ProMinent DULCOflex DFDa Bedienungsanleitung

DULCOflex DFDa

Peristaltic Pump

Operating instructions

A0381

Original Operating Instructions (2006/42/EC)Part no. 986226 Version: BA DX 039 10/21 EN

Please carefully read these operating instructions before use. · Do not discard.

The operator shall be liable for any damage caused by installation or operating errors.

The latest version of the operating instructions are available on our homepage.

In order to make it easier to read, this document uses the male

form in grammatical structures but with an implied neutral sense. It

is aimed equally at both men and women. We kindly ask female

readers for their understanding in this simplification of the text.

Please read the supplementary information in its entirety.

Information

This provides important information relating to the

correct operation of the unit or is intended to make

your work easier.

Safety Information

The safety information includes detailed descriptions of the haz‐

ardous situation, see

Ä Chapter 1.1 ‘Explanation of the safety

information’ on page 4

The following symbols are used to highlight instructions, links, lists,

results and other elements in this document:

Tab. 1: More symbols

Symbol Description

Action, step by step

⇨Outcome of an action

Links to elements or sections of these instructions or other applicable documents

nList without set order

[Button]

Display element (e.g. indicators)

Operating element (e.g. button, switch)

‘Display /GUI’

Screen elements (e.g. buttons, assignment of function keys)

CODE Presentation of software elements and/or texts

General non-discriminatory approach

Supplementary information

Supplemental directives

Table of contents

1 Introduction........................................................................... 4

1.1 Explanation of the safety information............................ 4

1.2 Users' qualifications...................................................... 5

1.3 Identity Code for DULCO®flex DFDa 025..................... 7

1.4 Identity Code for DULCO®flex DFDa 032..................... 9

1.5 Identity Code for DULCO®flex DFDa 040................... 11

1.6 Identity Code for DULCO®flex DFDa 060................... 13

1.7 Identity Code for DULCO®flex DFDa 070................... 15

1.8 Identity Code for DULCO®flex DFDa 080................... 17

1.9 Identity Code for DULCO®flex DFDa 100................... 19

2 Safety and responsibility..................................................... 21

2.1 General safety information.......................................... 21

3 Functional description......................................................... 24

3.1 Overview of the device............................................... 24

3.2 Construction................................................................ 25

4 Transport, storage, assembly and Installation.................... 26

4.1 Transport.................................................................... 26

4.2 Storage....................................................................... 27

4.3 Assembly.................................................................... 28

4.3.1 Ambient conditions.................................................. 28

4.3.2 Alignment of the suction side................................... 29

4.3.3 Alignment of the discharge side............................... 29

4.3.4 Adjusting the shoe pressure.................................... 29

4.3.5 Performance curves................................................. 33

4.3.6 Commissioning........................................................ 36

5 Operating the DFDa............................................................ 38

6 Maintenance, repair, troubleshooting, disposal and spare

parts.................................................................................... 39

6.1 Maintenance............................................................... 39

6.2 Exchanging the pump hoses...................................... 39

6.3 Troubleshooting.......................................................... 41

6.4 Disposal of Used Parts............................................... 42

6.5 Spare parts................................................................. 43

7 DFDa Technical Data.......................................................... 57

7.1 Dimensions DFDa 025................................................ 58

7.2 Dimensions DFDa 032................................................ 59

7.3 Dimensions DFDa 040................................................ 60

7.4 Dimensions DFDa 060................................................ 61

7.5 Dimensions DFDa 070................................................ 62

7.6 Dimensions DFDa 080................................................ 63

7.7 Dimensions DFDa 100................................................ 64

8 Technical appendices for the DFDa.................................... 65

8.1 EC Declaration of Conformity for Machinery.............. 65

9 Index................................................................................... 66

Table of contents

1 Introduction

These operating instructions provide information on the technical

data and functions of the DULCO®flex peristaltic pump from the

DFDa product range.

1.1 Explanation of the safety information

These operating instructions provide information on the technical

data and functions of the product. These operating instructions pro‐

vide detailed safety information and are provided as clear step-by-

step instructions.

The safety information and notes are categorised according to the

following scheme. A number of different symbols are used to

denote different situations. The symbols shown here serve only as

examples.

DANGER!

Nature and source of the danger

Consequence: Fatal or very serious injuries.

Measure to be taken to avoid this danger

Danger!

– Denotes an immediate threatening danger. If

this is disregarded, it will result in fatal or very

serious injuries.

WARNING!

Nature and source of the danger

Possible consequence: Fatal or very serious inju‐

ries.

Measure to be taken to avoid this danger

Warning!

– Denotes a possibly hazardous situation. If this

is disregarded, it could result in fatal or very

serious injuries.

CAUTION!

Nature and source of the danger

Possible consequence: Slight or minor injuries,

material damage.

Measure to be taken to avoid this danger

Caution!

– Denotes a possibly hazardous situation. If this

is disregarded, it could result in slight or minor

injuries. May also be used as a warning about

material damage.

Introduction

NOTICE!

Nature and source of the danger

Damage to the product or its surroundings

Measure to be taken to avoid this danger

Note!

– Denotes a possibly damaging situation. If this

is disregarded, the product or an object in its

vicinity could be damaged.

Type of information

Hints on use and additional information

Source of the information, additional measures

Information!

–

Denotes hints on use and other useful informa‐

tion. It does not indicate a hazardous or dam‐

aging situation.

1.2 Users' qualifications

WARNING!

Danger of injury with inadequately qualified per‐

sonnel!

The operator of the plant / device is responsible for

ensuring that the qualifications are fulfilled.

If inadequately qualified personnel work on the unit

or loiter in the hazard zone of the unit, this could

result in dangers that could cause serious injuries

and material damage.

– All work on the unit should therefore only be

conducted by qualified personnel.

– Unqualified personnel should be kept away

from the hazard zone

Training Definition

Instructed personnel An instructed person is deemed to be a person who has been instructed and,

if required, trained in the tasks assigned to him/her and possible dangers that

could result from improper behaviour, as well as having been instructed in the

required protective equipment and protective measures.

Trained user A trained user is a person who fulfils the requirements made of an instructed

person and who has also received additional training specific to the system

from ProMinent or another authorised distribution partner.

Trained qualified per‐

sonnel

A qualified employee is deemed to be a person who is able to assess the

tasks assigned to him and recognize possible hazards based on his/her

training, knowledge and experience, as well as knowledge of pertinent regula‐

tions. The assessment of a person's technical training can also be based on

several years of work in the relevant field.

Introduction

Training Definition

Electrician Electricians are deemed to be people, who are able to complete work on elec‐

trical systems and recognize and avoid possible hazards independently based

on his/her technical training and experience, as well as knowledge of pertinent

standards and regulations.

Electricians should be specifically trained for the working environment in

which the are employed and know the relevant standards and regulations.

Electricians must comply with the provisions of the applicable statutory direc‐

tives on accident prevention.

Customer Service depart‐

ment

Customer Service department refers to service technicians, who have

received proven training and have been authorised by ProMinent to work on

the system.

Note for the system operator

The pertinent accident prevention regulations, as

well as all other generally acknowledged safety

regulations, must be adhered to!

Introduction

1.3 Identity Code for DULCO®flex DFDa 025

Identity code

DFDa DULCO®flex DFDa 025

Type

025 DFDa 025, 0.3 l/revolution

Power end/drive

000 Pump without power end/drive

Reduction gear system / 3 x 230 / 400 VAC

A11 0.55 kW, 18 rpm, 324 l/h, 15 bar

A12 0.75 kW, 28 rpm, 504 l/h, 15 bar

A13 0.75 kW, 39 rpm, 702 l/h, 10 bar

A14 0.75 kW, 45 rpm, 810 l/h, 5 bar

A15 1.10 kW, 55 rpm, 990 l/h, 5 bar

Gear motor with integrated frequency converter / 1x 230 VAC

A31 1.10 kW, 16 ... 55 rpm, 288 ... 990 l/h, 20 ... 70 Hz, 5 bar

A32 1.50 kW, 18 ... 63 rpm, 324 ... 1134 l/h, 20 ... 70 Hz, 5 bar

Gear motor (external frequency converter required) / 3 x 230 / 400 VAC

A41 0.75 kW, 4 ... 36 rpm, 72 ... 648 l/h, 7 ... 65 Hz, 15 bar

A42 1.10 kW, 6 ... 58 rpm, 108 ... 1044 l/h, 7 ... 65 Hz, 5 bar

A43 1.50 kW, 9 ... 86 rpm, 162 ... 1548 l/h, 7 ... 65 Hz, 5 bar

Hose material

0 NR

B NBR

E EPDM

Hydraulic connector

I DIN flange, VA, DN25

J DIN flange, PP, DN25

K DIN flange PVDF/PTFE, DN25

L ANSI flange, VA, 1"

Base plate

0 Base plate, lacquered steel

1 Base plate, stainless steel

2 Portable unit + lacquered steel base plate

3 Portable unit + stainless steel base plate

Leakage sensor

0 without leakage sensor

L with leakage sensor

M with leakage sensor + relay output

Introduction

Identity code

DFDa DULCO®flex DFDa 025

Rotor

0 Rotor with 2 shoes

Batch control

0 No batch control

Special version

0 Standard

HHousing, Halar® coated

Vacuum system

0 none

V with vacuum system

Approvals

01 CE mark

Introduction

1.4 Identity Code for DULCO®flex DFDa 032

Identity code

DFDa DULCO®flex DFDa 032

Type

032 DFDa 032, 0.625 l/revolution

Power end/drive

000 Pump without power end/drive

Reduction gear system / 3 x 230 / 400 VAC

B11 0.75 kW, 21 rpm, 787 l/h, 10 bar

B12 1.10 kW, 21 rpm, 787 l/h, 15 bar

B13 1.10 kW, 30 rpm, 1125 l/h, 10 bar

B14 1.10 kW, 38 rpm, 1425 l/h, 10 bar

B15 1.50 kW, 47 rpm, 1762 l/h, 5 bar

B16 1.50 kW, 58 rpm, 2175 l/h, 5 bar

Gear motor with integrated frequency converter / 1x 230 VAC

B31 1.50 kW, 12 ... 42 rpm, 450 ... 1575 l/h, 20 ... 70 Hz, 7.5 bar

B32 2.20 kW, 19 ... 66 rpm, 712 ... 2475 l/h, 20 ... 70 Hz, 5 bar

Gear motor (external frequency converter required) / 3 x 230 / 400 VAC

B41 1.10 kW, 4 ... 39 rpm, 150 ... 1462 l/h, 7 ... 65 Hz, 7.5 bar

B42 1.50 kW, 5 ... 49 rpm, 190 ... 1837 l/h, 7 ... 65 Hz, 7.5 bar

B43 2.20 kW, 8 ... 75 rpm, 300 ... 2812 l/h, 7 ... 65 Hz, 5 bar

Hose material

0 NR

B NBR

E EPDM

Hydraulic connector

I DIN flange VA DN32

J DIN flange, PP, DN32

K DIN flange, PVDF/PTFE, DN32

L ANSI flange, VA, 1 1/4"

Base plate

0 Base plate, lacquered steel

1 Base plate, stainless steel

2 Portable unit + lacquered steel base plate

3 Portable unit + stainless steel base plate

Leakage sensor

0 without leakage sensor

L with leakage sensor

Introduction

Identity code

DFDa DULCO®flex DFDa 032

M with leakage sensor + relay output

Rotor

0 Rotor with 2 shoes

Batch control

0 No batch control

Special version

0 Standard

HHousing, Halar® coated

Vacuum system

0 none

V with vacuum system

Approvals

01 CE mark

Introduction

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ProMinent Wasserpumpe Handbücher

ProMinent

ProMinent alpha Betriebsanleitung

ProMinent

ProMinent gamma/l Handbuch

ProMinent

ProMinent Orlita Evolution Bedienungsanleitung

ProMinent

ProMinent Beta b BT4b Series Bedienungsanleitung

ProMinent

ProMinent Sigma/ 2 Control S2Cb Bedienungsanleitung

ProMinent

ProMinent DULCO flex DFAa Bedienungsanleitung

ProMinent

ProMinent DULCO flex Control Bedienungsanleitung

ProMinent

ProMinent Makro TZ Bedienungsanleitung

ProMinent

ProMinent delta Betriebsanleitung

ProMinent

ProMinent gamma G/4b Bedienungsanleitung

ProMinent

ProMinent EMFa Bedienungsanleitung

ProMinent

ProMinent Dulco Flex DF2a Bedienungsanleitung

ProMinent

ProMinent SCKa Series Bedienungsanleitung

ProMinent

ProMinent Vario C Bedienungsanleitung

ProMinent

ProMinent Dulco flex DFBa Series Bedienungsanleitung

ProMinent

ProMinent Dulco Flex DF2a Bedienungsanleitung

ProMinent

ProMinent Sigma 2 S2Ca Bedienungsanleitung

ProMinent

ProMinent Makro 5 Series Bedienungsanleitung

ProMinent

ProMinent vonTaine 1010 PP Bedienungsanleitung

ProMinent

ProMinent Sigma X Bedienungsanleitung

ProMinent

ProMinent Beta BT4a Bedienungsanleitung

ProMinent

ProMinent Makro/ 5 M5Ka Bedienungsanleitung

ProMinent

ProMinent Vario d Bedienungsanleitung

ProMinent

ProMinent Makro/ 5 M5Ka Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung