ProMinent Dulco flex DFBa Series Bedienungsanleitung

DULCO®flex DFBa

Peristaltic Pump

Operating instructions

Original operating instructions (2006/42/EC)Part no. 986228 BA DX 009 02/10 EN

Please carefully read these operating instructions before use! · Do not discard!

The operator shall be liable for any damage caused by installation or operating errors!

Technical changes reserved.

986228, 1, en_GB

ProMinent Dosiertechnik Heidelberg GmbH

Im Schuhmachergewann 5 - 11

69123 Heidelberg Germany

Telephone: +49 6221 842-0

Fax: +49 6221 842-419

email: [email protected]

Internet: www.prominent.com

Table of contents

1Introduction........................................................................... 4

1.1 Explanation of the Safety Information........................... 4

1.2 Users' qualifications...................................................... 5

1.3 ID Code......................................................................... 6

1.3.1 Identcode DULCO®flex DFBa 010............................. 6

1.3.2 Identcode DULCO®flex DFBa 013............................. 8

1.3.3 Identcode DULCO®flex DFBa 016........................... 10

1.3.4 Identcode DULCO®flex DFBa 019........................... 12

1.3.5 Identcode DULCO®flex DFBa 022........................... 13

2 Safety and responsibility..................................................... 16

2.1 General safety information.......................................... 16

3 Functional description......................................................... 19

3.1 Construction................................................................ 19

3.2 Overview of the Device............................................... 20

4 Transport, storage, assembly and Installation.................... 21

4.1 Transport.................................................................... 21

4.2 Storage....................................................................... 21

4.3 Assembly.................................................................... 21

4.3.1 Ambient conditions.................................................. 22

4.3.2 Alignment of the suction side................................... 22

4.3.3 Alignment of the discharge side............................... 23

4.3.4 Adjusting the roller pressure.................................... 23

4.3.5 Performance curves................................................. 26

5 Commissioning................................................................... 29

5.1 Testing prior to commissioning the pump................... 29

6 Operating the DFBa............................................................ 30

7Maintenance, repair, malfunctions, disposal and spare

parts.................................................................................... 31

7.1 Maintenance............................................................... 31

7.2 Exchanging the pump hoses...................................... 31

7.3 Troubleshooting.......................................................... 32

7.4 Disposal of Used Parts............................................... 34

7.5 Spare parts................................................................. 34

8 Technical data DFBa.......................................................... 43

8.1 Dimensions DFBa 010 / 013....................................... 43

8.2 Dimensions DFBa 016 / 019....................................... 44

8.3 Dimensions DFBa 022................................................ 45

9 DFBa technical appendices................................................ 46

9.1 Declaration of Conformity........................................... 46

10 Index................................................................................... 47

Table of contents

1 Introduction

These operating instructions provide information on the technical

data and functions of the DULCOMETER® BFDa series peristaltic

pump.

1.1 Explanation of the Safety Information

These operating instructions provide information on the technical

data and functions of the product. These operating instructions

provide detailed safety information and are provided as clear step-

by-step instructions.

The safety information and notes are categorised according to the

following scheme. A number of different symbols are used to

denote different situations. The symbols shown here serve only as

examples.

DANGER!

Nature and source of the danger

Consequence: Fatal or very serious injuries.

Measure to be taken to avoid this danger.

Danger!

–Denotes an immediate threatening danger. If this is

disregarded, it will result in fatal or very serious

injuries.

WARNING!

Nature and source of the danger

Possible consequence: Fatal or very serious injuries.

Measure to be taken to avoid this danger.

Warning!

–Denotes a possibly hazardous situation. If this is

disregarded, it could result in fatal or very serious

injuries.

CAUTION!

Nature and source of the danger

Possible consequence: Slight or minor injuries. Mate‐

rial damage.

Measure to be taken to avoid this danger.

Caution!

–Denotes a possibly hazardous situation. If this is

disregarded, it could result in slight or minor inju‐

ries. May also be used as a warning about material

damage.

Introduction

NOTICE!

Nature and source of the danger

Damage to the product or its surroundings.

Measure to be taken to avoid this danger.

Note!

–Denotes a possibly damaging situation. If this is

disregarded, the product or an object in its vicinity

could be damaged.

Type of information

Hints on use and additional information.

Source of the information. Additional measures.

Information!

–

Denotes hints on use and other useful information.

It does not indicate a hazardous or damaging

situation.

1.2 Users' qualifications

WARNING!

Danger of injury with inadequately qualified personnel!

The operator of the plant / device is responsible for

ensuring that the qualifications are fulfilled.

If inadequately qualified personnel work on the unit or

loiter in the hazard zone of the unit, this could result in

dangers that could cause serious injuries and material

damage.

– All work on the unit should therefore only be

conducted by qualified personnel.

–Unqualified personnel should be kept away from

the hazard zone

Training Definition

Instructed personnel An instructed person is deemed to be a person who has been

instructed and, if required, trained in the tasks assigned to him/her and

possible dangers that could result from improper behaviour, as well as

having been instructed in the required protective equipment and

protective measures.

Trained user A trained user is a person who fulfils the requirements made of an

instructed person and who has also received additional training

specific to the system from ProMinent or another authorised distribu‐

tion partner.

Trained qualified personnel A qualified employee is deemed to be a person who is able to assess

the tasks assigned to him and recognize possible hazards based on

his/her training, knowledge and experience, as well as knowledge of

pertinent regulations. The assessment of a person's technical training

can also be based on several years of work in the relevant field.

Introduction

Training Definition

Electrician Electricians are deemed to be people, who are able to complete work

on electrical systems and recognize and avoid possible hazards inde‐

pendently based on his/her technical training and experience, as well

as knowledge of pertinent standards and regulations.

Electricians should be specifically trained for the working environment

in which the are employed and know the relevant standards and regu‐

lations.

Electricians must comply with the provisions of the applicable statutory

directives on accident prevention.

Customer Service department Customer Service department refers to service technicians, who have

received proven training and have been authorised by ProMinent to

work on the system.

Note for the system operator

The pertinent accident prevention regulations, as well

as all other generally acknowledged safety regulations,

must be adhered to!

1.3 ID Code

1.3.1 Identcode DULCO®flex DFBa 010

Identcode

DFBa DULCO®flex DFBa 010

Type

010 DFBa 010, 0.024 l/revolution

Drive

000 Pump without drive

Step-down gears / 3 x 230 / 400 VAC

A10 0.12 kW, 15 1/min, 21 l/h, 8 bar

A11 0.12 kW, 20 1/min, 28 l/h, 8 bar

A12 0.18 kW, 29 1/min, 41 l/h, 8 bar

A13 0.18 kW, 46 1/min, 66 l/h, 4 bar

A14 0.25 kW, 57 1/min, 82 l/h, 4 bar

A15 0.25 kW, 70 1/min, 100 l/h, 2 bar

A16 0.25 kW, 85 1/min, 122 l/h, 2 bar

Manual adjustment gears / 3 x 230 / 400 VAC

A21 0.15 kW, 3-16 1/min, 4-23 l/h, 8 bar

A22 0.25 kW, 5-29 1/min, 7-41 l/h, 8 bar

A23 0.25 kW, 10-53 1/min, 14-76 l/h, 4 bar

A24 0.25 kW, 15-80 1/min, 21-115 l/h, 2 bar

Device identification / Identcode

Introduction

Identcode

DFBa DULCO®flex DFBa 010

Adjustment gears with integrated frequency converter / 1x 230 VAC

A31 0.37 kW, 9-34 1/min, 12-48 l/h, 8 bar

A32 0.37 kW, 16-60 1/min, 23-86 l/h, 4 bar

A33 0.37 kW, 28-105 1/min, 40-151 l/h, 1 bar

Adjustment gears (external frequency converter required) / 3 x 230 / 400 VAC

A41 0.18 kW, 0-23 1/min, 0-33 l/h, 8 bar

A42 0.18 kW, 0-38 1/min, 0-54 l/h, 8 bar

A43 0.25 kW, 0-60 1/min, 0-86 l/h, 4 bar

A44 0.25 kW, 0-91 1/min, 0-131 l/h, 1 bar

Hose material

0 NR

B NBR

E EPDM

R NR-A

N Norprene (max. 2 bar)

A NBR-A

H Hypalon

Hydraulic connection

A VA BSP 3/8"

B VA NPT 3/8"

C PP BSP 3/8"

D PVDF BSP 3/8"

E PVDF NPT 3/8"

F PVC NPT 3/8"

G Tri-Clamp, VA, 1/2"

H DIN 11851, VA NW10

Base plate

0 Base plate, lacquered steel

1 Base plate, stainless steel

2 Portable unit + lacquered steel base plate

3 Portable unit + stainless steel base plate

Leakage sensor

0 without leakage sensor

L with leakage sensor

Rotor

0 Rotor with 2 rollers

Introduction

Identcode

DFBa DULCO®flex DFBa 010

Batch control

0 Without batch control

C With batch control

Special version

0 Standard

H Halar-coated housing

Vacuum system

0 none

Certification

01 CE mark

1.3.2 Identcode DULCO®flex DFBa 013

Identcode

DFBa DULCO®flex DFBa 013

Type

013 DFBa 013, 0.039 l/revolution

Drive

000 Pump without drive

Step-down gears / 3 x 230 / 400 VAC

B10 0.12 kW, 15 1/min, 35 l/h, 8 bar

B11 0.12 kW, 20 1/min, 46 l/h, 8 bar

B12 0.18 kW, 29 1/min, 67 l/h, 8 bar

B13 0.18 kW, 46 1/min, 107 l/h, 4 bar

B14 0.25 kW, 57 1/min, 133 l/h, 4 bar

B15 0.25 kW, 70 1/min, 163 l/h, 2 bar

B16 0.25 kW, 85 1/min, 198 l/h, 2 bar

Manual adjustment gears / 3 x 230 / 400 VAC

B21 0.15 kW, 3-16 1/min, 7-37 l/h, 8 bar

B22 0.25 kW, 5-29 1/min, 11-67 l/h, 8 bar

B23 0.25 kW, 10-53 1/min, 23-124 l/h, 4 bar

B24 0.25 kW, 15-80 1/min, 35-187 l/h, 2 bar

Adjustment gears with integrated frequency converter / 1 x 230 VAC

B31 0.37 kW, 9-34 1/min, 21-79 l/h, 8 bar

B32 0.37 kW, 16-60 1/min, 37-140 l/h, 4 bar

B33 0.37 kW, 28-105 1/min, 65-245 l/h, 1 bar

Introduction

Identcode

DFBa DULCO®flex DFBa 013

Adjustment gears (external frequency converter required) / 3 x 230 / 400 VAC

B41 0.18 kW, 0-23 1/min, 0-53 l/h, 8 bar

B42 0.18 kW, 0-38 1/min, 0-88 l/h, 8 bar

B43 0.25 kW, 0-60 1/min, 0-140 l/h, 4 bar

B44 0.25 kW, 0-91 1/min, 0-212 l/h, 1 bar

Hose material

0 NR

B NBR

E EPDM

R NR-A

N Norprene (max. 2 bar)

A NBR-A

H Hypalon

Hydraulic connection

A VA BSP 3/8"

B VA NPT 3/8"

C PP BSP 3/8"

D PVDF BSP 3/8"

E PVDF NPT 3/8"

F PVC NPT 3/8"

G Tri-Clamp, VA, 1/2"

H DIN 11851, VA NW15

Base plate

0 Base plate, lacquered steel

1 Base plate, stainless steel

2 Portable unit + lacquered steel base plate

3 Portable unit + stainless steel base plate

Leakage sensor

0 without leakage sensor

L with leakage sensor

Rotor

0 Rotor with 2 rollers

Batch control

0 Without batch control

C With batch control

Special version

Introduction

Identcode

DFBa DULCO®flex DFBa 013

0 Standard

H Halar-coated housing

Vacuum system

0 none

Certification

01 CE mark

1.3.3 Identcode DULCO®flex DFBa 016

Identcode

DFBa DULCO®flex DFBa 016

Type

016 DFBa 016, 0.092 l/revolution

Drive

000 Pump without drive

Step-down gears / 3 x 230 / 400 VAC

C10 0.18 kW, 14 1/min, 77 l/h, 8 bar

C11 0.18 kW, 20 1/min, 110 l/h, 8 bar

C12 0.25 kW, 32 1/min, 176 l/h, 8 bar

C13 0.25 kW, 46 1/min, 253 l/h, 4 bar

C14 0.37 kW, 57 1/min, 314 l/h, 4 bar

C15 0.37 kW, 70 1/min, 386 l/h, 2 bar

C16 0.37 kW, 85 1/min, 469 l/h, 2 bar

Manual adjustment gears / 3 x 230 / 400 VAC

C21 0.37 kW, 8-50 1/min, 44-276 l/h, 4 bar

C22 0.37 kW, 10-61 1/min, 55-336 l/h, 2 bar

C23 0.37 kW, 16-91 1/min, 88-502 l/h, 1 bar

Adjustment gears with integrated frequency converter / 1 x 230 VAC

C31 0.37 kW, 9-34 1/min, 49-187 l/h, 8 bar

C32 0.37 kW, 16-60 1/min, 88-331 l/h, 2 bar

C33 0.37 kW, 28-105 1/min, 154-579 l/h, 1 bar

Adjustment gears (external frequency converter required) / 3 x 230 / 400 VAC

C41 0.25 kW, 0-23 1/min, 0-126 l/h, 8 bar

C42 0.25 kW, 0-42 1/min, 0-231 l/h, 4 bar

C43 0.37 kW, 0-60 1/min, 0-331 l/h, 2 bar

C44 0.37 kW, 0-91 1/min, 0-502 l/h, 1 bar

Introduction

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ProMinent Wasserpumpe Handbücher

ProMinent

ProMinent Vario Series Bedienungsanleitung

ProMinent

ProMinent Vario C Bedienungsanleitung

ProMinent

ProMinent Hydro 2 Series Bedienungsanleitung

ProMinent

ProMinent Dulco Flex DF2a Bedienungsanleitung

ProMinent

ProMinent Beta b BT4b Series Bedienungsanleitung

ProMinent

ProMinent Meta MTKa Bedienungsanleitung

ProMinent

ProMinent DULCOflex DFAa 003 Bedienungsanleitung

ProMinent

ProMinent Plasma PSMa Bedienungsanleitung

ProMinent

ProMinent gamma/ X GMXa Bedienungsanleitung

ProMinent

ProMinent EXtronic EXBb Bedienungsanleitung

ProMinent

ProMinent EXtronic EXBb Series Bedienungsanleitung

ProMinent

ProMinent DULCOnneX Bedienungsanleitung

ProMinent

ProMinent Sigma2 S2Cb Bedienungsanleitung

ProMinent

ProMinent DULCO flex Control Bedienungsanleitung

ProMinent

ProMinent delta DLTa optoDrive Bedienungsanleitung

ProMinent

ProMinent Duodos 50 PPS Bedienungsanleitung

ProMinent

ProMinent Sigma 3 Basic Bedienungsanleitung

ProMinent

ProMinent DULCO flex DFAa Bedienungsanleitung

ProMinent

ProMinent Hydro/ 2 Bedienungsanleitung

ProMinent

ProMinent Hydro/ 4 Bedienungsanleitung

ProMinent

ProMinent Sigma / 2 Basic S2Ba Bedienungsanleitung

ProMinent

ProMinent DFB13 Bedienungsanleitung

ProMinent

ProMinent DULCO flex Control - DFXa Bedienungsanleitung

ProMinent

ProMinent Makro/ 5 M5Ka Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung