma series as follows:

•Signal cable: gamma/Vario two core, and four core for ”external“ function

•Two stage float switch (gamma/Vario)

• gamma discharge line

•Standard gamma connector set

•gamma wall mounting bracket

•Feed container and fixing plates

•Total height (distance between suction and discharge line connectors)

•Distance between the connectors and mounting holes on the pump

• Identical accessories used, e.g. back pressure valves, multifunction valves and flushing

apparatus.

Correct use of equipment

•The Beta®may be used only to meter liquids.

• The pump is not designed for use with gaseous chemicals or suspended solids.

•Take care when using aggressive chemicals that the materials used in the pump are resistant

to those chemicals (see ProMinent®Chemical Resistance List in the product catalogue or

under www.prominent.com).

•All other applications or modifications are prohibited.

•The pump may only be used for applications which correspond to the technical data and

specifications described in the operating instructions manual.

•The pump is not designed for use in explosion-hazardous locations.

• The Beta®should be operated by suitably trained and authorised personnel only.

2Safety

2.1 Identification of the notes on safety

The following terms are used in the present operating instructions to indicate the various severity

levels of the danger:

WARNING: Characterizes a possibly hazardous situation. Your life is in danger and there

is a danger of serious injury if these notes are disregarded!

CAUTION: Characterizes a possibly hazardous situation. There is a danger of slight or

minor injury or damage to property if these notes are disregarded.

The following warning signs are used in the present operating instructions to indicate different

types of danger:

Warning of danger area.

Application / Safefy

BA_BE_021_07_08_GB2.p65 17.07.2008, 14:35 Uhr4

ProMinent®Page 5

Safety

2.2 Safety Guidelines

WARNING

•In emergencies the pump should be switched off immediately! Disconnect the power

cable from the power supply!

•Do not dispatch pumps which are designed for use with radioactive chemicals!

•When using pumps with flammable chemicals, observe the relevant regulations

concerning the transport and storage of flammable fluids (Ex, Vo, Vb F)!

•When installing outside Germany, always observe relevant national regulations!

•

Combining ProMinent

metering pumps with parts not approved and tested by ProMinent

is not permissible. It can cause injury or damage to persons or materials for which we

cannot accept liability!

CAUTION

•Pumps must be accessible at all times for both operating and servicing. Access must

not be obstructed in any way!

•The pumps and peripherals must be serviced and repaired by qualified and authorised

persons only!

•Always de-pressurise the liquid end prior to working on a pump!

•Empty and rinse the liquid end before working on a pump which has been used with

hazardous or unknown chemicals!

•Always read chemical safety data!

•Always wear protective clothing when handling hazardous or unknown chemicals!

2.3 Sound intensity level

The sound intensity level is < 70 dB (A) at maximum stroke, maximum stroke rate, maximum

back pressure (water) in accordance with

DIN EN 12639 (Metering Pump Noise Measurement)

BA_BE_021_07_08_GB2.p65 17.07.2008, 14:35 Uhr5

ProMinent®

Page 6

Safety

2.4 EC Declaration of Conformity

BA_BE_021_07_08_GB2.p65 17.07.2008, 14:35 Uhr6

ProMinent®Page 7

Design and Function

3Design and Function

Main components Operating panel

Power end

Liquid end

Operating Principle Chemical feed occurs as a result of pulsed deflections of the dosing diaphragm within the liquid

end, which causes pressure differentiation between the suction side, the liquid end cavity and the

discharge side. The pressure differentiation causes the suction and discharge self-acting valves

to open and close, resulting in chemical feed.

The dosing diaphragm is driven by an electromagnet, which is stimulated and controlled by a

microprocessor.

Pump Capacity The feed rate is determined by the stroke length and stroking rate.

The stroke length is adjustable between 0 % and 100 % using the stroke length adjustment knob.

However reproducibility is only technically practicable in the adjustment range of between 30 %

and 100 %.

Stroking rate is adjustable in 10 % steps between 0 % and 100 % using the multifunction switch.

This gives a higher rate of reproducible metering accuracy.

Operating Modes Operating modes are selected using the multifunction switch.

Three LED displays indicate operating and fault status.

Internal operating mode: ”Manual“:

Stroking rate is manually adjustable in 10 % steps via the multifunction switch.

”External“ operating mode:

Allows adjustment of individual strokes via the external operating mode terminal by means of

contact or semi-operating devices.

Functions ”Auxiliary Frequency“ function:

Enables activation of optionally selectable and programmable stroking rate, controlled via the

external operating mode terminal. This stroking rate overrides ”Manual“ and ”External“ operating

modes.

In the standard version the ”Auxiliary Frequency“ function is programmed to 100 % stroking rate.

”Pause“ function:

The external operating terminal can be used to operate a remote pump stop function.

”Stop“ function:

This function allows the pump to be deactivated without disconnecting from the power supply.

”Test“ function:

This function checks the priming function of the pump. The switch setting ”Test“ on the

multifunction switch is self-locking.

Self-degassing Self-degassing metering pumps are used in closed discharge lines to create suction and to direct

trapped air to bypass lines, and/or remove gas emitted by gaseous chemicals during operation,

independently of existing back pressure.

Installing a back pressure valve ensures precise chemical feed can be achieved, even when

operating under atmospheric pressure.

Options The float switch connector can be used to connect a two stage float switch.

There is also optionally available a relay terminal for an alarm indicating relay, and a switch output

which is synchronised to each stroke.

BA_BE_021_07_08_GB2.p65 17.07.2008, 14:35 Uhr7

ProMinent®

Page 8

Technical Data

4Technical Data

4.1 Identcode

Please enter the identcode on the device label into the grey box below.

Fig. 02

FPM = Fluorine Rubber

Series Type

Material

PP Polypropylene

NP Acrylic/PVC

PV PVDF

TT PTFE with carbon

SS stainless steel

BT4A 1000, 1601, 1602, 1005, 0708, 0413, 0220

BT5A 0000, 0000, 0000, 1605, 1008, 0713, 0420, 0232

Custom version

. . . . . . . . . . . . . . . . .

Custom version

. . . . . . . . . . . . . . . . .

0no options . . . . . . . . . . . . . . .

_ _ _ _ _ _ ____________

_ _ _ _ _ _ _

Diaphragm and Seal

E standard with EPDM seals

B standard with FPM seals

T standard with PTFE flat seals

Liquid end Version

0 no bleed valve, no valve springs

1 no bleed valve, with valve springs

2 with bleed valve, no valve springs for PP, NP and PV only

3 with bleed valve, with valve springs for PP only

4 no-vent with valve springs for highly viscous media

9self-degassing for PP and NP

Hydraulic Connections

0standard connections

Version

0with ProMinent®logo

Electrical Connections

A200–230 V, ±10 %

B100–115 V, ±10 %

U100–230 V, ±10 %

M 12....24 V DC (only BT4a)

N 24 V DC (only BT5a)

P 24 V AC

Cable and Plug

A2 m European

B2m Swiss

C2m Australian

D2m USA

12m open end

Relay

0no relay

1fault indicating relay (N/C)

3fault indicating relay (N/O)

4 as 1 + pacing relay

5 as 3 + pacing relay

Custom version . . . . . . . . . . . . . . . . . . . .

Accessories

0no accessories

1 with foot and delivery valve, 2 m PVC tubing,

5 m PE tubing

Custom version . . . . . . . . . . . . . . . . . . . .

Custom version

. . . . . . . . . . . . . . . . .

Custom version

. . . . . . . . . . . . . . . . .

Custom version

. . . . . . . . . . . . . . . . .

Custom version

. . . . . . . . . . . . . . . . .

Custom version

. . . . . . . . . . . . . . . . .

Custom version

. . . . . . . . . . . . . . . . .

Control type

0no lock

1 with lock; manual operation locked when external

cable plugged in

Options on request Custom version

0no options . . . . . . . . . . . . . . .

BA_BE_021_07_08_GB2.p65 17.07.2008, 14:35 Uhr8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ProMinent Wasserpumpe Handbücher

ProMinent

ProMinent concept plus Bedienungsanleitung

ProMinent

ProMinent DFB13 Bedienungsanleitung

ProMinent

ProMinent Beta BT4b Bedienungsanleitung

ProMinent

ProMinent Duodos 20 PPS Bedienungsanleitung

ProMinent

ProMinent mikro g/5a Bedienungsanleitung

ProMinent

ProMinent Sigma2 S2Cb Bedienungsanleitung

ProMinent

ProMinent Sigma 1 Basic Bedienungsanleitung

ProMinent

ProMinent Duodos 10 Bedienungsanleitung

ProMinent

ProMinent gamma/ L Bedienungsanleitung

ProMinent

ProMinent alpha ALPc 1001 Bedienungsanleitung

ProMinent

ProMinent alpha Series Betriebsanleitung

ProMinent

ProMinent delta DLTa optoDrive Bedienungsanleitung

ProMinent

ProMinent alpha Betriebsanleitung

ProMinent

ProMinent Sigma 3 Basic Bedienungsanleitung

ProMinent

ProMinent S1Cb Bedienungsanleitung

ProMinent

ProMinent Dulco Flex DF2a Bedienungsanleitung

ProMinent

ProMinent SCKa Series Bedienungsanleitung

ProMinent

ProMinent delta Betriebsanleitung

ProMinent

ProMinent DULCO flex Control Bedienungsanleitung

ProMinent

ProMinent Makro/ 5 M5Ka Bedienungsanleitung

ProMinent

ProMinent Dulco Flex DF2a Bedienungsanleitung

ProMinent

ProMinent ProMinent von Taine 0807 PP Bedienungsanleitung

ProMinent

ProMinent DULCOflex DF4a Bedienungsanleitung

ProMinent

ProMinent Sigma 2 S2Cb Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung