ProMinent Gamma/l Handbuch

gamma/ L and Sigma with PROFIBUS®

Function blocks

Installation and configuration manual

B0288

PROFIBUS®

Parts no. 985968 BA G 032 04/11 EN

Please carefully read these operating instructions before use! · Do not discard!

The operator shall be liable for any damage caused by installation or operating errors!

Technical changes reserved.

BA Gala Profi FB, 1, en_GB

ProMinent Dosiertechnik GmbH

Im Schuhmachergewann 5-11

69123 Heidelberg

Germany

Telephone: +49 6221 842-0

Fax: +49 6221 842-617

email: [email protected]

Internet: www.prominent.com

Table of contents

1 Installation of the GSD file in Step 7 Manager................................. 4

1.1 Creating a project.................................................................... 4

1.2 Install GSD file........................................................................ 7

2 Integrating the device and the function block into your own

project............................................................................................ 11

2.1 Add PROFIBUS® Master System.......................................... 11

2.2 Connecting the device to the PROFIBUS® Master System.. 14

2.3 Copying and linking a function block..................................... 17

3 Function blocks for gamma/L and Sigmas.................................... 28

3.1 Introductory information........................................................ 28

3.2 Function block FB110 for basic functionality......................... 30

3.3 Function block FB111 for complete functionality................... 34

3.3.1 Explanations of the operating modes................................. 34

3.3.2 Tables for the addresses.................................................... 38

Table of contents

1 Installation of the GSD file in Step 7 Manager

This installation manual is only for persons who are familiar

with the Siemens Simatic S7 PLC.

Prerequisites:

The installation package (such as “Delta_S7_function_block” or Gamma‐

Sigma_S7_function_block”), with the GSD file (such as prom0B02.gsd”)

must have been downloaded from the

www.prominent.com

website. (The

installation package for the respective product is there.)

The installation package must be open on the PC and the GSD must be

copied from the installation package into a folder.

1.1 Creating a project

Installation of the GSD file in Step 7 Manager

1. Follow the path

“File

‘New Project’ Wizard...”

and click with the

mouse.

ðThe

“Introduction”

window will be displayed:

2. Click the

[Next>]

button.

ðThe window

“Which CPU are you using in your project?”

will be

displayed:

Installation of the GSD file in Step 7 Manager

3. Select the correct CPU.

When selecting the correct CPU the software version

that is imprinted on the CPU and the order number

help.

Click the

[Next>]

button.

ðThe window

“Which blocks do you want to add?”

will be dis‐

played:

4. Always place a check mark for option block OB1.

5. If the function will be called in selectable time intervals, in addition

select OB35 with a check mark (the operation blocks can vary

depending on CPU).

A more precise description of the performance scope

of the CPU is in your operating manual.

Installation of the GSD file in Step 7 Manager

6. Click the

[Next>]

button.

ðThe window

“What do you want to call your project?”

will be

displayed:

7. After a project name has been entered (in this case “Pro‐

fibus_Delta”), click the

[Finish]

button.

ðThe Simatic Manager window will open - see the following

chapter.

1.2 Install GSD file

Fig. 1: Simatic Manager with main window with navigation bar

Installation of the GSD file in Step 7 Manager

1. In Simatic Manager, in the navigation bar (left) select

“Simatic 300

Station”

ðIn the main window a symbol

“Hardware”

is displayed.

2. Double click the

“Hardware”

symbol.

ðThe Hardware Configurator will open:

Fig. 2: The Hardware Configurator

3. Follow the path

“Options

Install GSD File”

and click with the

mouse.

ðThe

“Install GSD File”

window will open:

4. Use the

[Browse]

button to select the folder into which you have

copied the GSD file. (In this screenshot the folder "Profibus Delta" is

on drive "E:").

Installation of the GSD file in Step 7 Manager

5. If the path was correct, the GSD file will be displayed in the window.

In this screenshot, this is the file “PROM0B02.gsd” for the delta (for

gamma/ L or Sigma it would be the file “PROM0596.gsd”).

6. Select the file and press the

[Install]

button.

ðA warning will be displayed stating that the action cannot be

undone:

7. Click

[Yes]

ðIf this GSD file is already present, the following message will be

displayed:

Installation of the GSD file in Step 7 Manager

8. Click

[Yes]

to install the GSD file.

ðThe following message will be displayed:

9. Click

[OK]

to conclude the installation.

10. Click

[Close]

to close the window.

The next chapter shows how you can integrate the ProMinent device

(pump, measuring transducer, etc.) into your own project.

Installation of the GSD file in Step 7 Manager

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ProMinent Wasserpumpe Handbücher

ProMinent

ProMinent mikro delta Bedienungsanleitung

ProMinent

ProMinent DULCO flex Control DFYa Verdrahtungsschema

ProMinent

ProMinent Sigma 1 Series Betriebsanleitung

ProMinent

ProMinent gamma XL Bedienungsanleitung

ProMinent

ProMinent Sigma 2 S2Cb Bedienungsanleitung

ProMinent

ProMinent von Taine 0807 PP/FKM Bedienungsanleitung

ProMinent

ProMinent Plasma PSMa Bedienungsanleitung

ProMinent

ProMinent Makro 5 Series Bedienungsanleitung

ProMinent

ProMinent Dulco Flex DF2a Bedienungsanleitung

ProMinent

ProMinent Sigma 3 S3Ba Bedienungsanleitung

ProMinent

ProMinent Sigma 1 S1Cb Bedienungsanleitung

ProMinent

ProMinent DULCOflex DFBa Series Bedienungsanleitung

ProMinent

ProMinent EXtronic EXBb Bedienungsanleitung

ProMinent

ProMinent Makro TZ Bedienungsanleitung

ProMinent

ProMinent EXtronic EXBa Bedienungsanleitung

ProMinent

ProMinent gamma/ X GMXa Bedienungsanleitung

ProMinent

ProMinent Sigma X Bedienungsanleitung

ProMinent

ProMinent DULCO Trans 40/1000 PVDF Bedienungsanleitung

ProMinent

ProMinent Sigma/3 Basic S3Ba Series Bedienungsanleitung

ProMinent

ProMinent Beta BT4b Bedienungsanleitung

ProMinent

ProMinent Sigma Series Verdrahtungsschema

ProMinent

ProMinent alpha ALPc 1001 Bedienungsanleitung

ProMinent

ProMinent Hydro/4 Bedienungsanleitung

ProMinent

ProMinent DULCO flex Control - DFXa Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung

ProMinent gamma/l Handbuch

Beliebte Wasserpumpe Handbücher anderer Marken