PSC LazerData 11000 Series Bedienungsanleitung
When you need to read a bar code
LazerData® 11000 Series
Bar Code Scanner Installation Manual
Part No. 08867
♦
Rev. A — 10/98
Fixed-PositionUnattendedBarCodeReaders
LazerData®11000 Series Bar Code Scanner
Installation Manual
ii
NOTICES
The quality of the technical information in this publication is the result of a
documentation-development process that includes careful research and review.
PSC Inc., however, reserves the right to make product-improvement changes,
which may not be reflected in this document. PSC Inc. assumes no liability for
damages arising out of, or in connection with, the application described herein.
No part of this publication may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language, in any form by any means without
the written permission of —
PSC Inc.
675 Basket Road
Webster, New York 14580-9787
Copyright 1998 by PSC Inc. All rights reserved.
This publication contains references to trademarks and trade names of several
different companies. PSC and the PSC logo are registered trademarks of PSC Inc.
All other trademarks and trade names referred to herein are the property of their
respective owners.
iii
CONTENTS
SAFETY PRECAUTIONS............................................... vi
Laser Safety....................................................................... vi
Standard Regulations......................................................... vi
1 GENERAL FEATURES.................................................1.1
1.1 Introduction......................................................................1.1
1.2 Description .......................................................................1.2
1.3 Available Models..............................................................1.3
1.4 LD11-90 Deflection Mirror...............................................1.4
2 INSTALLATION............................................................2.1
2.1 Package Contents..............................................................2.1
2.2 Guide To Installation ........................................................2.2
2.3 Mechanical Installation.....................................................2.3
2.4 Electrical Connections ......................................................2.4
2.4.1 Power Supply....................................................................2.5
2.4.2 Main Serial Interface ........................................................2.6
RS232 Interface ................................................................2.6
RS485-nonpolled Interface................................................2.8
RS485-polled Interface......................................................2.9
20-mA Current Loop Interface........................................2.11
2.4.3 Auxiliary RS232 Interface...............................................2.12
2.4.4 Inputs..............................................................................2.13
2.4.5 Outputs...........................................................................2.15
2.5 Positioning......................................................................2.16
2.6 Typical Layouts...............................................................2.17
2.6.1 Master-slave....................................................................2.18
2.6.2 Local Echo......................................................................2.19
2.6.3 Pass Through..................................................................2.20
iv
3 READING FEATURES..................................................3.1
3.1 Step Ladder Mode.............................................................3.1
3.2 Picket Fence Mode............................................................3.2
3.3 Performance......................................................................3.3
3.3.1 Optical Resolution.............................................................3.3
3.3.2 Scanning Speed.................................................................3.3
3.3.3 Raster ...............................................................................3.3
3.4 Reading Diagrams ............................................................3.4
4 MAINTENANCE............................................................4.1
4.1 Cleaning...........................................................................4.1
5 SERVICE AND WARRANTY .......................................5.1
6 TECHNICAL FEATURES.............................................6.1
v
LazerData®11000 Series Bar Code Scanner
7
56
1
8
4
3
2
Figure A. Top and Bottom External View
①Power ON/Data TX LED ⑤Warning and Device Class Labels
②Presence Sensor LED ⑥Accessory Mounting Holes
③Good Read LED ⑦Laser Beam Output Window
④Laser ON LED ⑧Mounting Holes
vi
SAFETY PRECAUTIONS
LASER SAFETY
The following information is provided to comply with the rules imposed by
international regulatory agencies and refers to the correct use of the LazerData®
11000 Series Bar Code Scanner.
Standard Regulations
This scanner utilizes a low-power laser diode. Although staring directly at the laser
beam momentarily causes no known biological damage, avoid staring at the beam
as one would with any very strong light source, such as the sun. Prevent the laser
beam from hitting the eye of any observer, even when the beam is reflected from
surfaces such as mirrors, etc.
This product conforms to the applicable requirements of both IEC 825-1 and CDRH
21 CFR 1040 at the date of manufacture. The scanner is classified as a Class 2 laser
product according to IEC 825-1 regulations and as a Class II laser product
according to CDRH regulations.
There is a safety device that allows the laser to be switched on only if the motor is
rotating above the threshold of its correct scanning speed.
The laser beam can be switched off with a software command (see also “Beam
Shutter” in the LDHOST Help Online).
vii
WARNING
Use of controls or adjustments or performance of procedures
other than those specified herein may result in exposure to
hazardous visible laser light.
The laser light is visible to the human eye and is emitted from the window on the
front of the scanner (Figure A.,
i
).
Warning labels (Figure B.) indicating exposure to laser light and the device
classification are applied onto the body of the scanner (Figure A.,
g
).
CAUTION - LASER LIGHT WHEN OPEN
AVOID EXPOSURE TO BEAM
LISTED
ACCESSORY
45AF
I.T.E.
This product complies with 21 CF
R
Subchapter J.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAX. OUTPUT RADIATION 1 mW
EMITTED WAVE LENGTH 630~680 nm
TO IEC 825-1 (1993)
R
UL
R
UL
Figure B. Warning and device class labels
Disconnect the power supply when opening the device during maintenance or
installation to avoid exposure to hazardous laser light.
viii
The laser diode used in this device is classified as a class 3B laser product
according to IEC 825-1 regulations and as a Class IIIb laser product according to
CDRH regulations. As it is not possible to apply a classification label on the laser
diode used in this device, the following label (Figure C.) is reproduced here.
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAX. OUTPUT RADIATION 7 mW
EMITTED WAVE LENGTH 630~680 nm
TO IEC 825-1 (1993)
Figure C. Laser diode class label
Any violation of the optic parts in particular can cause radiation up to the
maximum level of the laser diode (7 mW at 630 to 680 nm).
POWER SUPPLY
- Models LD110X11- LD110X16:
This accessory device is intended to be supplied by a UL Listed Power Unit with
“Class 2” or LPS power source which supplies power directly to the scanner via
the 25-pin connector.
- Models LD110X17 and LD110X18:
This accessory device is intended to be supplied by a UL Listed Power Unit with
“Class 2” or LPS power source which supplies power directly to the scanner via the
9-pin connector.
Installation Manual LazerData®11000 Scanner
General Features - 1.1
1 GENERAL FEATURES
1.1 INTRODUCTION
The LazerData®11000 Series Bar Code Scanner is a bar code reader complete with
decoder, available in several standard models. These were designed to satisfy
demanding requirements associated with high performance scanning.
C Programmability
The LazerData 11000 Scanner belongs to the generation of PSC Automation
scanners that operate under the 'C' programming environment, a recognized
industry standard.
Standard Application Program
A standard application program is factory-loaded onto the scanner. This program
controls bar code reading, serial port interfacing, data formatting, and many other
operating and control parameters.
It is completely configurable from a host computer through the LDHOST utility
program provided on diskette with the scanner, or through ESC sequences via the
serial interface.
Custom Application Programs
If the Standard Application Program doesn’t meet your requirements, please
contact your local PSC Automation, Inc. distributor.
Inhaltsverzeichnis
Andere PSC Barcode-Lesegerät Handbücher
PSC
PSC Magellan 2200VS omega Installations- und Betriebshandbuch
PSC
PSC QS200 Betriebsanleitung
PSC
PSC PowerScanTM RF Bedienungsanleitung
PSC
PSC LazerData 12000 Series Bedienungsanleitung
PSC
PSC HS1250, Bedienungsanleitung
PSC
PSC QuickScan QS2500 Installations- und Betriebshandbuch
PSC
PSC magellan 8100 Bedienungsanleitung
PSC
PSC LazerData Series 9000E Bedienungsanleitung
PSC
PSC PowerScan Handheld Betriebsanleitung
PSC
PSC QuickScan 6000 Bedienungsanleitung
PSC
PSC SP400rf Betriebsanleitung
PSC
PSC Magellan 2300HS Bedienungsanleitung
PSC
PSC Duet Bedienungsanleitung
PSC
PSC VS800 Bedienungsanleitung
PSC
PSC vs1200 Bedienungsanleitung
PSC
PSC QuickScan QS6500 Bedienungsanleitung
PSC
PSC QuickScan QS2500 Installations- und Betriebshandbuch
PSC
PSC Magellan 2200VS omega Bedienungsanleitung
PSC
PSC PSRF-1000 Benutzerhandbuch
PSC
PSC Falcon 4410 Montage- und Bedienungsanleitung
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
