Prorack K927 Bedienungsanleitung

K927

Fitting Kit

EN Fitting Instructions for Basic Carrier

x 1 x 1 x 2 x 1

x 4 x 4 x 1 x 4

x 2 x 2

Revision No: 2B 1

Fitting Kit K927

MAX kgs (lbs)

W/P WHD

Mitsubishi

Triton Club Cab, 4dr Ute Apr 15-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)

Triton Club Cab, 4dr Ute Apr 15-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)

Triton Double Cab, 4dr Ute Apr 15-+ AU 75 kgs (165 lbs) 100 kgs (220 lbs)

Triton Double Cab, 4dr Ute Apr 15-+ NZ 75 kgs (165 lbs) 100 kgs (220 lbs)

Fitting Kit K927

A B C 1 2 3

Triton Club Cab, 4dr Ute Apr 15-+ (AU) -240mm 300mm - 877mm 818mm -

-9 -7/16ths" 11 13/16ths" - 34 1/2ths" 32 3/16ths" -

Triton Club Cab, 4dr Ute Apr 15-+ (NZ) -240mm 300mm - 877mm 818mm -

-9 -7/16ths" 11 13/16ths" - 34 1/2ths" 32 3/16ths" -

Triton Double Cab, 4dr Ute Apr 15-+ (AU) -275mm 525mm - 877mm 795mm -

-10 -13/16ths" 20 11/16ths" - 34 1/2ths" 31 5/16ths" -

Triton Double Cab, 4dr Ute Apr 15-+ (NZ) -275mm 525mm - 877mm 795mm -

-10 -13/16ths" 20 11/16ths" - 34 1/2ths" 31 5/16ths" -

Fitting Kit EN

K927

First Time Installation

●Remove parts from inside the package and

check. Contact your dealer if any parts are

missing or damaged.

●This kit fits type A, B, C and D.

●These instructions show type A crossbar

fitted. They also apply to type B, C and D.

●Use keys to remove covers.

Fitting Kit EN

K927

●Use hex screwdriver to reverse adjusting

screw 10 turns.

●Press adjusting screw and pull crossbar

legs out. Refer to the crossbar instructions

for crossbar adjustment method.

●Ensure each end of the crossbar is

adjusted equally.

●Attaches to factory-fitted mounting points

●Please check the front of this manual for

information relating specifically to your

vehicle.

●Adjust crossbar in or out to suit vehicle.

Refer to the crossbar instructions for

crossbar adjustment.

Fitting Kit EN

K927

●Tighten adjusting screw to 2 Nm (1.5 ft lb)

hand tight.

●Remove plastic clamp block by gripping bar

leg with fingers and push firmly with

thumbs until clamp block drops out behind

leg.

●Select plastic internal block (from fitting kit)

and insert into foot.

●Repeat for all legs.

Fitting Kit EN

K927

Fitment

●Lift and pull ditch moulding back towards

you and remove from the vehicle.

●Mark a reference point for the front and

rear mounting points with a pen as shown.

●Use drill bit supplied, to drill holes in

marked positions.

Fitting Kit EN

K927

●Re-install rubber ditch mould back into roof

channel and click into place.

●Select grubscrews and screw into the

vehicle's fixed points.

●Do not over tighten.

●Repeat for all four positions.

●Use the following grubscrew lengths:

A = 70mm (2 3/4")

B = 55mm (2 1/8")

Fitting Kit EN

K927

●Refer to the underside of the pad for the

part number.

●It is important to put the pads in the correct

position on the vehicle.

●Letters refer to the pad part numbers and

position.

●Pad Part Number:

A = 218A

B = 295A

C = 296A

●Place crossbars on pads ensuring the pads

fit into the holes underneath the foot and

the grubscrew passes through the hole in

the foot.

●Repeat for all four positions.

Fitting Kit EN

K927

●Tighten the plastic knob. The side with the

nut showing should be facing up.

●Ensure the plastic knob is in the position

shown when fully tightened.

●Repeat for all legs.

●Check crossbar is securely attached to the

vehicle.

●Use keys to fit and lock covers

Inhaltsverzeichnis

Andere Prorack Autozubehör Handbücher

Prorack

Prorack K346 Bedienungsanleitung

Prorack

Prorack K072 Bedienungsanleitung

Prorack

Prorack K951 Bedienungsanleitung

Prorack

Prorack K925 Bedienungsanleitung

Prorack

Prorack K1104 Bedienungsanleitung

Prorack

Prorack K983 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung

Prorack

Prorack K868 Bedienungsanleitung

Prorack

Prorack K619 Bedienungsanleitung

Prorack

Prorack K420 Bedienungsanleitung

Prorack

Prorack J-Cradle Bedienungsanleitung

Prorack

Prorack K002 Bedienungsanleitung

Prorack

Prorack K692 Bedienungsanleitung

Prorack

Prorack K776 Bedienungs- und Installationshandbuch

Prorack

Prorack K130 Bedienungsanleitung

Prorack

Prorack K624 Bedienungs- und Installationshandbuch

Prorack

Prorack K1245 Bedienungsanleitung

Prorack

Prorack K514 Bedienungsanleitung

Prorack

Prorack K448 Bedienungs- und Installationshandbuch

Prorack

Prorack K740 Bedienungsanleitung

Prorack

Prorack K144W Bedienungs- und Installationshandbuch

Prorack

Prorack T84HALF Bedienungsanleitung

Prorack

Prorack Fitting Kit K440 Bedienungsanleitung

Prorack

Prorack K563 Bedienungs- und Installationshandbuch

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung