Promise PegasusPro R8 Bedienungsanleitung

PegasusPro R8

Product Manual

Version 1.0

Server Appliances

Promise Technology

PegasusPro R8

VTrak, Pegasus, SmartStor, SuperTrak, FastTrak, VessRAID, Vess, PerfectPATH, PerfectRAID,

SATA150, ULTRA133, VTrak S3000, BackTrak, HyperCache, HyperCache-R, HyperCache-W,

DeltaScan and GreenRAID are registered or pending trademarks of PROMISE Technology, Inc.

in the U.S. and other countries. All other trademarks are the property of their respective owners.

Information regarding products, services and offerings may be superseded by subsequent

documents and are subject to change without notice. For the latest information and specications

regarding PROMISE Technology, Inc. and any of its offerings or services, please contact your local

PROMISE ofce or the corporate headquarters. Visit www.promise.com for more information on

PROMISE products.

Important data protection information

You should back up all data before installing any drive controller or storage peripheral. PROMISE

Technology is not responsible for any loss of data resulting from the use, disuse or misuse of this or

any other PROMISE Technology product.

Notice

Although PROMISE Technology has attempted to ensure the accuracy of the content of this

document; it is possible that this document may contain technical inaccuracies, typographical, or

other errors. PROMISE Technology assumes no liability for any error in this publication, and for

damages, whether direct, indirect, incidental, consequential or otherwise, that may result from such

error, including, but not limited to loss of data or prots.

PROMISE Technology provides this publication “as is” without warranty of any kind, either express

or implied, including, but not limited to implied warranties of merchantability or tness for a

particular purpose. The published information in the manual is subject to change without notice.

PROMISE Technology reserves the right to make changes in the product design, layout, and driver

revisions without notication to its users. This version of this document supersedes all previous

versions.

Recommendations

In this Product Manual, the appearance of products made by other companies, including but not

limited to software, servers, and disk drives, is for the purpose of illustration and explanation only.

PROMISE Technology does not recommend, endorse, prefer, or support any product made by

another manufacturer.

iii

About this guidePegasusPro Product Manual

About this guide

This Product Manual describes how to setup, use, and maintain the PegasusPro R8. It also describes

how to use the PROMISE Utility Pro software that you install and run on your computer, as well as how

to perform advanced system management using the web-based user interface, WebPAM InSight.

This manual is written specically for the PegasusPro R8.

This manual includes a full table of contents, chapter task lists, and numerous cross-references to help

you nd the specic information you are looking for.

Also included are four levels of notices:

Promise Technology

PegasusPro R8

Regulatory compliance identication numbers

For the purpose of regulatory compliance certications and identication, this product has been

assigned a unique regulatory model number. The regulatory model number can be found on the

product nameplate label, along with all required approval markings and information. When requesting

compliance information for this product, always refer to this regulatory model number. The regulatory

model number is not the marketing name or model number of the product.

Compliance information

Global notice for Class A equipment

Operation of this equipment in a residential environment could cause radio interference.

About this guidePegasusPro Product Manual

Federal Communications Commission notice

Class A equipment

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

For questions regarding this FCC SDoC, contact us by mail or telephone:

• PROMISE TECHNOLOGY USA

• 3241 Keller St., Santa Clara CA 95054, USA

• Email: [email protected]

For questions regarding this product, go to the PROMISE TECHNOLOGY INC. Support Center

Website: http://www.promise.com

Promise Technology

PegasusPro R8

Canada (Avis Canadian)

Class A equipment

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations. CAN ICES-3(A)/NMB-3(A)

Cet appareil numérique de la class A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.CAN ICES-3(A)/NMB-3(A)

European Union Regulatory Notice

Class A device

A device that is marketed for use in a commercial, industrial or business environment.

A ‘Class A’ device should not be marketed for use by the general public .

vii

About this guidePegasusPro Product Manual

Safety precautions

Retain and follow all product safety and operating instructions. Always refer to the

documentation (printed or electronic) supplied with your product. If there is a conict between

this document and the product documentation, the product documentation takes precedence.

Observe all warnings on the product and in the operating instructions to reduce the risk of

bodily injury, electric shock, re, and damage to the equipment.

To reduce the risk of personal injury or damage to the product:

• Place the product away from radiators, heat registers, stoves, ampliers, or other products

that produce heat.

• Never use the product in a wet location.

• Avoid inserting foreign objects through openings in the product.

• Move products with casters carefully. Avoid quick stops and uneven surfaces.

The installation and maintenance of products must be carried out by qualied personnel.

If the product sustains damage requiring service, disconnect the product from all power

sources and refer servicing to a PROMISE TECHNOLOGY INC. authorized service provider.

Examples of damage requiring service include:

• The power cord, extension cord, or plug has been damaged.

• Liquid has been spilled on the product or an object has fallen into the product.

• The product has been exposed to rain or water.

• The product has been dropped or damaged.

• The product does not operate normally when you follow the operating instructions.

viii

Promise Technology

PegasusPro R8

Precautions for power products

Power cords

To reduce the risk of electric shock or damage to the equipment:

• Use an approved power cord. If you have questions about the type of power cord to use,

contact your PROMISE TECHNOLOGY INC. authorized service provider.

• If you have not been provided with a power cord for your product or for any AC-powered

option intended for your product, purchase a power cord that is approved for use in your

country.

• You must use a power cord rated for your product and for the voltage and current marked

on the electrical ratings label of the product. The voltage and current rating of the cord

must be greater than the voltage and current rating marked on the product.

• Do not place objects on AC power cords or cables. Arrange them so that no one may

accidentally step on or trip over them.

• Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord

by the plug.

• Make sure that the total ampere rating of all products plugged into an extension cord or

power strip does not exceed 80 percent of the ampere ratings limit for the extension cord

or power strip.

About this guidePegasusPro Product Manual

Precautions for maintaining and servicing products

To reduce the risk of electric shock or damage to the equipment when installing, maintaining,

or servicing products, observe the following precautions:

• Some products contain power supplies that are capable of producing hazardous energy

levels. Refer to the documentation included with your product to determine whether it

contains these power supplies. The installation of internal options and routine maintenance

and service of this product should be performed by individuals who are knowledgeable

about the procedures, precautions, and hazards associated with equipment containing

hazardous energy levels.

• Allow the product to cool before removing covers and touching internal components.

• Do not use conductive tools that could bridge live parts.

• Remove all watches, rings, or loose jewelry when working in hot-plug areas of an

energized server, storage, networking, or rack product.

• Some products have covers or doors to access hot-plug components and may allow

access to hazardous energy circuits or moving fans.

• The doors should remain locked during normal operation.

• • The server, storage, networking, or rack product should be installed in a controlled

access location where only qualied personnel have access.

• Power down the equipment and disconnect all power cords before removing any access

covers for non-hot-plug areas.

• Do not replace non-hot-plug components while power is applied to the product. First, shut

down the product and disconnect all power cords.

• Do not exceed the level of repair specied in the procedures in the product documentation.

All troubleshooting and repair procedures are detailed to allow only subassembly or

module-level repair. Because of the complexity of the individual boards and subassemblies,

do not attempt to make repairs at the component level or to make modications to any

printed wiring board. Improper repairs can create a safety hazard.

Promise Technology

PegasusPro R8

Batteries

Inhaltsverzeichnis

Andere Promise Netzwerkspeicherserver Handbücher

Promise

Promise ConnectStor II Bedienungsanleitung

Promise

Promise SmartStor NS4700 Bedienungsanleitung

Promise

Promise VTRAK J300S Bedienungsanleitung

Promise

Promise Smartstor NS4600 Bedienungsanleitung

Promise

Promise VSky H3970rDM Bedienungsanleitung

Promise

Promise PegasusPro R16 Bedienungsanleitung

Promise

Promise VessRAID 1740s Bedienungsanleitung

Promise

Promise ConnectStor II Bedienungsanleitung

Promise

Promise Atlas S8+ Bedienungsanleitung

Promise

Promise VSky H3970 Bedienungsanleitung

Promise

Promise E310f Bedienungsanleitung

Promise

Promise VTRAK 15100 Bedienungsanleitung

Promise

Promise VTrak J5960 Bedienungsanleitung

Promise

Promise VTRAK M610i Bedienungsanleitung

Beliebte Netzwerkspeicherserver Handbücher anderer Marken

HP NetStorage 6000 Bedienungsanleitung

Seagate

Seagate U10 ST320423A Bedienungsanleitung

Synology

Synology RackStation RS816 Handbuch

D-Link

D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung

Avid Technology

Avid Technology VideoRAID ST Sicherheitsleitfaden

Western Digital

Western Digital My Cloud Home Duo Bedienungsanleitung

PrimeArray

PrimeArray 4xxx Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung

Planex

Planex MZK-NAS01SG Bedienungsanleitung

Intel

Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung

Synology

Synology RS2212+ Bedienungsanleitung

Allnet

Allnet ALL69000 Bedienungsanleitung

Adaptec

Adaptec 5325301580 Bedienungsanleitung

Motorola

Motorola EXORdisk II Bedienungsanleitung

Sony

Sony XDAAI1PK Bedienungsanleitung

Cisco

Cisco Linksys NAS200 Original Betriebsanleitung

Sans Digital

Sans Digital MR4UT6G Bedienungsanleitung

AIC

AIC FB128-LX Bedienungsanleitung